Allis Chalmers T16

The Allis Chalmers T16 is a tractor produced by Allis Chalmers. It is equipped with a 426 ci 7.0 L engine. The listed engine power is Diesel (listed): 135 hp / 100.7 kW. Transmission: Allison Torq-matic. Drive type: 4x4 4WD. Operating weight: 16300 lbs 7393 kg.

Engine Power

Diesel (listed): 135 hp / 100.7 kW

Drive & Traction

4x4 4WD

Transmission

Allison Torq-matic

Operating Weight

16300 lbs 7393 kg

Overview

	1963 - 1964 Four-wheel Drive (4WD) tractor

Production
Manufacturer	Allis Chalmers
Four-wheel Drive (4WD) tractor
Built in Deerfield, Illinois, USA
Total built	15
The Allis-Chalmers T16 was based on the TL16 industrial loader. In field work, the tractor suffered from problems with the engine and transmission. Yellow versions of the tractor were sold through the Allis industrial division as the "Sugar Babe" for use in cane fields as a haulage tractor.

Allis Chalmers T16 Transmission
4-speed power shift with torque converter
Transmission details ...

Allis Chalmers T16 Power
Engine	135 hp 100.7 kW

Mechanical
Drive	4x4 4WD
Final drives	planetary
Power steering
Hydraulic brakes
Open operator station.

Dimensions & Tires
Wheelbase	96 inches 243 cm
Weight	16300 lbs 7393 kg
Front tire	20.5-25
Rear tire	20.5-25
Full dimensions and tires ...

Electrical
Charging system	generator
Batteries	2
Battery volts	12

References

T-16 Four-Wheel-Drive-Tractor published in 1962, by Allis Chalmers

Engine

Engine options
Allis Chalmers 5.6L 4-cyl diesel
Allis Chalmers 7.0L 6-cyl diesel

Engine Detail — 344 ci / 5.6 L Diesel

Manufacturer	Allis Chalmers 7000
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	344 ci 5.6 L
Bore/Stroke	4.437x5.562 inches 113 x 141 mm
Power	135 hp 100.7 kW
Air cleaner	dry
Rated RPM	2200
Torque	360 lb-ft 488.2 Nm
Torque RPM	1650
Starter	electric
Starter volts	24

Engine Detail — 426 ci / 7.0 L Diesel

Manufacturer	Allis Chalmers
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled, The four-cylinder 7.0L engine was introduced at serial number 1910 due to problems with the original four-cylinder engine.
Displacement	426 ci 7.0 L
Bore/Stroke	4.25x5.00 inches 108 x 127 mm
Rated RPM	2200
Starter type	electric

Transmission

Transmission — Allison Torq-matic

Transmission	Allison Torq-matic
Type	power shift with torque converter
Gears	4 forward and 2 reverse
With 20.5-25 tires.

Dimensions

Allis Chalmers T16 Tires
Standard tires (ag)	Front: 20.5-25. Rear: 20.5-25
Optional tires (ag)	Front: 23.5-25. Rear: 23.5-25

Dimensions
Wheelbase	96 inches 243 cm
Length	171.5 inches 435 cm
Width	92 inches 233 cm
Height	87 inches 220 cm
Shipping weight	16300 lbs 7393 kg
Ground clearance	17 inches 43 cm
Front tread	74.25 inches 188 cm
Rear tread	74.25 inches 188 cm

Photos

Allis Chalmers T16 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Allis Chalmers T16 based on its 135 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Allis Chalmers T16.

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours