Ursus 1014
The Ursus 1014 is a tractor produced by Ursus. It is equipped with a 278.4 ci 4.6 L engine. The listed engine power is Diesel (listed): 96 hp / 71.6 kW. Transmission: 16 forward and 8 reverse. Operating weight: 8,974 lbs 4070 kg.
Engine Power
Diesel (listed): 96 hp / 71.6 kW
Fuel & Capacities
23.8 gal
90.1 L
Transmission
16 forward and 8 reverse
Operating Weight
8,974 lbs
4070 kg
Overview
 | 1984 - 2009 |
|---|
Production | |
|---|---|
Manufacturer | Ursus |
Built in Warsaw, Poland | |
Ursus 1014 Engine | |
|---|---|
4.6L 4-cyl diesel | |
Fuel tank | 23.8 gal
90.1 L |
Engine details ...  | |
Ursus 1014 Transmission | |
|---|---|
16-speed two-speed power shift | |
Transmission details ...  |
Ursus 1014 Power | |
|---|---|
Engine | 96 hp
71.6 kW |
PTO (claimed) | 84 hp
62.6 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Hydraulic dry disc brakes | |
Cab standard with heater. |
Hydraulics | |
|---|---|
Pump flow | 10.8 gpm
40.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 6725 lbs
3050 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Engine RPM | 540@1890 |
1000@1920 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 94 inches
238 cm |
Weight | 8,974 lbs
4070 kg |
Front tire | 11.00-16 |
2WD Rear tire | 18.4-34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 42 |
Batteries | 2 |
Battery volts | 6 |
Battery AH | 190 |
Engine
Engine Detail — 278.4 ci / 4.6 L Diesel
Manufacturer | Z8002.1 |
Configuration | turbocharged diesel, 4-cylinder |
Displacement | 278.4 ci
4.6 L |
Bore/Stroke | 4.33x4.72 inches
110 x 120 mm |
Power | 96 hp
71.6 kW |
Compression | 17:1 |
Rated RPM | 2200 |
Torque | 247.8 lb-ft
336.0 Nm |
Torque RPM | 1600 |
Starter volts | 12 |
Transmission
Transmission — 16 forward and 8 reverse two-speed power shift
Type | two-speed power shift |
Gears | 16 forward and 8 reverse |
Clutch | 350mm dry disc |
Four gears (1-4) in two ranges (low/high), plus reverse range, with two-speed hydraulic power shift. | |
With 18.4-34 rear tires. | |
 | |
Dimensions
Ursus 1014 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 11.00-16. Rear: 18.4-34 |
4WD Standard tires (ag) | Front: 12.4-24. Rear: 18.4-34 |
Dimensions | |
|---|---|
Wheelbase | 94 inches
238 cm |
Length | 156 inches
396 cm |
Height | 106 inches
269 cm |
Weight | 8,974 lbs
4070 kg |
Photos
Ursus 1014 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Ursus 1014 based on its 96 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Ursus 1014.
Estimated Continuous Field Runtime: 4.8 hrs
Approximately 4.8 hours of continuous field operation at ~75% rated power on a full tank (23.8 gal / 90.1 L).
Estimated 75% Load Fuel Burn~5 gal/hr (18.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Ursus 1014 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Ursus 1014.
Converted Equivalents:
Horsepower (HP)96 hp
Kilowatts (kW)71.6 kW
Metric Horsepower (PS / CV)97.3 PS
Direct Competitor Comparison
Compare Ursus 1014 against same-era industry alternatives in the same horsepower class.
Current Model
Ursus
Ursus 1014
Engine Power:Diesel (listed): 96 hp / 71.6 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 844-S
Engine Power:87
Production Years:1975 - 1989
Related models
Ursus 932
- Power:
- 78.9
- Production years:
- 1991 - 2003
Ursus 934
- Power:
- 78.9
- Production years:
- 1991 - 2009
Ursus 5712
- Power:
- 79.8
- Production years:
- 2002 - 2009
Ursus 5714
- Power:
- 79.8
- Production years:
- 2002 - 2009
Ursus 914
- Power:
- 80
- Production years:
- 1984 - 1998