Allis Chalmers D17

The Allis Chalmers D17 is a tractor produced by Allis Chalmers. It is equipped with a 226 ci 3.7 L engine. The rated power output is 61 hp 45.5 kW. Transmission: Power-Director. Operating weight: 4670 lbs 2118 kg.

Engine Power
61 hp 45.5 kW
Fuel & Capacities
19 gal 71.9 L
Transmission
Power-Director
Operating Weight
4670 lbs 2118 kg

Allis Chalmers D17 Serial Number & Year Decoder

Find the exact manufacture year of your tractor by checking your chassis serial number below.

Where to Find the Serial NumberThe serial number plate is commonly located on the front frame, tractor transmission housing (right side), or instrument panel badge.

Overview

Allis Chalmers D17 tractor photo
1957 - 1967 D SeriesRow-Crop tractor
1957 - 1967
D Series
Row-Crop tractor
Production
Manufacturer
Allis Chalmers
Row-Crop tractor
Built in West Allis, Wisconsin, USA
Total built
84,914 (total)
51,598 (gas)
12,284 (diesel)
Original price was $5,400 in 1967
Allis Chalmers D17 Transmission
8-speed partial power shift
Transmission details ...
Allis Chalmers D17 Power
Engine
63 hp 47.0 kW
Plows
5
Drawbar (tested)
48.64 hp 36.3 kW
Belt (tested)
52.70 hp 39.3 kW
Performance test details ...
Mechanical
Two-wheel drive
Steering
manual
power OptOptional
Mechanical drum brakes
Open operator station.
Capacity
Fuel
19 gal 71.9 L
22.3 gal (LP gas) 84.4 L
Hydraulic system
9.75 gal 36.9 L
Hydraulics
Type
open center
Capacity
9.75 gal 36.9 L
Pressure
2000 psi (Series IV) 137.9 bar
Valves
1
Pump flow
1.5 gpm (Traction-Booster) 5.7 lpm
Total flow
10.5 gpm (main pump Series IV) 39.7 lpm
Tractor hitch
Rear Type
II *Category II hitch was optional on the D17 Series IV.
Type
Snap-Coupler
Power Take-off (PTO)
Rear PTO
live
Rear PTO Type
540 (1.375)
Dimensions & Tires
Gas Wheelbase
93 inches 236 cm
Diesel Wheelbase
95.75 inches 243 cm
Weight
4670 lbs 2118 kg
Front tire
6.00-16
Rear tire
13-28
Full dimensions and tires ...
Electrical
Ground
positive
Charging system
generator
Battery volts
12
References
D17 references literature
Loaders - picking up where the others leave off published in 1979, by Allis Chalmers
50 choices that tailor tractor power to your needs published in 1960, by Allis Chalmers
Powerful New D-17 published in 1957, by Allis Chalmers
D-17 Farm Tractors published in 1960, by Allis Chalmers
Operators Instructions D17 Series III (TM-324A) published in 1962
D-17 Utility Tractor published in 1960, by Allis Chalmers
more work... less sweat published in 1962, by Allis Chalmers
It's here! New One-Ninety XT published in 1965, by Allis Chalmers

Engine

Engine options
Allis-Chalmers 3.7L 4-cyl gasoline
Allis Chalmers 4.3L 6-cyl diesel
Allis-Chalmers 3.7L 4-cyl LP gas

Engine Detail — 226 ci / 3.7 L Gasoline

Manufacturer
Allis-Chalmers
Fuel Type
Gasoline
Configuration
4-cylinder, liquid-cooled vertical I-head
Displacement
226 ci 3.7 L
Bore/Stroke
4.00x4.50 inches 102 x 114 mm
Power
63 hp 47.0 kW
Compression
7.25:1
Rated RPM
1650
Firing order
1-2-4-3
Starter
electric
Starter volts
12
Coolant capacity
14.5 qts 13.7 L
Sparkplug gap
0.025 inches 0.635 mm
Point gap
0.022 inches 0.559 mm
Intake valve clearance
0.013 inches (hot) 0.330 mm
Exhaust valve clearance
0.013 inches (hot) 0.330 mm

