Steyr 6160 CVT

The Steyr 6160 CVT is a tractor produced by Steyr. It is equipped with a 402.8 ci 6.6 L engine. The listed engine power is Diesel (gross): 160 hp / 119.3 kW. Transmission: infinite forward and reverse. Operating weight: 14308 lbs 6490 kg.

Engine Power
Diesel (gross): 160 hp / 119.3 kW
Fuel & Capacities
81.9 gal 310.0 L
Transmission
infinite forward and reverse
Operating Weight
14308 lbs 6490 kg

Overview

No photo available
2007 - 2012 Utility tractor
Production
Manufacturer
Steyr
Utility tractor
Steyr 6160 CVT Engine
Sisu 6.6L 6-cyl diesel
Fuel tank
81.9 gal 310.0 L
Engine details ...
Steyr 6160 CVT Transmission
continuously variable transmission (CVT)
Transmission details ...
Steyr 6160 CVT Power
Engine (gross)
160 hp 119.3 kW
Engine (max)
183 hp 136.5 kW
Mechanical
Four-wheel drive
Power steering
Hydraulic wet disc brakes
Trailer brakes
pneumatic OptOptional
hydraulic OptOptional
Steyr luxury cab standard with air-conditioning.
Hydraulics
Valves
8 (max)
Pump flow
27.7 gpm 104.8 lpm
Tractor hitch
Rear Type
III/II
Rear lift
21830 lbs 9902 kg
Front lift
8822 lbs 4001 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/540E/1000/1000E (1.375)
Engine RPM
540@1878
540E@1608
1000@1869
1000E@1600
Front PTO
independent OptOptional
Front PTO Type
1000
Dimensions & Tires
Wheelbase
110.5 inches 280 cm
Weight
14308 lbs 6490 kg
Front tire
540/65
Rear tire
650/65
Full dimensions and tires ...
Electrical
Ground
electric
Charging system
alternator

Engine

Engine Detail — 402.8 ci / 6.6 L Diesel

Manufacturer
Sisu
Configuration
turbocharged intercooled diesel, 6-cylinder, liquid-cooled
Displacement
402.8 ci 6.6 L
Bore/Stroke
4.25x4.72 inches 108 x 120 mm
Rated Power (gross)
160 hp 119.3 kW
Maximum Power (gross)
183 hp 136.5 kW
Rated RPM
2100
Operating RPM
1800-2100
Torque
497.9 lb-ft 675.2 Nm
Torque RPM
1400
Starter type
negative

Transmission

Transmission — infinite forward and reverse continuously variable transmission (CVT)

Type
continuously variable transmission (CVT)
Gears
infinite forward and reverse

Dimensions

Steyr 6160 CVT Tires
Ag front
540/65 R28
Ag rear
650/65 R38
Dimensions
Wheelbase
110.5 inches 280 cm
Length
188 inches 477 cm
Width
100.4 inches 255 cm
Height
119.8 inches 304 cm
Shipping weight
14308 lbs 6490 kg
Max weight
25353 lbs 11500 kg
Front tread
74.7 inches 189 cm
Rear tread
73.6 inches 186 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Steyr 6160 CVT based on its 160 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
5 to 7 Bottom (18")5 - 7 铧 (45 cm)Commercial / Field ScaleLarge acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing
15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼Commercial / Field ScaleLarge commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙Commercial / Field ScaleWide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage
Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)Commercial / Field ScaleHigh-capacity commercial forage harvesting (1000 RPM PTO).
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Steyr 6160 CVT.

Estimated Continuous Field Runtime: 9.8 hrs

Approximately 9.8 hours of continuous field operation at ~75% rated power on a full tank (81.9 gal / 310 L).

Estimated 75% Load Fuel Burn~8.3 gal/hr (31.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Steyr 6160 CVT Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Steyr 6160 CVT.

Converted Equivalents:

Horsepower (HP)160 hp
Kilowatts (kW)119.3 kW
Metric Horsepower (PS / CV)162.2 PS

Direct Competitor Comparison

Compare Steyr 6160 CVT against same-era industry alternatives in the same horsepower class.

Current Model
Steyr

Steyr 6160 CVT

Engine Power:Diesel (gross): 160 hp / 119.3 kW
★ Baseline Reference
DeereMarket Competitor

Deere 4250

Engine Power:144
Production Years:1983 - 1988
International HarvesterMarket Competitor

International Harvester 1086

Engine Power:144.4
Production Years:1976 - 1981
Massey FergusonMarket Competitor

Massey Ferguson 3650

Engine Power:144.4
Production Years:1987 - 1990
CaseIHMarket Competitor

CaseIH 7110

Engine Power:144.4
Production Years:1987 - 1993