Upton 180
The Upton 180 is a tractor produced by Upton. It is equipped with a 302 ci 4.9 L engine. The listed engine power is Diesel (listed): 180 hp / 134.2 kW. Transmission: 21 forward and 9 reverse. Operating weight: 18500 lbs 8391 kg.
Engine Power
Diesel (listed): 180 hp / 134.2 kW
Fuel & Capacities
Diesel
Transmission
21 forward and 9 reverse
Operating Weight
18500 lbs
8391 kg
Overview
![]() | Standard-tread tractor | Standard-tread tractor |
|---|
Production | |
|---|---|
Manufacturer | Upton |
Standard-tread tractor | |
Built in Corowa, New South Wales, Australia | |
Upton 180 Engine | |
|---|---|
Nissan 4.9L 4-cyl diesel | |
Engine details ... |
Upton 180 Transmission | |
|---|---|
21-speed | |
Transmission details ... |
Upton 180 Power | |
|---|---|
Engine | 180 hp
134.2 kW |
Mechanical | |
|---|---|
Two-wheel drive |
Hydraulics | |
|---|---|
Pressure | 2500 psi
172.4 bar |
Total flow | 20 gpm
75.7 lpm |
Dimensions & Tires | |
|---|---|
Weight | 18500 lbs
8391 kg |
Front tire | 11.00x16 |
Rear tire | 18.4x34 |
Full dimensions and tires ... | |
Engine
Engine Detail — 302 ci / 4.9 L Diesel
Manufacturer | Nissan UD43 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Two-stroke diesel engine. | |
Displacement | 302 ci
4.9 L |
Bore/Stroke | 4.33x5.118 inches
110 x 130 mm |
Power | 180 hp
134.2 kW |
Compression | 16:1 |
Rated RPM | 2400 |
Torque | 458 lb-ft
621.0 Nm |
Torque RPM | 1400 |
Transmission
Transmission — 21 forward and 9 reverse
Gears | 21 forward and 9 reverse |
The Upton 180 used military-surplus gear boxes. The first gearbox offered four-forward and one-reverse speed. The second gearbox offered five-forward and one-reverse gear. This arrangement offered 21 forward and nine reverse gear combinations. The original rear gearbox was a Spicer from the LVT-4 landing craft. Later, Mack gearboxes from the M3 tank were used. | |
Dimensions
Upton 180 Tires | |
|---|---|
Ag front | 11.00x16 |
Ag rear | 18.4x34 |
18.4x38 | |
Dimensions | |
|---|---|
Length | 180 inches
457 cm |
Width | 153.75 inches
390 cm |
Height | 88 inches
223 cm |
Weight | 18500 lbs
8391 kg |
Ground clearance | 16 inches
40 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Upton 180 based on its 180 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Upton 180.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Upton 180 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Upton 180.
Converted Equivalents:
Horsepower (HP)180 hp
Kilowatts (kW)134.2 kW
Metric Horsepower (PS / CV)182.5 PS
Direct Competitor Comparison
Compare Upton 180 against same-era industry alternatives in the same horsepower class.
Current Model
Upton
Upton 180
Engine Power:Diesel (listed): 180 hp / 134.2 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 1486
Engine Power:162.2
Production Years:1976 - 1981
Massey FergusonMarket Competitor
Massey Ferguson 6S.165
Engine Power:162.3
Production Years:2022 - 2026
Related models
Upton HT-14/350
- Power:
- 350
- Production years:
- 1978 - 1978
Upton 225
- Power:
- 225
- Production years:
- 1969 - 1979
Upton Heavy Harry
- Power:
- -1
Upton MT-855
- Power:
- -1





