Valmet 68
The Valmet 68 is a tractor produced by Valmet. It is equipped with a 179.5 ci 2.9 L engine. The listed engine power is Diesel (listed): 60.2 hp / 44.9 kW. Transmission: 6 forward and 2 reverse. Operating weight: 5556 lbs 2520 kg.
Engine Power
Diesel (listed): 60.2 hp / 44.9 kW
Fuel & Capacities
21.1 gal
79.9 L
Transmission
6 forward and 2 reverse
Operating Weight
5556 lbs
2520 kg
Overview
 | 1981 - 1987
8 SeriesUtility tractor
8 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Valmet |
Utility tractor | |
Built in Brazil | |
Valmet 68 Engine | |
|---|---|
MWM 2.9L 3-cyl diesel | |
Engine details ...  |
Valmet 68 Transmission | |
|---|---|
6-speed synchronized | |
Transmission details ...  |
Valmet 68 Power | |
|---|---|
Engine | 60.2 hp
44.9 kW |
PTO (claimed) | 42.4 hp (540 RPM)
31.6 kW |
51.4 hp (max)
38.3 kW | |
Mechanical | |
|---|---|
Two-wheel drive | |
Steering | manual |
Steering | power OptOptional |
Dry disc brakes | |
Four-post ROPS. | |
Capacity | |
|---|---|
Fuel | 21.1 gal
79.9 L |
Hydraulic system | 4.5 gal
17.0 L |
Hydraulics | |
|---|---|
Capacity | 4.5 gal
17.0 L |
Pump flow | 6.7 gpm
25.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 3307 lbs
1500 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 79.3 inches
201 cm |
Weight | 5556 lbs
2520 kg |
Front tire | 7.50-16 |
Rear tire | 14.9-28 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 179.5 ci / 2.9 L Diesel
Manufacturer | MWM D229 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 179.5 ci
2.9 L |
Power | 60.2 hp
44.9 kW |
Compression | 16.6:1 |
Rated RPM | 2300 |
Torque | 152 lb-ft
206.1 Nm |
Torque RPM | 1400 |
Oil capacity | 7.4 qts
7.0 L |
Coolant capacity | 11.1 qts
10.5 L |
Transmission
Transmission — 6 forward and 2 reverse synchronized
Type | synchronized |
Gears | 6 forward and 2 reverse |
Three gears, plus reverse, in three ranges. | |
 | |
Dimensions
Valmet 68 Tires | |
|---|---|
Ag front | 7.50-16 |
Ag rear | 14.9-28 |
Ag front | 7.50-18 |
Ag rear | 16.9-30 |
Dimensions | |
|---|---|
Wheelbase | 79.3 inches
201 cm |
Length | 150.8 inches
383 cm |
Width | 75.8 inches
192 cm |
Height | 98.9 inches
251 cm |
Weight | 5556 lbs
2520 kg |
Ballasted weight | 6680 lbs
3030 kg |
Ground clearance | 15.9 inches
40 cm |
Front tread | 55.5 to 71.3 inches
140 to 181 cm |
Rear tread | 56.3 to 76.4 inches
143 to 194 cm |
Photos
Valmet 68 utility tractor.
Valmet 68 with tiller, right-rear view.
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 68 based on its 60.2 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 68.
Estimated Continuous Field Runtime: 6.7 hrs
Approximately 6.7 hours of continuous field operation at ~75% rated power on a full tank (21.1 gal / 79.9 L).
Estimated 75% Load Fuel Burn~3.1 gal/hr (11.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 68 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 68.
Converted Equivalents:
Horsepower (HP)60.2 hp
Kilowatts (kW)44.9 kW
Metric Horsepower (PS / CV)61 PS
Direct Competitor Comparison
Compare Valmet 68 against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 68
Engine Power:Diesel (listed): 60.2 hp / 44.9 kW
★ Baseline Reference
Related models
Valmet 205
- Power:
- 49
- Production years:
- 1989 - 1991
Valmet 504
- Power:
- 49
- Production years:
- 1982 - 1985
Valmet 255
- Power:
- 53
- Production years:
- 1992 - 1994
Valmet 305
- Power:
- 53
- Production years:
- 1985 - 1991
Valmet 500
- Power:
- 54
- Production years:
- 1968 - 1971