AGCO 1827H

The AGCO 1827H is a tractor produced by Agco Lawn Tractors. It is equipped with a 724 cc 44.2 ci engine. The listed engine power is Gasoline (gross): 27 hp / 20.1 kW. Transmission: Tuff Torq K664. Drive type: 4x2 2WD. Operating weight: 666 lbs 302 kg.

Engine Power
Gasoline (gross): 27 hp / 20.1 kW
Drive & Traction
4x2 2WD
Fuel & Capacities
4 gal 15.1 L
Transmission
Tuff Torq K664
Operating Weight
666 lbs 302 kg

Overview

AGCO 1827H tractor photo
2007 - 2012 1800 SeriesGarden tractorSimplicity built 1800 Series Garden tractor Simplicity built
Production
Distributor
AGCO
Manufacturer
Simplicity
Garden tractor
Built in McDonough, Georgia, USA
Variants
Prestige 27
similar Simplicity model
2827H
similar Massey Ferguson model
AGCO 1827H Engine
27HP Kohler 724cc 2-cyl gasoline
Fuel tank
4 gal 15.1 L
Engine details ...
AGCO 1827H Transmission
hydrostatic
Transmission details ...
Mechanical
Drive
4x2 2WD
4x4 HFWD 4WD
Differential lock
mechanical rear (2WD)
Power steering
Disc brakes
Open operator station.
Tractor hitch
Type
sleeve hitch OptOptional
Power Take-off (PTO)
Mid PTO
independent
Clutch
electric
Dimensions & Tires
Weight
666 lbs 302 kg
Front tire
16x6.5-8
Rear tire
24x12-12
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Charging amps
15
Battery volts
12
References
1827H references literature
Lawn and Garden Equipment published in 2009, by AGCO
Operator's Manual Prestige / 1800 / 2800 / 500 Series, Conquest / 1700 / 2700 / 400 Series (1735106) published in 2010

Engine

Engine Detail — 724 cc / 44.2 ci Gasoline

Manufacturer
Kohler CV740S
Fuel Type
Gasoline
Configuration
2-cylinder, air-cooled vertical-shaft V-Twin
Displacement
724 cc 44.2 ci
Bore/Stroke
3.27x2.60 inches 83 x 66 mm
Power (gross)
27 hp 20.1 kW
Starter
electric
Starter volts
12

Transmission

Transmission — Tuff Torq K71

Transmission
Tuff Torq K71
Type
belt-driven hydrostatic
Gears
infinite forward and reverse
The K71 was used on tractors with two-wheel drive.
1827H K71 belt-driven hydrostatic speeds

Transmission — Tuff Torq K664

Transmission
Tuff Torq K664
Type
belt-driven hydrostatic
Gears
infinite forward and reverse
The K664 was used on tractors with four-wheel drive.

Dimensions

AGCO 1827H Tires
Lawn/turf front
16x6.5-8
Lawn/turf rear
24x12-12 (2WD)
23x10.5-12 (4WD)
Dimensions
Length
75 inches 190 cm
Width
41 inches 104 cm
Height
50 inches 127 cm
Weight
666 lbs 302 kg
Front axle
Cast-iron

Attachments

Attachment overview
44" mid-mount mower deck
50" mid-mount mower deck
54" mid-mount mower deck
Snowblower
Blade
Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments.

Photos

AGCO 1827H tractor photo

AGCO 1827H tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Agco Lawn Tractors AGCO 1827H based on its 27 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
5 ft (60 in)1.5 mMedium DutyPasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep
54 to 60 in135 - 150 cmMedium DutyThorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Agco Lawn Tractors AGCO 1827H.

Estimated Continuous Field Runtime: 2.8 hrs

Approximately 2.8 hours of continuous field operation at ~75% rated power on a full tank (4 gal / 15.1 L).

Estimated 75% Load Fuel Burn~1.4 gal/hr (5.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Agco Lawn Tractors AGCO 1827H Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Agco Lawn Tractors AGCO 1827H.

Converted Equivalents:

Horsepower (HP)27 hp
Kilowatts (kW)20.1 kW
Metric Horsepower (PS / CV)27.4 PS

Direct Competitor Comparison

Compare AGCO 1827H against same-era industry alternatives in the same horsepower class.

Current Model
Agco Lawn Tractors

AGCO 1827H

Engine Power:Gasoline (gross): 27 hp / 20.1 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1225

Engine Power:24.3
Production Years:1999 - 2002
DeereMarket Competitor

Deere 3025D

Engine Power:24.4
Production Years:2019 - 2026
New HollandMarket Competitor

New Holland Workmaster 25

Engine Power:24.4
Production Years:2018 - 2026
AGCOMarket Competitor

AGCO ST25

Engine Power:24.3
Production Years:2001 - 2004