Valtra N154
The Valtra N154 is a tractor produced by Valtra. It is equipped with a 299.8 ci 4.9 L engine. The listed engine power is Diesel (listed): 152.9 hp / 114.0 kW. Transmission: Hi Tech. Operating weight: 13889 lbs 6300 kg.
Engine Power
Diesel (listed): 152.9 hp / 114.0 kW
Fuel & Capacities
62.1 gal
235.0 L
Transmission
Hi Tech
Operating Weight
13889 lbs
6300 kg
Overview
 | 2015 - 2020
N SeriesRow-Crop tractor
N Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | Valtra (a part of AGCO) |
Row-Crop tractor | |
Valtra N154 Engine | |
|---|---|
AGCO Power 4.9L 4-cyl diesel | |
Fuel tank | 62.1 gal
235.0 L |
83.2 galOptOptional
314.9 L | |
42.3 gal (steel tank)
160.1 L | |
Exhaust fluid (DEF) | 11.9 gal
45.0 L |
Engine details ...  | |
Valtra N154 Power | |
|---|---|
Engine | 152.9 hp
114.0 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Cab standard with air-conditioning. |
Hydraulics | |
|---|---|
Type | open center |
closed center OptOptional | |
Rear valves | 2 to 5 |
Pump flow | 19.3 gpm (open)
73.1 lpm |
23.8 gpm (open option)
90.1 lpm | |
30.4 gpm (closed)
115.1 lpm | |
42.3 gpm (closed option)
160.1 lpm | |
52.8 gpm (closed option)
199.8 lpm | |
Tractor hitch | |
|---|---|
Rear lift | 17534 lbs
7953 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Front PTO | independent OptOptional |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 104.9 inches
266 cm |
Weight | 13889 lbs
6300 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
References | |
|---|---|
 | |
N Series published in 2019, by Valtra |
Engine
Engine Detail — 299.8 ci / 4.9 L Diesel
Manufacturer | AGCO Power 49 AWF |
Configuration | turbocharged intercooled diesel, 4-cylinder, liquid-cooled |
Displacement | 299.8 ci
4.9 L |
Bore/Stroke | 4.25x5.28 inches
108 x 134 mm |
Emissions | Stage 4 |
Power | 152.9 hp
114.0 kW |
Maximum Power | 162.3 hp
121.0 kW |
Rated RPM | 2100 |
Torque | 449.9 lb-ft
610.1 Nm |
Torque RPM | 1500 |
Starter | electric |
Starter volts | 12 |
Valtra N154 Engine | |
|---|---|
 |
Transmission
Transmission options | |
|---|---|
30-speed five-speed power shift | |
continuously-variable transmission |
Transmission — Hi Tech
Transmission | Hi Tech |
Type | five-speed power shift |
Gears | 30 forward and reverse |
Transmission — infinite forward and reverse continuously-variable transmission
Type | continuously-variable transmission |
Gears | infinite forward and reverse |
Dimensions
Valtra N154 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 104.9 inches
266 cm |
Length | 183.3 inches
465 cm |
Height (cab) | 116.5 inches
295 cm |
Operating weight | 13889 lbs
6300 kg |
Max weight | 24251 lbs
11000 kg |
Ground clearance | 21.7 inches
55 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Valtra N154 based on its 152.9 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valtra N154.
Estimated Continuous Field Runtime: 7.8 hrs
Approximately 7.8 hours of continuous field operation at ~75% rated power on a full tank (62.1 gal / 235.1 L).
Estimated 75% Load Fuel Burn~8 gal/hr (30.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valtra N154 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valtra N154.
Converted Equivalents:
Horsepower (HP)152.9 hp
Kilowatts (kW)114 kW
Metric Horsepower (PS / CV)155 PS
Direct Competitor Comparison
Compare Valtra N154 against same-era industry alternatives in the same horsepower class.
Current Model
Valtra
Valtra N154
Engine Power:Diesel (listed): 152.9 hp / 114.0 kW
★ Baseline Reference
Related models
Valtra 6850Hi
- Power:
- 123.4
- Production years:
- 2004 - 2006
Valtra N124
- Power:
- 123.4
- Production years:
- 2015 - 2020
Valtra N111e
- Power:
- 124
- Production years:
- 2007 - 2011
Valtra G125
- Power:
- 125
- Production years:
- 2020 - 2026
Valtra A134
- Power:
- 127
- Production years:
- 2017 - 2020