Steyr 4095 Multi
The Steyr 4095 Multi is a tractor produced by Steyr. It is equipped with a 207.5 ci 3.4 L engine. The listed engine power is Diesel (gross): 99 hp / 73.8 kW. Transmission: 32 forward and reverse. Operating weight: 9921 lbs 4500 kg.
Engine Power
Diesel (gross): 99 hp / 73.8 kW
Fuel & Capacities
39.6 gal
149.9 L
Transmission
32 forward and reverse
Operating Weight
9921 lbs
4500 kg
Overview
 | 2013 - 2015
Multi SeriesUtility tractor
Multi Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Steyr |
Utility tractor | |
Built in Saint Valentin, Austria | |
Steyr 4095 Multi Engine | |
|---|---|
Iveco 3.4L 4-cyl diesel | |
Fuel tank | 39.6 gal
149.9 L |
Engine details ...  | |
Steyr 4095 Multi Transmission | |
|---|---|
32-speed four-speed power shift | |
Transmission details ...  |
Steyr 4095 Multi Power | |
|---|---|
Engine (gross) | 99 hp
73.8 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | electro-hydraulic |
Power steering | |
Wet disc brakes | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | open center |
closed center load-sensing OptOptional | |
Rear valves | 4 (max) |
Mid valves | 2 (max) |
Pump flow | 15.85 gpm
60.0 lpm |
26.4 gpm*Optional, with closed center system.
99.9 lpm | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E/1000/1000E |
Engine RPM | 540@1805 |
540E@1542 | |
1000@1880 | |
1000E@1606 | |
Front PTO | independent OptOptional |
Front PTO Type | 1000 |
Engine RPM | 1000@1920 |
Dimensions & Tires | |
|---|---|
Wheelbase | 95.3 inches
242 cm |
Weight | 9921 lbs
4500 kg |
Front tire | 480/65R24 |
Rear tire | 540/65R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Engine
Engine Detail — 207.5 ci / 3.4 L Diesel
Manufacturer | Iveco |
Configuration | turbocharged intercooled diesel, 4-cylinder, liquid-cooled |
Displacement | 207.5 ci
3.4 L |
Bore/Stroke | 3.90x4.33 inches
99 x 110 mm |
Rated Power (gross) | 99 hp
73.8 kW |
Rated RPM | 2200 |
Torque | 300 lb-ft
406.8 Nm |
Torque RPM | 1500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 32 forward and reverse four-speed power shift
Type | four-speed power shift |
Gears | 32 forward and reverse |
four gears in four ranges, with an additional two-range shift. | |
Dimensions
Steyr 4095 Multi Tires | |
|---|---|
Standard tires (ag) | Front: 480/65R24. Rear: 540/65R38 |
Dimensions | |
|---|---|
Wheelbase | 95.3 inches
242 cm |
Length | 173.4 inches
440 cm |
Width | 82.7 inches
210 cm |
Height (cab) | 107.3 inches
272 cm |
107.9 inches*With cab suspension.
274 cm | |
Ground clearance | 18.1 inches
45 cm |
Front tread | 69 inches
175 cm |
Rear tread | 64.2 inches
163 cm |
Steyr 4095 Multi Weight | |
|---|---|
Shipping | 9921 lbs
4500 kg |
Max capacity | 16535 lbs
7500 kg |
17196 lbsOptOptional
7800 kg | |
Photos
Steyr 4095 Multi tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Steyr 4095 Multi based on its 99 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Steyr 4095 Multi.
Estimated Continuous Field Runtime: 7.7 hrs
Approximately 7.7 hours of continuous field operation at ~75% rated power on a full tank (39.6 gal / 149.9 L).
Estimated 75% Load Fuel Burn~5.1 gal/hr (19.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Steyr 4095 Multi Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Steyr 4095 Multi.
Converted Equivalents:
Horsepower (HP)99 hp
Kilowatts (kW)73.8 kW
Metric Horsepower (PS / CV)100.4 PS
Direct Competitor Comparison
Compare Steyr 4095 Multi against same-era industry alternatives in the same horsepower class.
Current Model
Steyr
Steyr 4095 Multi
Engine Power:Diesel (gross): 99 hp / 73.8 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 786
Engine Power:89.1
Production Years:1980 - 1981
Related models
Steyr 8090
- Power:
- 80
- Production years:
- 1983 - 1992
Steyr 980
- Power:
- 80
- Production years:
- 1974 - 1977
Steyr 485
- Power:
- 82
- Production years:
- 2005 - 2008
Steyr 9080M
- Power:
- 82
- Production years:
- 2003 - 2007
Steyr M 9083
- Power:
- 83
- Production years:
- 1994 - 1995