AGCO Allis 9735
The AGCO Allis 9735 is a tractor produced by Agco Allis. It is equipped with a 402 ci 6.6 L engine. The listed engine power is 125.58 hp 93.6 kW. Transmission: Quadrashift. Operating weight: 15000 to 16180 pounds.
Engine Power
125.58 hp
93.6 kW
Fuel & Capacities
100 gal
378.5 L
Transmission
Quadrashift
Operating Weight
15000 to 16180 pounds
Overview
 | 1998 - 2001
9700 SeriesRow-Crop tractor
9700 Series
Row-Crop tractor |
|---|
Production | |
|---|---|
Manufacturer | AGCO Allis |
Row-Crop tractor | |
Original price | $67,703 (1998 QS 2WD ) |
$72,916 (1998 PS 2WD ) | |
$77,666 (1998 QS 4WD ) | |
$82,793 (1998 PS 4WD ) | |
Variants | |
|---|---|
8310 | similar White model |
AGCO Allis 9735 Engine | |
|---|---|
SisuDiesel 6.6L 6-cyl diesel | |
Fuel tank | 100 gal
378.5 L |
Engine details ...  | |
AGCO Allis 9735 Power | |
|---|---|
PTO (claimed) | 125 hp
93.2 kW |
Drawbar (tested) | 114.13 hp
85.1 kW |
PTO (tested) | 137.32 hp
102.4 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard. |
Hydraulics | |
|---|---|
Type | closed center |
Pressure | 2900 psi
200.0 bar |
Valves | 2 |
Pump flow | 27 gpm
102.2 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at 24"/610mm) | 10400 lbs
4717 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Engine RPM | 1000@2100 |
Dimensions & Tires | |
|---|---|
Wheelbase | 117.5 inches
298 cm |
Weight | 15000 to 16180 pounds |
Front tire | 11.00-16 |
Rear tire | 18.4R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
References | |
|---|---|
 | |
New 8700/9700 Series Tractors published in 1997, by AGCO | |
9735 - 9745 published in 1997, by AGCO |
Engine
Engine Detail — 402 ci / 6.6 L Diesel
Manufacturer | SisuDiesel 66.6T |
Configuration | turbocharged diesel, 6-cylinder, liquid-cooled |
Displacement | 402 ci
6.6 L |
Bore/Stroke | 4.25x4.72 inches
108 x 120 mm |
Air cleaner | paper elements |
Compression | 16.5:1 |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
18-speed full power shift | |
32-speed four-speed power shift |
Transmission — 18 forward and 6 reverse full power shift
Manufacturer | Funk-Deere |
Type | full power shift |
Gears | 18 forward and 6 reverse |
Clutch | hydraulic wet disc |
 | |
Transmission — Quadrashift
Transmission | Quadrashift |
Type | four-speed power shift |
Gears | 32 forward and reverse |
Clutch | wet disc |
Four power shift gears in six ranges. | |
Dimensions
AGCO Allis 9735 Tires | |
|---|---|
Ag front | 11.00-16 |
Ag rear | 18.4R38 |
Dimensions | |
|---|---|
Wheelbase | 117.5 inches
298 cm |
Length | 202 inches
513 cm |
Width | 98 inches*Minimum width.
248 cm |
Height (cab) | 120 inches
304 cm |
Bar rear axle | 3.75 by 98 inches
95 by 2489 mm |
Bar rear axle | 3.75 by 118 inches
95 by 2997 mm |
AGCO Allis 9735 Weight | |
|---|---|
2WD Shipping | 15000 lbs
6804 kg |
4WD Shipping | 16000 lbs
7257 kg |
Operating | 16180 lbs
7339 kg |
Ballasted | 18090 lbs
8205 kg |
Tests
OCED Tractor Test 1758 | |
|---|---|
Diesel 32-speed 4WD
October 2 - November 19, 1998
Link: OCED Tractor Test 1758 file | |
PTO performance | |
Max power | 137.32 hp
102.4 kW |
Fuel use | 7.8 gal/hour
29.5 l/hour |
Power at rated engine speed | 125.58 hp
93.6 kW |
Fuel use | 8.1 gal/hour
30.7 l/hour |
Power at rated PTO speed | 132.17 hp
98.6 kW |
Fuel use | 8.1 gal/hour
30.7 l/hour |
Drawbar performance | |
Max power | 114.13 hp
85.1 kW |
Fuel use | 8.2 gal/hour
31.0 l/hour |
Gear 1HB used for power test. | |
Max pull | 14,836 lbs
6729 kg |
Gear 2LB used for pull test. | |
Photos
AGCO Allis 9735 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Agco Allis 9735 based on its 125.58 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Agco Allis 9735.
Estimated Continuous Field Runtime: 15.3 hrs
Approximately 15.3 hours of continuous field operation at ~75% rated power on a full tank (100 gal / 378.5 L).
Estimated 75% Load Fuel Burn~6.5 gal/hr (24.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Agco Allis 9735 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco Allis 9735.
Converted Equivalents:
Horsepower (HP)125.6 hp
Kilowatts (kW)93.6 kW
Metric Horsepower (PS / CV)127.3 PS
Direct Competitor Comparison
Compare AGCO Allis 9735 against same-era industry alternatives in the same horsepower class.
Current Model
Agco Allis
AGCO Allis 9735
Engine Power:125.58 hp
93.6 kW
★ Baseline Reference
Related models
AGCO Allis 8775
- Power:
- 105.6
- Production years:
- 1998 - 1999
AGCO Allis 8610
- Power:
- 114.4
- Production years:
- 1991 - 1997
AGCO Allis 7630
- Power:
- 122.2
- Production years:
- 1991 - 1992
AGCO Allis 8785
- Power:
- 122.2
- Production years:
- 1998 - 1999
AGCO Allis 8630
- Power:
- 132.2
- Production years:
- 1991 - 1997