Allis Chalmers D10
The Allis Chalmers D10 is a tractor produced by Allis Chalmers. It is equipped with a 149 ci 2.4 L engine. The rated power output is 31 hp 23.1 kW. Transmission: 4 forward and 1 reverse. Operating weight: 2,700 lbs 1224 kg.
Engine Power
31 hp
23.1 kW
Fuel & Capacities
Gasoline
Transmission
4 forward and 1 reverse
Operating Weight
2,700 lbs
1224 kg
Allis Chalmers D10 Serial Number & Year Decoder
Find the exact manufacture year of your tractor by checking your chassis serial number below.
Where to Find the Serial NumberThe serial number plate is commonly located on the front frame, tractor transmission housing (right side), or instrument panel badge.
Overview
 | 1959 - 1967
D SeriesRow-Crop tractor |
|---|---|
1959 - 1967 | |
D Series | |
Row-Crop tractor | |
Production | |
|---|---|
Manufacturer | Allis Chalmers |
Row-Crop tractor | |
Built in West Allis, Wisconsin, USA | |
Total built | 9,100 |
Original price | $3400 (1967) |
Variants | |
|---|---|
D10 High Clearance | cultivation tractor |
D12 | two-row tractor |
Allis Chalmers D10 Transmission | |
|---|---|
4-speed sliding gear | |
Transmission details ...  |
Allis Chalmers D10 Power | |
|---|---|
Engine | 31 hp
23.1 kW |
Drawbar (claimed) | 26 hp
19.4 kW |
PTO (claimed) | 30.1 hp
22.4 kW |
Drawbar (tested) | 28.78 hp
21.5 kW |
PTO (tested) | 33.46 hp
25.0 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two-wheel drive | |
Steering | manual |
Differential mechanical shoe brakes | |
Open operator station | |
Hydraulics | |
|---|---|
Type | live |
Valves | 1 or 2 |
Tractor hitch | |
|---|---|
Rear Type | I |
Type | Snap-Couple |
Power Take-off (PTO) | |
|---|---|
Rear PTO | transmission , independent (later) (original) |
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 78.75 inches
200 cm |
Weight | 2,700 lbs
1224 kg |
Front tire | 4.00x15 |
Rear tire | 9x24 |
Full dimensions and tires ...  | |
Belt Pulley | |
|---|---|
RPM | 1220 |
Speed | 2556 ft/min
779.07 meters/min |
References | |
|---|---|
 | |
50 choices that tailor tractor power to your needs published in 1960, by Allis Chalmers | |
D10 D12 farm tractors published in 1961, by Allis Chalmers | |
Series II D-10 D-12 Tractors published in 1963, by Allis Chalmers | |
Series III D-10 D-12 Tractors published in 1966, by Allis Chalmers | |
D-10 Utility Tractor published in 1960, by Allis Chalmers | |
more work... less sweat published in 1962, by Allis Chalmers |
Engine
Engine options | |
|---|---|
Allis-Chalmers 2.3L 4-cyl gasoline | |
Allis-Chalmers 2.4L 4-cyl gasoline |
Engine Detail — 138.7 ci / 2.3 L Gasoline
Manufacturer | Allis-Chalmers Power-Crater |
Fuel Type | Gasoline |
Configuration | 4-cylinder, liquid-cooled vertical L-head |
Original engine, used until 1961. | |
Displacement | 138.7 ci
2.3 L |
Bore/Stroke | 3.375x3.875 inches
86 x 98 mm |
Power | 31 hp
23.1 kW |
Air cleaner | oil bath |
Compression | 7.75:1 |
Rated RPM | 1650 |
Starter volts | 6 |
Oil capacity | 4 qts
3.8 L |
Coolant capacity | 8 qts
7.6 L |
Engine Detail — 149 ci / 2.4 L Gasoline
Manufacturer | Allis-Chalmers |
Fuel Type | Gasoline |
Configuration | 4-cylinder, liquid-cooled |
The larger, 149 cubic inch, engine was introduced at serial number 3501 in 1961. | |
Displacement | 149 ci
2.4 L |
Bore/Stroke | 3.50x3.875 inches
89 x 98 mm |
Air cleaner | oil bath |
Compression | 7.5:1 |
Rated RPM | 1650 |
Firing order | 1-2-4-3 |
Starter volts | 12 |
Transmission
Transmission — 4 forward and 1 reverse sliding gear
Type | sliding gear |
Gears | 4 forward and 1 reverse |
With 9x24 rear tires. | |
 | |
Dimensions
Allis Chalmers D10 Tires | |
|---|---|
Ag front | 4.00x15 |
Ag rear | 9x24 |
Ag front | 5.00x15 |
Ag rear | 10x24 |
Dimensions | |
|---|---|
Wheelbase | 78.75 inches
200 cm |
Length | 120.5 inches
306 cm |
Height (hood) | 52 inches
132 cm |
Height (exhaust) | 76 inches
193 cm |
Shipping weight | 2,700 lbs
1224 kg |
Ballasted weight | 4,800 lbs
2177 kg |
Clearance (front axle) | 21 inches
53 cm |
Clearance (rear axle) | 22.25 inches
56 cm |
Front tread | 40 to 64.7 inches
101 to 164 cm |
Rear tread | 42 to 72 inches
106 to 182 cm |
Tests
Tractor Tests | |
|---|---|
NTTL 724: 138 gasoline 4-speed 2WD | |
NTTL 812: 149 gasoline 4-speed 2WD |
Nebraska Tractor Test 724 | |
|---|---|
138 gasoline 4-speed 2WD
October 13 - 20, 1959
Link: Nebraska Tractor Test 724 file | |
PTO performance | |
Power at rated engine speed | 28.51 hp
21.3 kW |
Fuel use | 2.2 gal/hour
8.3 l/hour |
Drawbar performance | |
Max power | 25.73 hp
19.2 kW |
Fuel use | 2.3 gal/hour
8.7 l/hour |
Gear 3 used for power test. | |
Max pull | 3,555 lbs
1612 kg |
Gear 1 used for pull test. | |
Nebraska Tractor Test 812 | |
|---|---|
149 gasoline 4-speed 2WD
April 3 - 18, 1962
Link: Nebraska Tractor Test 812 file | |
PTO performance | |
Power at rated engine speed | 33.46 hp
25.0 kW |
Fuel use | 2.6 gal/hour
9.8 l/hour |
Drawbar performance | |
Max power | 28.78 hp
21.5 kW |
Fuel use | 2.5 gal/hour
9.5 l/hour |
Gear 3 used for power test. | |
Max pull | 4,106 lbs
1862 kg |
Gear 1 used for pull test. | |
Photos
Allis Chalmers D10
Allis Chalmers D10
Allis Chalmers D10
Allis-Chalmers D-10 operator station and controls.
Allis Chalmers D10 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Allis Chalmers D10.
Converted Equivalents:
Horsepower (HP)31 hp
Kilowatts (kW)23.1 kW
Metric Horsepower (PS / CV)31.4 PS