AGCO ST32
The AGCO ST32 is a tractor produced by Agco. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (gross): 33 hp / 24.6 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 2642 lbs 1198 kg.
Engine Power
Diesel (gross): 33 hp / 24.6 kW
Fuel & Capacities
6.1 gal
23.1 L
Transmission
infinite forward and reverse (3-range)
Operating Weight
2642 lbs
1198 kg
Overview
 | 2001 - 2004
ST SeriesCompact Utility tractorIseki built
ST Series
Compact Utility tractor
Iseki built |
|---|
Production | |
|---|---|
Distributor | AGCO |
Manufacturer | Iseki |
Compact Utility tractor | |
AGCO ST32 Engine | |
|---|---|
Iseki 1.5L 3-cyl diesel | |
Fuel tank | 6.1 gal
23.1 L |
Engine details ...  | |
AGCO ST32 Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
AGCO ST32 Power | |
|---|---|
Engine (gross) | 33 hp
24.6 kW |
PTO (claimed) | 25.9 hp
19.3 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | spur gear |
Differential lock | mechanical rear |
Power steering | |
Wet disc brakes | |
Two-post folding ROPS. | |
Hydraulics | |
|---|---|
Type | open center |
Pressure | 2134 psi
147.1 bar |
Pump flow | 7.7 gpm
29.1 lpm |
Total flow | 10.4 gpm
39.4 lpm |
Steering flow | 2.7 gpm
10.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position control |
draft control OptOptional | |
Rear lift (at ends) | 2425 lbs
1099 kg |
Rear Arms | fixed link ends with telescopic stabilizer |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic |
Rear PTO Type | 540 (1.375) |
Mid PTO | independent |
Mid PTO Type | SAE 15 1.0 |
Engine RPM | 2000@2600 |
Dimensions & Tires | |
|---|---|
Wheelbase | 65.6 inches
166 cm |
Weight | 2642 lbs
1198 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
ST Series published in 2004, by AGCO |
Engine
Engine Detail — 91.4 ci / 1.5 L Diesel
Manufacturer | Iseki E3CD |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 91.4 ci
1.5 L |
Bore/Stroke | 3.43x3.31 inches
87 x 84 mm |
Power (gross) | 33 hp
24.6 kW |
Fuel system | indirect injection |
Air cleaner | dry |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — infinite forward and reverse (3-range) hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse (3-range) |
 | |
Dimensions
AGCO ST32 Tires | |
|---|---|
Industrial rear | 12.5/80-18 |
Dimensions | |
|---|---|
Wheelbase | 65.6 inches
166 cm |
Length | 116.5 inches
295 cm |
Width | 51 inches
129 cm |
Height (ROPS) | 79.3 inches
201 cm |
Height (Folded ROPS) | 68.3 inches
173 cm |
Shipping weight | 2642 lbs
1198 kg |
Front tread | 42.5 inches
107 cm |
Rear tread | 37.8 inches
96 cm |
Photos
AGCO ST32 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Agco ST32 based on its 33 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Agco ST32.
Estimated Continuous Field Runtime: 3.6 hrs
Approximately 3.6 hours of continuous field operation at ~75% rated power on a full tank (6.1 gal / 23.1 L).
Estimated 75% Load Fuel Burn~1.7 gal/hr (6.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Agco ST32 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco ST32.
Converted Equivalents:
Horsepower (HP)33 hp
Kilowatts (kW)24.6 kW
Metric Horsepower (PS / CV)33.5 PS
Direct Competitor Comparison
Compare AGCO ST32 against same-era industry alternatives in the same horsepower class.
Current Model
Agco
AGCO ST32
Engine Power:Diesel (gross): 33 hp / 24.6 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 274
Engine Power:30
Production Years:1979 - 1983
Related models
AGCO ST28A
- Power:
- 28.4
- Production years:
- 2005 - 2008
AGCO ST30x
- Power:
- 28.4
- Production years:
- 2001 - 2001
AGCO ST30
- Power:
- 30.3
- Production years:
- 2001 - 2004
AGCO ST33A
- Power:
- 33
- Production years:
- 2005 - 2008
AGCO ST34A
- Power:
- 33
- Production years:
- 2005 - 2008