AGCO GT75

The AGCO GT75 is a tractor produced by Agco. It is equipped with a 244 ci 4.0 L engine. The listed engine power is Diesel (listed): 83 hp / 61.9 kW. Transmission: synchro-shuttle. Operating weight: 5511 to 6525 pounds.

Engine Power
Diesel (listed): 83 hp / 61.9 kW
Fuel & Capacities
23.7 gal 89.7 L
Transmission
synchro-shuttle
Operating Weight
5511 to 6525 pounds

Overview

AGCO GT75 tractor photo
2004 - 2007 GT SeriesUtility tractor GT Series Utility tractor
Production
Manufacturer
AGCO
Utility tractor
Built in Italy
AGCO GT75 Engine
SAME Deutz-Fahr 4.0L 4-cyl diesel
Fuel tank
23.7 gal 89.7 L
Engine details ...
AGCO GT75 Transmission
16-speed
Transmission details ...
AGCO GT75 Power
Engine
83 hp 61.9 kW
PTO (claimed)
74 hp 55.2 kW
PTO (tested)
76.31 hp 56.9 kW
Performance test details ...
Mechanical
Two- or four-wheel drive
Final drives
planetary
Differential lock
mechanical rear
Power steering
Wet disc brakes
Two-post folding ROPS. Cab optional with air-conditioning.
Hydraulics
Type
open center
Pump flow
14 gpm 53.0 lpm
Total flow
22.7 gpm 85.9 lpm
Tractor hitch
Rear Type
II
Rear lift (at 24"/610mm)
3520 lbs 1596 kg
Rear Arms
fixed
telescopic OptOptional
Power Take-off (PTO)
Rear PTO
independent
Clutch
electro-hydraulic
Rear PTO Type
540/1000 (1.375)
Engine RPM
540@1967
1000@2043
Dimensions & Tires
2WD Wheelbase
88 inches 223 cm
4WD Wheelbase
86 inches 218 cm
Weight
5511 to 6525 pounds
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Battery volts
12
References
GT75 references literature
GT Series - Rugged Comfort published in 2003, by AGCO
GT Series published in 2003, by AGCO
GT Series published in 2004, by AGCO

Engine

Engine Detail — 244 ci / 4.0 L Diesel

Manufacturer
SAME Deutz-Fahr
Configuration
turbocharged diesel, 4-cylinder, liquid-cooled
Displacement
244 ci 4.0 L
Bore/Stroke
4.134x4.547 inches 105 x 115 mm
Power
83 hp 61.9 kW
Air cleaner
dry element
Compression
16.0:1
Rated RPM
2200
Torque
237 lb-ft 321.4 Nm
Torque RPM
1299
Starter volts
12

Transmission

Transmission — synchro-shuttle

Transmission
synchro-shuttle
Gears
16 forward and 8 reverse
Clutch
dry disc

Dimensions

AGCO GT75 Tires
Dimensions
2WD Wheelbase
88 inches 223 cm
4WD Wheelbase
86 inches 218 cm
Length
151.6 inches 385 cm
Width
76.7 inches 194 cm
Height
106 inches 269 cm
2WD Front tread
54.6 to 66.4 inches 138 to 168 cm
4WD Front tread
57.5 to 69.1 inches 146 to 175 cm
Rear tread
55.1 to 74.8 inches 139 to 189 cm
AGCO GT75 Weight
2WD ROPS
5511 lbs 2499 kg
4WD ROPS
5996 lbs 2719 kg
2WD Cab
6040 lbs 2739 kg
4WD Cab
6525 lbs 2959 kg

Tests

Nebraska Tractor Test 1850
Diesel 16-speed 4WD May 20 - 26, 2005 Link: Nebraska Tractor Test 1850 file
PTO performance
Power at rated engine speed
76.31 hp 56.9 kW
Fuel use
4.9 gal/hour 18.5 l/hour
Power at rated PTO speed
76.81 hp 57.3 kW
Fuel use
4.7 gal/hour 17.8 l/hour

Photos

AGCO GT75

AGCO GT75

Recommended Implements & Sizing Guide

Engineering recommendations for Agco GT75 based on its 83 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
7 to 8 ft (84-96 in)2.1 - 2.4 mHeavy DutyHeavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep
78 to 84 in200 - 215 cmHeavy DutyHeavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机Heavy DutySilage and dry hay; 540 RPM PTO with slip-clutch.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Agco GT75.

Estimated Continuous Field Runtime: 5.5 hrs

Approximately 5.5 hours of continuous field operation at ~75% rated power on a full tank (23.7 gal / 89.7 L).

Estimated 75% Load Fuel Burn~4.3 gal/hr (16.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Agco GT75 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco GT75.

Converted Equivalents:

Horsepower (HP)83 hp
Kilowatts (kW)61.9 kW
Metric Horsepower (PS / CV)84.2 PS

Direct Competitor Comparison

Compare AGCO GT75 against same-era industry alternatives in the same horsepower class.

Current Model
Agco

AGCO GT75

Engine Power:Diesel (listed): 83 hp / 61.9 kW
★ Baseline Reference
International HarvesterMarket Competitor

International Harvester 784

Engine Power:74.9
Production Years:1977 - 1984
KubotaMarket Competitor

Kubota SMZ76

Engine Power:74.9
Production Years:2006 - 2010
New HollandMarket Competitor

New Holland TT75

Engine Power:74.9
Production Years:2002 - 2008
Massey FergusonMarket Competitor

Massey Ferguson 1075

Engine Power:75
Production Years:1970 - 1980
  • AGCO GT65

    Power:
    71
    Production years:
    2004 - 2007
  • AGCO LT70

    Power:
    77.8
    Production years:
    2002 - 2004
  • AGCO LT85

    Power:
    94.4
    Production years:
    2002 - 2004
  • AGCO DT205B

    Power:
    240
    Production years:
    2009 - 2010
  • AGCO DT225B

    Power:
    265
    Production years:
    2009 - 2010