Valmet 755
The Valmet 755 is a tractor produced by Valmet. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 90 hp / 67.1 kW. Transmission: 16 forward and 8 reverse. Operating weight: 8,179 lbs 3709 kg.
Engine Power
Diesel (listed): 90 hp / 67.1 kW
Fuel & Capacities
37 gal
140.0 L
Transmission
16 forward and 8 reverse
Operating Weight
8,179 lbs
3709 kg
Overview
 | 1989 - 1991
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Valmet |
Row-Crop tractor | |
Valmet 755 Engine | |
|---|---|
Valmet 4.4L 4-cyl diesel | |
Fuel tank | 37 gal
140.0 L |
Engine details ...  | |
Valmet 755 Transmission | |
|---|---|
16-speed | |
Transmission details ...  |
Valmet 755 Power | |
|---|---|
Engine | 90 hp
67.1 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive |
Hydraulics | |
|---|---|
Pump flow | 12.2 gpm
46.2 lpm |
Tractor hitch | |
|---|---|
Rear lift | 9,921 lbs
4500 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540, 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 94.1 inches
239 cm |
91.7 inches (4WD)
232 cm | |
Weight | 8179 to 8885 pounds |
Front tire | 11.00-16 |
Rear tire | 16.9R34 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
International Success published by Valmet |
Engine
Engine Detail — 268.5 ci / 4.4 L Diesel
Manufacturer | Valmet |
Configuration | turbo diesel, 4-cylinder |
Displacement | 268.5 ci
4.4 L |
Bore/Stroke | 4.252x4.724 inches
108 x 120 mm |
Power | 90 hp
67.1 kW |
Rated RPM | 2150 |
Transmission
Transmission — 16 forward and 8 reverse
Gears | 16 forward and 8 reverse |
Dimensions
Valmet 755 Tires | |
|---|---|
Ag front | 11.00-16 |
13.6R24 (4WD) | |
Ag rear | 16.9R34 |
Dimensions | |
|---|---|
Wheelbase | 94.1 inches
239 cm |
91.7 inches (4WD)
232 cm | |
Length | 174.2 inches
442 cm |
Height | 106.7 inches
271 cm |
Weight | 8,179 lbs
3709 kg |
8,885 lbs (4WD)
4030 kg | |
Recommended Implements & Sizing Guide
Engineering recommendations for Valmet 755 based on its 90 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 755.
Estimated Continuous Field Runtime: 7.9 hrs
Approximately 7.9 hours of continuous field operation at ~75% rated power on a full tank (37 gal / 140.1 L).
Estimated 75% Load Fuel Burn~4.7 gal/hr (17.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valmet 755 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 755.
Converted Equivalents:
Horsepower (HP)90 hp
Kilowatts (kW)67.1 kW
Metric Horsepower (PS / CV)91.2 PS
Direct Competitor Comparison
Compare Valmet 755 against same-era industry alternatives in the same horsepower class.
Current Model
Valmet
Valmet 755
Engine Power:Diesel (listed): 90 hp / 67.1 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 884
Engine Power:81
Production Years:1979 - 1984
Related models
Valmet 555
- Power:
- 72
- Production years:
- 1990 - 1992
Valmet 78
- Power:
- 72.2
- Production years:
- 1981 - 1987
Valmet 565
- Power:
- 75
- Production years:
- 1993 - 1997
Valmet 6000
- Power:
- 75
- Production years:
- 1993 - 1996
Valmet 605
- Power:
- 75
- Production years:
- 1982 - 1991