Zetor Crystal 150 HD

The Zetor Crystal 150 HD is a tractor produced by Zetor. It is equipped with a 369.6 ci 6.1 L engine. The listed engine power is Diesel (gross): 144.2 hp / 107.5 kW. Transmission: 30 forward and reverse. Operating weight: 12699 lbs 5760 kg.

Engine Power

Diesel (gross): 144.2 hp / 107.5 kW

Fuel & Capacities

79.3 gal 300.2 L

Transmission

30 forward and reverse

Operating Weight

12699 lbs 5760 kg

Overview

	2018 - 2020 Crystal SeriesRow-Crop tractor Crystal Series Row-Crop tractor

Production
Manufacturer	Zetor
Row-Crop tractor
Built in Brno, Czech Republic

Zetor Crystal 150 HD Engine
Deutz 6.1L 6-cyl diesel
Fuel tank	79.3 gal 300.2 L
Exhaust fluid (DEF)	8.5 gal 32.2 L
Engine details ...

Zetor Crystal 150 HD Transmission
30-speed three-speed power shift
Transmission details ...

Zetor Crystal 150 HD Power
Engine (gross)	144.2 hp 107.5 kW
Engine (max)	150 hp 111.9 kW
PTO (claimed)	128 hp 95.4 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Wet disc brakes
Trailer brakes	pneumatic OptOptional
	hydraulic OptOptional
Cab standard with air-conditioning.

Hydraulics
Type	open center
Pump flow	22.5 gpm 85.2 lpm

Tractor hitch
Rear Type	III
Rear lift	17534 lbs 7953 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/540E/1000/1000E
Mid PTO	independent OptOptional
Mid PTO Type	1000

Dimensions & Tires
Wheelbase	112.2 inches 284 cm
Weight	12699 lbs 5760 kg
Front tire	480/65R28
Rear tire	600/65R38
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 369.6 ci / 6.1 L Diesel

Manufacturer	Deutz TCD 6.1 L6
Configuration	turbocharged diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	369.6 ci 6.1 L
Bore/Stroke	3.98x4.96 inches 101 x 126 mm
Emissions	Stage 4
Rated Power (gross)	144.2 hp 107.5 kW
Maximum Power (gross)	150 hp 111.9 kW
Fuel system	common rail direct injection
Cooling system	viscous fan
Rated RPM	2100
Starter	electric
Starter volts	12

Transmission

Transmission — 30 forward and reverse three-speed power shift

Type	three-speed power shift
Gears	30 forward and reverse
Five gears in two ranges with three-speed power shift and power shuttle.

Dimensions

Zetor Crystal 150 HD Tires
Standard tires (ag)	Front: 480/65R28. Rear: 600/65R38
Optional tires (ag)	Front: 540/65R28. Rear: 650/65R38

Dimensions
Wheelbase	112.2 inches 284 cm
Length	213 inches 541 cm
Width	100.4 inches 255 cm
Height (cab)	120 inches 304 cm
Weight	12699 lbs 5760 kg
Max weight	22046 lbs 10000 kg
Ground clearance	15.8 inches 40 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Zetor Crystal 150 HD based on its 144.2 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Zetor Crystal 150 HD.

Estimated Continuous Field Runtime: 10.6 hrs

Approximately 10.6 hours of continuous field operation at ~75% rated power on a full tank (79.3 gal / 300.2 L).

Estimated 75% Load Fuel Burn~7.5 gal/hr (28.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours