Valtra 6550Hi

The Valtra 6550Hi is a tractor produced by Valtra. It is equipped with a 268.4 ci 4.4 L engine. The listed engine power is Diesel (listed): 103.3 hp / 77.0 kW. Transmission: HiTech. Operating weight: 10274 lbs 4660 kg.

Engine Power
Diesel (listed): 103.3 hp / 77.0 kW
Fuel & Capacities
43.6 gal 165.0 L
Transmission
HiTech
Operating Weight
10274 lbs 4660 kg

Overview

No photo available
2004 - 2006 HiTech 6050 SeriesRow-Crop tractor HiTech 6050 Series Row-Crop tractor
Production
Manufacturer
Valtra (a part of AGCO)
Row-Crop tractor
Built in Suolahti, Finland
Valtra 6550Hi Engine
SisuDiesel 4.4L 4-cyl diesel
Fuel tank
43.6 gal 165.0 L
Engine details ...
Valtra 6550Hi Transmission
36-speed three-speed power shift
Transmission details ...
Valtra 6550Hi Power
Engine
103.3 hp 77.0 kW
Mechanical
Four-wheel drive
Power steering
Hydraulic wet disc brakes
Hydraulics
Pressure
2756 psi 190.0 bar
Pump flow
19.3 gpm 73.1 lpm
Tractor hitch
Rear Type
II
Rear lift
12346 lbs 5600 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/1000
540/540E OptOptional
Engine RPM
540@1874
1000@2000
540E@1539
Dimensions & Tires
Wheelbase
91.6 inches 232 cm
Weight
10274 lbs 4660 kg
Front tire
14.9R24
Rear tire
18.4R34
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
120
Battery volts
12
Battery AH
174
References
6550Hi references literature
HiTech 93-135 hp published in 2004, by Valtra

Engine

Engine Detail — 268.4 ci / 4.4 L Diesel

Manufacturer
SisuDiesel 44 ET
Configuration
turbocharged diesel, 4-cylinder, liquid-cooled
Displacement
268.4 ci 4.4 L
Bore/Stroke
4.25x4.72 inches 108 x 120 mm
Power
103.3 hp 77.0 kW
Rated RPM
2200
Torque
324.5 lb-ft 440.0 Nm
Torque RPM
1400
Starter
electric
Starter volts
12

Transmission

Transmission — HiTech

Transmission
HiTech
Type
three-speed power shift
Gears
36 forward and reverse
Clutch
wet disc
Four gears in three ranges with three-speed power shift and power shuttle.

Dimensions

Valtra 6550Hi Tires
Standard tires (ag)
Front: 14.9R24. Rear: 18.4R34
Dimensions
Wheelbase
91.6 inches 232 cm
Length
178.5 inches 453 cm
Width
89.8 inches 228 cm
Height (cab)
107.5 inches 273 cm
Height (exhaust)
107.9 inches 274 cm
Weight
10274 lbs 4660 kg
Clearance (front axle)
16.9 inches 42 cm
Clearance (rear axle)
17.1 inches 43 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Valtra 6550Hi based on its 103.3 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼Heavy DutyWide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机Heavy DutyHigh density baling; requires minimum 85 PTO HP.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Valtra 6550Hi.

Estimated Continuous Field Runtime: 8.1 hrs

Approximately 8.1 hours of continuous field operation at ~75% rated power on a full tank (43.6 gal / 165 L).

Estimated 75% Load Fuel Burn~5.4 gal/hr (20.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Valtra 6550Hi Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Valtra 6550Hi.

Converted Equivalents:

Horsepower (HP)103.3 hp
Kilowatts (kW)77 kW
Metric Horsepower (PS / CV)104.7 PS

Direct Competitor Comparison

Compare Valtra 6550Hi against same-era industry alternatives in the same horsepower class.

Current Model
Valtra

Valtra 6550Hi

Engine Power:Diesel (listed): 103.3 hp / 77.0 kW
★ Baseline Reference
DeereMarket Competitor

Deere 5093E

Engine Power:93
Production Years:2008 - 2012
FordMarket Competitor

Ford 7000

Engine Power:93
Production Years:1971 - 1975
CaseIHMarket Competitor

CaseIH JX95

Engine Power:93
Production Years:2002 - 2009
KubotaMarket Competitor

Kubota M5091N

Engine Power:93
Production Years:2018 - 2026