Engine Detail — 262 ci / 4.3 L Diesel

Manufacturer
Allis Chalmers
Fuel Type
Diesel
Configuration
6-cylinder, liquid-cooled vertical I-head
Displacement
262 ci 4.3 L
Bore/Stroke
3.5625x4.375 inches 90 x 111 mm
Power
61 hp 45.5 kW
Compression
15.7:1
Rated RPM
1650
Oil capacity
6 qts 5.7 L
Coolant capacity
16 qts 15.1 L

Engine Detail — 226 ci / 3.7 L LP Gas

Manufacturer
Allis-Chalmers
Fuel Type
LP gas
Configuration
4-cylinder, liquid-cooled vertical I-head
Displacement
226 ci 3.7 L
Bore/Stroke
4.00x4.50 inches 102 x 114 mm
Compression
8.25:1
Rated RPM
1650
Firing order
1-2-4-3

Transmission

Transmission — Power-Director

Transmission
Power-Director
Type
partial power shift
Gears
8 forward and 2 reverse
Clutch
dry disc (main)
wet disc (Power Director)
Oil capacity
25 qts 23.7 L
Oil type
SAE 80 EP
The transmission offers four speeds forward and one reverse. The separate Power-Director hand lever provides an on-the-go shift between direct and a lower drive, plus a neutral position that allows the PTO to continue operation.
With 14.9-28 rear tires.
D17 Power-Director partial power shift speeds

Dimensions

Allis Chalmers D17 Tires
Ag front
6.00-16
Ag rear
13-28
14.9-28 *After SN42001
Dimensions
Gas Wheelbase
93 inches 236 cm
Diesel Wheelbase
95.75 inches 243 cm
Gas Length
140 inches 355 cm
Diesel Length
143 inches 363 cm
Width
76.75 inches 194 cm
Height (hood)
62 inches 157 cm
Height (exhaust)
81 inches 205 cm
Operating weight
4670 lbs 2118 kg
Ballasted weight
9395 lbs 4261 kg
Front tread
53 to 79 inches 134 to 200 cm
Rear tread
58 to 92 inches 147 to 233 cm

Tests

Tractor Tests
NTTL 635: gasoline Power-Director 2WD
NTTL 636: diesel Power-Director 2WD
NTTL 644: LP gas Power-Director 2WD
Nebraska Tractor Test 635
Gasoline Power-Director 2WD November 14 - 25, 1957 Link: Nebraska Tractor Test 635 file
Belt power (max)
52.70 hp 39.3 kW
Belt fuel use (max)
4.5 gal/hour 17.0 l/hour
Drawbar performance
Max power
48.64 hp 36.3 kW
Gear 3-High used for power test.
Max pull
7,061 lbs 3202 kg
Gear 1-Low used for pull test.
Nebraska Tractor Test 636
Diesel Power-Director 2WD November 14, 1975 - November 26, 1957 Link: Nebraska Tractor Test 636 file
Belt power (max)
51.14 hp 38.1 kW
Belt fuel use (max)
3.7 gal/hour 14.0 l/hour
Drawbar performance
Max power
46.16 hp 34.4 kW
Gear 2-High used for power test.
Max pull
7,126 lbs 3232 kg
Gear 1-High used for pull test.
Nebraska Tractor Test 644
LP gas Power-Director 2WD April 1 - 12, 1958 Link: Nebraska Tractor Test 644 file
Belt power (max)
50.79 hp 37.9 kW
Belt fuel use (max)
5.4 gal/hour 20.4 l/hour
Drawbar performance
Max power
46.23 hp 34.5 kW
Gear 3-High used for power test.
Max pull
6,845 lbs 3104 kg
Gear 1-High used for pull test.

Attachments

Attachment overview
Allis Chalmers 400 loader
Allis Chalmers 500 loader

Photos

Allis-Chalmers D17 Series I.

Allis-Chalmers D17 Series I.

LP-gas Allis-Chalmers D17

LP-gas Allis-Chalmers D17

Allis-Chalmers D17 Series III with front-end loader.

Allis-Chalmers D17 Series III with front-end loader.

Allis-Chalmers D17 Series III with front-end loader.

Allis-Chalmers D17 Series III with front-end loader.

Allis Chalmers D17 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Allis Chalmers D17.

Converted Equivalents:

Horsepower (HP)61 hp
Kilowatts (kW)45.5 kW
Metric Horsepower (PS / CV)61.8 PS