Troy-Bilt GTX 18

The Troy-Bilt GTX 18 is a tractor produced by Troy Bilt Lawn Tractors. It is equipped with a 691 cc 42.18 ci engine. The listed engine power is Gasoline (gross): 18 hp / 13.4 kW. Transmission: Eaton 11. Operating weight: 765 lbs 347 kg.

Engine Power
Gasoline (gross): 18 hp / 13.4 kW
Fuel & Capacities
4.3 gal 16.3 L
Transmission
Eaton 11
Operating Weight
765 lbs 347 kg

Overview

Troy-Bilt GTX 18 tractor photo
1994 - 2001 GTX SeriesGarden tractor GTX Series Garden tractor
Production
Manufacturer
Troy-Bilt
Garden tractor
Built in Port Washington, Wisconsin, USA
Original price was $6,300 in 2000
The Troy-Bilt GTX 18 carried model numbers 13060 (early) and 13074 (late).
Variants
GT-1800
similar Bolens model
Troy-Bilt GTX 18 Engine
18HP Kohler 691cc 2-cyl gasoline
Fuel tank
4.3 gal 16.3 L
Engine details ...
Troy-Bilt GTX 18 Transmission
hydrostatic
Transmission details ...
Mechanical
Two-wheel drive
Power steering
Open operator station.
Tractor hitch
Rear Type
0 OptOptional
Type
sleeve hitch OptOptional
Power Take-off (PTO)
Front PTO
independent
Clutch
electro-magnetic
Front PTO Type
shaft
Engine RPM
2000@3600
Dimensions & Tires
Wheelbase
49 inches 124 cm
Weight
765 lbs 347 kg
Front tire
16x6.50-8
Rear tire
23x10.50-12
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
References
GTX 18 references literature
Owner/Operator Manual 14066 Front End Loader (1768332) published in 1993
Tractors published in 1995, by Troy-Bilt
Owner/Operator Manual GTX Garden Tractor (1767408) published in 1994
Owner/Operator Manual GTX Garden Tractor (770-1177A) published in 1998

Engine

Engine Detail — 691 cc / 42.18 ci Gasoline

Manufacturer
Kohler M18QS
Fuel Type
Gasoline
Configuration
2-cylinder, air-cooled horizontal-shaft opposed-twin
Displacement
691 cc 42.18 ci
Bore/Stroke
3.12x2.75 inches 79 x 70 mm
Power (gross)
18 hp 13.4 kW
Starter
electric
Starter volts
12
Oil capacity
1.75 qts 1.7 L

Transmission

Transmission — Eaton 11

Transmission
Eaton 11
Type
shaft-driven hydrostatic
Gears
infinite forward and reverse
Oil capacity
8 qts 7.6 L
Oil type
Mobilfluid 423
Oil change
100 h
GTX 18 11 shaft-driven hydrostatic speeds
Mobilfluid 423

Dimensions

Troy-Bilt GTX 18 Tires
Lawn/turf front
16x6.50-8
Lawn/turf rear
23x10.50-12
Dimensions
Wheelbase
49 inches 124 cm
Length
76.8 inches 195 cm
Width
38.5 inches 97 cm
Height
47.8 inches 121 cm
Shipping weight
765 lbs 347 kg

Attachments

Attachment overview
42" mid-mount mower deck
48" mid-mount mower deck
Snowblower
Blade
Front-end loader
The GTX 18 was compatible with model 14065 33-inch shaft-drive tiller.

Photos

Troy-Bilt GTX 18 tractor photo

Troy-Bilt GTX 18 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Troy Bilt Lawn Tractors Troy-Bilt GTX 18 based on its 18 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
4 ft (48 in)1.2 mLight DutyPasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep
42 to 48 in105 - 120 cmLight DutyCovers compact tractor tire width.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Troy Bilt Lawn Tractors Troy-Bilt GTX 18.

Estimated Continuous Field Runtime: 4.6 hrs

Approximately 4.6 hours of continuous field operation at ~75% rated power on a full tank (4.3 gal / 16.3 L).

Estimated 75% Load Fuel Burn~0.9 gal/hr (3.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Troy Bilt Lawn Tractors Troy-Bilt GTX 18 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Troy Bilt Lawn Tractors Troy-Bilt GTX 18.

Converted Equivalents:

Horsepower (HP)18 hp
Kilowatts (kW)13.4 kW
Metric Horsepower (PS / CV)18.2 PS

Direct Competitor Comparison

Compare Troy-Bilt GTX 18 against same-era industry alternatives in the same horsepower class.

Current Model
Troy Bilt Lawn Tractors

Troy-Bilt GTX 18

Engine Power:Gasoline (gross): 18 hp / 13.4 kW
★ Baseline Reference
KubotaMarket Competitor

Kubota B72

Engine Power:16.2
Production Years:1998 - 2001
Massey FergusonMarket Competitor

Massey Ferguson 1120

Engine Power:16.6
Production Years:1993 - 1996
International HarvesterMarket Competitor

International Harvester Type A 15HP

Engine Power:16.7
Production Years:1908 - 1911
MitsubishiMarket Competitor

Mitsubishi GF17

Engine Power:16.2
Production Years:2004 - 2005