AGCO LT75A
The AGCO LT75A is a tractor produced by Agco. It is equipped with a 268.3 ci 4.4 L engine. The listed engine power is Diesel (listed): 100 hp / 74.6 kW. Transmission: powershift. Operating weight: 8,820 lbs (2WD platform) 4000 kg.
Engine Power
Diesel (listed): 100 hp / 74.6 kW
Fuel & Capacities
34.3 gal
129.8 L
Transmission
powershift
Operating Weight
8,820 lbs (2WD platform)
4000 kg
Overview
 | 2006 - 2008
LT-A SeriesUtility tractor
LT-A Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | AGCO |
Utility tractor | |
Built in Beauvais, France | |
AGCO LT75A Engine | |
|---|---|
Sisu 4.4L 4-cyl diesel | |
Fuel tank | 34.3 gal
129.8 L |
49.3 gal (with optional tank)
186.6 L | |
Engine details ...  | |
AGCO LT75A Transmission | |
|---|---|
16-speed | |
Transmission details ...  |
AGCO LT75A Power | |
|---|---|
Engine | 100 hp
74.6 kW |
PTO (claimed) | 75 hp
55.9 kW |
PTO (tested) | 87.1 hp
65.0 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Final drives | inboard planetary |
Power steering | |
Wet disc brakes | |
Two-post folding ROPS. Cab optional. | |
Hydraulics | |
|---|---|
Type | open center |
closed optional | |
Valves | 2 to 4 |
Total flow | 26 gpm
98.4 lpm |
29 gpm (optional)
109.8 lpm | |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at 24"/610mm) | 7,817 lbs
3545 kg |
9,189 lbs (optional)
4168 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 107.5 inches
273 cm |
Weight | 8820 to 9940 pounds |
Front tire | 14.9R24 |
Rear tire | 18.4R34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
References | |
|---|---|
 | |
LT Series published in 2004, by AGCO |
Engine
Engine Detail — 268.3 ci / 4.4 L Diesel
Manufacturer | Sisu |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 268.3 ci
4.4 L |
Bore/Stroke | 4.252x4.724 inches
108 x 120 mm |
Power | 100 hp
74.6 kW |
Air cleaner | paper element with water separator |
Compression | 18.5:1 |
Rated RPM | 2200 |
Starter volts | 12 |
Transmission
Transmission — powershift
Transmission | powershift |
Gears | 16 forward and reverse |
Dimensions
AGCO LT75A Tires | |
|---|---|
Ag front | 14.9R24 |
Ag rear | 18.4R34 |
Dimensions | |
|---|---|
Wheelbase | 107.5 inches
273 cm |
Length | 165.5 inches
420 cm |
Height (Folded ROPS) | 62.5 inches
158 cm |
Height (cab) | 110 inches
279 cm |
Weight | 8,820 lbs (2WD platform)
4000 kg |
9,940 lbs (4WD cab)
4508 kg | |
Tests
Nebraska Tractor Test 1883 | |
|---|---|
Diesel
September 2006
Link: Nebraska Tractor Test 1883 file | |
PTO performance | |
Max power | 87.1 hp
65.0 kW |
Fuel use | 5.3 gal/hour
20.1 l/hour |
Power at rated engine speed | 78.4 hp
58.5 kW |
Fuel use | 5.1 gal/hour
19.3 l/hour |
Photos
AGCO LT75A tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Agco LT75A based on its 100 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Agco LT75A.
Estimated Continuous Field Runtime: 6.6 hrs
Approximately 6.6 hours of continuous field operation at ~75% rated power on a full tank (34.3 gal / 129.8 L).
Estimated 75% Load Fuel Burn~5.2 gal/hr (19.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Agco LT75A Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco LT75A.
Converted Equivalents:
Horsepower (HP)100 hp
Kilowatts (kW)74.6 kW
Metric Horsepower (PS / CV)101.4 PS
Direct Competitor Comparison
Compare AGCO LT75A against same-era industry alternatives in the same horsepower class.
Current Model
Agco
AGCO LT75A
Engine Power:Diesel (listed): 100 hp / 74.6 kW
★ Baseline Reference
Related models
AGCO GT75
- Power:
- 83
- Production years:
- 2004 - 2007
AGCO LT85
- Power:
- 94.4
- Production years:
- 2002 - 2004
AGCO LT75
- Power:
- 100
- Production years:
- 2004 - 2006
AGCO LT85A
- Power:
- 105
- Production years:
- 2008 - 2010
AGCO RT95
- Power:
- 105.6
- Production years:
- 2002 - 2004