Steyr 8180
The Steyr 8180 is a tractor produced by Steyr. It is equipped with a 402.5 ci 6.6 L engine. The listed engine power is Diesel (listed): 165 hp / 123.0 kW. Transmission: 36 forward and 12 reverse. Operating weight: 13770 lbs 6246 kg.
Engine Power
Diesel (listed): 165 hp / 123.0 kW
Fuel & Capacities
63.4 gal
240.0 L
Transmission
36 forward and 12 reverse
Operating Weight
13770 lbs
6246 kg
Overview
 | 1987 - 1993
8000 Series |
|---|
Production | |
|---|---|
Manufacturer | Steyr |
Steyr 8180 Engine | |
|---|---|
Steyr 6.6L 6-cyl diesel | |
Fuel tank | 63.4 gal
240.0 L |
Engine details ...  | |
Steyr 8180 Transmission | |
|---|---|
36-speed synchromech | |
Transmission details ...  |
Steyr 8180 Power | |
|---|---|
Engine | 165 hp
123.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | planetary |
Differential lock | mechanical front and rear |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard | |
Hydraulics | |
|---|---|
Type | open center |
Total flow | 11.6 gpm
43.9 lpm |
15.9 gpmOptOptional
60.2 lpm | |
Tractor hitch | |
|---|---|
Rear Type | III |
Rear lift | 14332.5 lbs
6501 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | hydraulic wet disc |
Rear PTO Type | 540/1000 (1.375) |
Engine RPM | 1000@1826 |
Dimensions & Tires | |
|---|---|
Wheelbase | 106.3 inches
270 cm |
Weight | 13770 lbs
6246 kg |
Front tire | 18.4R28 |
Rear tire | 20.8R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 55 |
Batteries | 2 |
Battery volts | 12 |
Engine
Engine Detail — 402.5 ci / 6.6 L Diesel
Manufacturer | Steyr WD 612.96 |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 402.5 ci
6.6 L |
Bore/Stroke | 4.25x4.72 inches
108 x 120 mm |
Power | 165 hp
123.0 kW |
Rated RPM | 2200 |
Idle RPM | 600-2380 |
Torque | 468 lb-ft
634.6 Nm |
Torque RPM | 1400 |
Starter volts | 12 |
Transmission
Transmission — 36 forward and 12 reverse synchromech
Type | synchromech |
Gears | 36 forward and 12 reverse |
Dimensions
Steyr 8180 Tires | |
|---|---|
Ag front | 18.4R28 |
Ag rear | 20.8R38 |
Dimensions | |
|---|---|
Wheelbase | 106.3 inches
270 cm |
Length | 207.9 inches
528 cm |
Height | 113.0 inches
287 cm |
Weight | 13770 lbs
6246 kg |
Photos
Steyr 8180, left side.
Steyr 8180, right side.
Recommended Implements & Sizing Guide
Engineering recommendations for Steyr 8180 based on its 165 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Steyr 8180.
Estimated Continuous Field Runtime: 7.4 hrs
Approximately 7.4 hours of continuous field operation at ~75% rated power on a full tank (63.4 gal / 240 L).
Estimated 75% Load Fuel Burn~8.6 gal/hr (32.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Steyr 8180 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Steyr 8180.
Converted Equivalents:
Horsepower (HP)165 hp
Kilowatts (kW)123 kW
Metric Horsepower (PS / CV)167.3 PS
Direct Competitor Comparison
Compare Steyr 8180 against same-era industry alternatives in the same horsepower class.
Current Model
Steyr
Steyr 8180
Engine Power:Diesel (listed): 165 hp / 123.0 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 5088
Engine Power:150
Production Years:1981 - 1985
Related models
Steyr 4130 Profi
- Power:
- 132
- Production years:
- 2007 - 2015
Steyr 4120 Profi CVT
- Power:
- 133
- Production years:
- 2012 - 2015
Steyr 4135 Profi
- Power:
- 135
- Production years:
- 2016 - 2026
Steyr 4135 Profi CVT
- Power:
- 135
- Production years:
- 2016 - 2026
Steyr 8150
- Power:
- 135
- Production years:
- 1982 - 1993