AGCO Allis 9150
The AGCO Allis 9150 is a tractor produced by Agco Allis. It is equipped with a 374 ci 6.1 L engine. The listed engine power is 151.07 hp 112.7 kW. Transmission: 18 forward and 6 reverse. Operating weight: 12500 lbs 5670 kg.
Engine Power
151.07 hp
112.7 kW
Fuel & Capacities
90 gal
340.7 L
Transmission
18 forward and 6 reverse
Operating Weight
12500 lbs
5670 kg
Overview
 | 1991 - 1992
9100 SeriesRow-Crop tractorWhite built
9100 Series
Row-Crop tractor
White built |
|---|
Production | |
|---|---|
Distributor | AGCO Allis |
Manufacturer | White |
Row-Crop tractor | |
Built in Coldwater, Ohio, USA | |
Original price was $64,000 in 1992 | |
AGCO Allis 9150 Engine | |
|---|---|
Deutz 6.1L 6-cyl diesel | |
Fuel tank | 90 gal
340.7 L |
Engine details ...  | |
AGCO Allis 9150 Transmission | |
|---|---|
18-speed three-speed power shift | |
Transmission details ...  |
AGCO Allis 9150 Power | |
|---|---|
Drawbar (claimed) | 135 hp
100.7 kW |
PTO (claimed) | 150 hp
111.9 kW |
Drawbar (tested) | 132.71 hp
99.0 kW |
PTO (tested) | 151.07 hp
112.7 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Steering | hydrostatic power |
Hydraulics | |
|---|---|
Type | closed center |
Valves | 3 |
Pump flow | 24 gpm
90.8 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Rear lift | 7212 lbs
3271 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 120 inches
304 cm |
Weight | 12500 lbs
5670 kg |
Front tire | 11.00-16 |
Rear tire | 18.4R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 374 ci / 6.1 L Diesel
Manufacturer | Deutz |
Fuel Type | Diesel |
Configuration | 6-cylinder, air-cooled |
Displacement | 374 ci
6.1 L |
Bore/Stroke | 4.016x4.921 inches
102 x 125 mm |
Rated RPM | 2400 |
Starter volts | 12 |
Transmission
Transmission — 18 forward and 6 reverse three-speed power shift
Type | three-speed power shift |
Gears | 18 forward and 6 reverse |
Six forward gears, each with a three-speed power shift. | |
Dimensions
AGCO Allis 9150 Tires | |
|---|---|
Ag front | 11.00-16 |
Ag rear | 18.4R38 |
Dimensions | |
|---|---|
Wheelbase | 120 inches
304 cm |
Weight | 12500 lbs
5670 kg |
Tests
Nebraska Tractor Test 1633 | |
|---|---|
Diesel 18-speed 2WD
November 2 - 14, 1989
Link: Nebraska Tractor Test 1633 file | |
PTO performance | |
Power at rated engine speed | 151.07 hp
112.7 kW |
Fuel use | 9.3 gal/hour
35.2 l/hour |
Power at rated PTO speed | 150.22 hp
112.0 kW |
Fuel use | 9.1 gal/hour
34.4 l/hour |
Drawbar performance | |
Max power | 132.71 hp
99.0 kW |
Fuel use | 9.1 gal/hour
34.4 l/hour |
Gear 3D used for power test. | |
Max pull | 119.68 lbs
54 kg |
Gear 1O used for pull test. | |
Photos
AGCO Allis 9150 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Agco Allis 9150 based on its 151.07 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Agco Allis 9150.
Estimated Continuous Field Runtime: 11.5 hrs
Approximately 11.5 hours of continuous field operation at ~75% rated power on a full tank (90 gal / 340.7 L).
Estimated 75% Load Fuel Burn~7.9 gal/hr (29.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Agco Allis 9150 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco Allis 9150.
Converted Equivalents:
Horsepower (HP)151.1 hp
Kilowatts (kW)112.7 kW
Metric Horsepower (PS / CV)153.2 PS
Direct Competitor Comparison
Compare AGCO Allis 9150 against same-era industry alternatives in the same horsepower class.
Current Model
Agco Allis
AGCO Allis 9150
Engine Power:151.07 hp
112.7 kW
★ Baseline Reference
Related models
AGCO Allis 7630
- Power:
- 122.2
- Production years:
- 1991 - 1992
AGCO Allis 8785
- Power:
- 122.2
- Production years:
- 1998 - 1999
AGCO Allis 8630
- Power:
- 132.2
- Production years:
- 1991 - 1997
AGCO Allis 9735
- Power:
- 138.9
- Production years:
- 1998 - 2001
AGCO Allis 7650
- Power:
- 146.7
- Production years:
- 1991 - 1994