Valtra N92
The Valtra N92 is a tractor produced by Valtra. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 101 hp / 75.3 kW. Transmission: 36 forward and reverse. Operating weight: 10,250 lbs 4649 kg.
Engine Power
Diesel (listed): 101 hp / 75.3 kW
Fuel & Capacities
58.1 gal
219.9 L
Transmission
36 forward and reverse
Operating Weight
10,250 lbs
4649 kg
Overview
 | 2007 - 2012
N SeriesUtility tractor
N Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Valtra (a part of AGCO) |
Utility tractor | |
Valtra N92 Engine | |
|---|---|
SisuDiesel 4.4L 4-cyl diesel | |
Fuel tank | 58.1 gal
219.9 L |
Engine details ...  | |
Valtra N92 Power | |
|---|---|
Engine | 101 hp
75.3 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Hydraulic disc brakes | |
Cab standard |
Hydraulics | |
|---|---|
Pressure | 2843 psi
196.0 bar |
Valves | up to 4 rear, 2 front |
Pump flow | 19.3 gpm
73.1 lpm |
Tractor hitch | |
|---|---|
Rear lift | 8,818 lbs
3999 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | ground/540/540E/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 99.8 inches
253 cm |
Weight | 10,250 lbs
4649 kg |
Front tire | 14.9R24 |
Rear tire | 18.4R34 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 268.5 ci / 4.4 L Diesel
Manufacturer | SisuDiesel 44DTA |
Configuration | intercooled turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 268.5 ci
4.4 L |
Bore/Stroke | 4.25x4.72 inches
108 x 120 mm |
Power | 101 hp
75.3 kW |
Rated RPM | 2270 |
Torque | 298.7 lb-ft
405.0 Nm |
Torque RPM | 1400 |
Transmission
Transmission options | |
|---|---|
24-speed | |
36-speed |
Transmission — 24 forward and reverse
Gears | 24 forward and reverse |
Transmission — 36 forward and reverse
Gears | 36 forward and reverse |
Dimensions
Valtra N92 Tires | |
|---|---|
Ag front | 14.9R24 |
Ag rear | 18.4R34 |
Dimensions | |
|---|---|
Wheelbase | 99.8 inches
253 cm |
Length | 169.9 inches
431 cm |
Width | 89.4 inches
227 cm |
Height | 108.7 inches
276 cm |
Weight | 10,250 lbs
4649 kg |
Ground clearance | 17.7 inches
44 cm |
Photos
Valtra N92 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Valtra N92 based on its 101 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Valtra N92.
Estimated Continuous Field Runtime: 11.1 hrs
Approximately 11.1 hours of continuous field operation at ~75% rated power on a full tank (58.1 gal / 219.9 L).
Estimated 75% Load Fuel Burn~5.3 gal/hr (19.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Valtra N92 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Valtra N92.
Converted Equivalents:
Horsepower (HP)101 hp
Kilowatts (kW)75.3 kW
Metric Horsepower (PS / CV)102.4 PS
Direct Competitor Comparison
Compare Valtra N92 against same-era industry alternatives in the same horsepower class.
Current Model
Valtra
Valtra N92
Engine Power:Diesel (listed): 101 hp / 75.3 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 966
Engine Power:91
Production Years:1971 - 1976
Related models
Valtra A84
- Power:
- 82
- Production years:
- 2017 - 2020
Valtra A82
- Power:
- 88
- Production years:
- 2008 - 2012
Valtra N82
- Power:
- 88
- Production years:
- 2007 - 2012
Valtra A94
- Power:
- 92
- Production years:
- 2017 - 2020
Valtra 6200
- Power:
- 92.5
- Production years:
- 2003 - 2007