Valpadana 6550
The Valpadana 6550 is a tractor produced by Valpadana. It is equipped with a 133.6 ci 2.2 L engine. The listed engine power is Diesel (listed): 46 hp / 34.3 kW. Transmission: shuttle/creeper. Operating weight: 3,902 lbs 1769 kg.
Engine Power
Diesel (listed): 46 hp / 34.3 kW
Fuel & Capacities
13.21 gal
50.0 L
Transmission
shuttle/creeper
Operating Weight
3,902 lbs
1769 kg
Overview
 |
|---|
Production | |
|---|---|
Manufacturer | Valpadana |
Built in San Martino, Italy | |
Variants | |
|---|---|
ARM | articulated center |
ISM | equal-size tires, low |
ISR-REV | reversible platform |
VRM | oversize rear tires |
Valpadana 6550 Engine | |
|---|---|
2.2L 4-cyl diesel | |
Fuel tank | 13.21 gal
50.0 L |
Engine details ...  | |
Valpadana 6550 Transmission | |
|---|---|
16-speed | |
Transmission details ...  |
Valpadana 6550 Power | |
|---|---|
Engine | 46 hp
34.3 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Wet disc brakes |
Hydraulics | |
|---|---|
Valves | 3 optional |
Pump flow | 7.4 gpm
28.0 lpm |
Total flow | 12.4 gpm
46.9 lpm |
Steering flow | 5 gpm
18.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Rear lift | 3,748 lbs
1700 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/750/ground |
Dimensions & Tires | |
|---|---|
Wheelbase | 55 inches
139 cm |
59.6 inches (ARM)
151 cm | |
Weight | 3,902 lbs
1769 kg |
Front tire | 250/80-16 |
Rear tire | 320/70 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 133.6 ci / 2.2 L Diesel
Manufacturer | 4TNV88-KVA |
Fuel Type | Diesel |
Configuration | 4-cylinder 8-valve, liquid-cooled |
Displacement | 133.6 ci
2.2 L |
Power | 46 hp
34.3 kW |
Rated RPM | 2800 |
Torque | 106.2 lb-ft
144.0 Nm |
Torque RPM | 1600 |
Transmission
Transmission — shuttle/creeper
Transmission | shuttle/creeper |
Gears | 16 forward and reverse |
Dimensions
Valpadana 6550 Tires | |
|---|---|
Ag front | 250/80-16 |
Ag rear | 320/70 R20 |
Ag front | 320/65 R18 |
Ag rear | 320/65 R18 |
Dimensions | |
|---|---|
Wheelbase | 55 inches
139 cm |
59.6 inches (ARM)
151 cm | |
Length | 127.3 inches
323 cm |
132.8 inches (ARM)
337 cm | |
Width | 49.8 inches
126 cm |
40.2 inches (ARM)
102 cm | |
Height | 50.8 inches
129 cm |
Weight | 3,902 lbs
1769 kg |
Ground clearance | 11.4 inches
28 cm |
Photos
Valpadana 6550 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Valpadana 6550 based on its 46 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 6 ft (72 in)1.8 m | Medium Duty | Medium pasture clearing; rear slip-clutch recommended. |
Rotary TillerSeedbed Prep | 66 to 72 in165 - 180 cm | Medium Duty | Standard utility tiller; slip clutch protection required. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | Small Square Baler (14x18")小方捆打捆机 (36x46 cm) | Medium Duty | Classic 2-string baler for horse and small livestock hay. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valpadana 6550.
Estimated Continuous Field Runtime: 5.5 hrs
Approximately 5.5 hours of continuous field operation at ~75% rated power on a full tank (13.2 gal / 50 L).
Estimated 75% Load Fuel Burn~2.4 gal/hr (9.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valpadana 6550 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valpadana 6550.
Converted Equivalents:
Horsepower (HP)46 hp
Kilowatts (kW)34.3 kW
Metric Horsepower (PS / CV)46.6 PS
Direct Competitor Comparison
Compare Valpadana 6550 against same-era industry alternatives in the same horsepower class.
Current Model
Valpadana
Valpadana 6550
Engine Power:Diesel (listed): 46 hp / 34.3 kW
★ Baseline Reference
Related models
Valpadana 1640
- Power:
- 37.5
Valpadana 1545
- Power:
- 44
Valpadana 1645
- Power:
- 44
Valpadana 1550
- Power:
- 47.5
Valpadana 1650
- Power:
- 49.5