AGCO ST30

The AGCO ST30 is a tractor produced by Agco. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (net): 29.1 hp / 21.7 kW; Diesel (gross): 30.3 hp / 22.6 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 753 lbs 341 kg.

Overview

	2001 - 2004 ST SeriesCompact Utility tractorIseki built ST Series Compact Utility tractor Iseki built

Production
Distributor	AGCO
Manufacturer	Iseki
Compact Utility tractor
Built in Matsuyama, Japan

Variants
1235	similar Massey Ferguson model

AGCO ST30 Engine
Iseki 1.5L 3-cyl diesel
Engine details ...

AGCO ST30 Power
Engine (gross)	30.3 hp 22.6 kW
Engine (net)	29.1 hp 21.7 kW
Gear PTO (claimed)	24.5 hp 18.3 kW
Hydro PTO (claimed)	22.3 hp 16.6 kW

Mechanical
Four-wheel drive
Final drives	spur gear
Differential lock	mechanical rear
Power steering
Wet disc brakes
Two-post folding ROPS.

Capacity
Fuel	6.1 gal 23.1 L
Hydraulic system	3.2 gal 12.1 L

Hydraulics
Type	open center
Capacity	3.2 gal 12.1 L
Pressure	2130 psi 146.9 bar
Pump flow	6.0 gpm 22.7 lpm
Total flow	8.5 gpm 32.2 lpm
Steering flow	2.5 gpm 9.5 lpm
Steering press.	1707 psi 117.7 bar

Tractor hitch
Rear Type	I
Control	position control
	draft control OptOptional
Rear lift (at ends)	1984 lbs 899 kg
Rear lift (at 24"/610mm)	1201 lbs 544 kg
Rear Arms	fixed link ends with turn-buckle stabilizers

Power Take-off (PTO)
Rear PTO	live (gear)
	independent (hydro)
Rear PTO Type	540 (1.375)
Engine RPM	540@2327
Mid PTO	live OptOptional
Clutch	dry disc
Mid PTO Type	SAE 15 1.0
Engine RPM	2000@2482

Dimensions & Tires
Wheelbase	65.6 inches 166 cm
Weight	2594 lbs 1176 kg
Front tire	6.00-14
Rear tire	12.4-16
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	40
Battery CCA	582
Battery volts	12

References
Compact Tractors published in 2000, by AGCO
ST Series published in 2001, by AGCO
ST Series Compact Tractors published in 2002, by AGCO
ST Series Compact Tractors published in 2001, by AGCO*
*Publication contains known errors.

Engine

Engine Detail — 91.4 ci / 1.5 L Diesel

Manufacturer	Iseki E3CD
Fuel Type	Diesel
Configuration	3-cylinder, liquid-cooled inline
Displacement	91.4 ci 1.5 L
Bore/Stroke	3.43x3.31 inches 87 x 84 mm
Power (net)	29.1 hp 21.7 kW
Power (gross)	30.3 hp 22.6 kW
Fuel system	indirect injection
Air cleaner	dry
Pre-heating	glow plugs
Compression	21.8
Rated RPM	2500
Idle RPM	950-2750
Torque	71.6 lb-ft 97.1 Nm
Torque RPM	1800
Starter	electric
Starter volts	12
Oil capacity	5 qts 4.7 L
Coolant capacity	7.5 qts 7.1 L

Transmission

Transmission options
9-speed gear
hydrostatic

Transmission — 9 forward and 3 reverse gear

Type	gear
Gears	9 forward and 3 reverse
Clutch	225mm mechanical dry disc

Transmission — infinite forward and reverse (3-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (3-range)

Dimensions

AGCO ST30 Tires
Standard tires (ag)	Front: 6.00-14. Rear: 12.4-16
Lawn/turf front	24x8.50-12
Lawn/turf rear	315/80D-16
Lawn/turf front	27x8.50-15
Lawn/turf rear	13.6-16
Industrial front	25x8.50-14
Industrial rear	12.5/80-18

Dimensions
Wheelbase	65.6 inches 166 cm
Length	116.5 inches 295 cm
Width	55.5 inches 140 cm
Height (ROPS)	79.3 inches 201 cm
Shipping weight	2594 lbs 1176 kg
Max weight	4186 lbs 1898 kg
Flange rear axle
Front tread	37.8 inches 96 cm
Rear tread	43.1 inches 109 cm

Attachments

Attachment overview
60" mid-mount mower deck
72" mid-mount mower deck
Front-end loader
Backhoe

AGCO SH16 Backhoe
Backhoe type	AGCO SH16 Backhoe
Weight	753 lbs 341 kg
Transport height	63.8 inches 162 cm
Bucket width	10 inches 25 cm
	12 inches 30 cm
	16 inches 40 cm
2-Foot flat digging depth	78.9 inches 200 cm
Reach from pivot	100.3 inches 254 cm
Bucket Rotation	165°
Swing Arc	180°

Photos

AGCO ST30 with SL44 front-end loader.