Allis Chalmers 718

The Allis Chalmers 718 is a tractor produced by Allis Chalmers Lawn Tractors. It is equipped with a 588 cc 35.9 ci engine. The listed engine power is Gasoline (listed): 18 hp / 13.4 kW. Transmission: infinite forward and reverse. Operating weight: 831 lbs 376 kg.

Engine Power
Gasoline (listed): 18 hp / 13.4 kW
Fuel & Capacities
3 gal 11.4 L
Transmission
infinite forward and reverse
Operating Weight
831 lbs 376 kg

Overview

Allis Chalmers 718 tractor photo
1978 - 1979 700 SeriesGarden tractor 700 Series Garden tractor
Production
Manufacturer
Allis Chalmers
Garden tractor
Built in Port Washington, Wisconsin, USA
Original price was $3,275 in 1979
Allis Chalmers 718 Engine
18HP Kohler 588cc 1-cyl gasoline
Fuel tank
3 gal 11.4 L
Engine details ...
Allis Chalmers 718 Transmission
hydrostatic
Transmission details ...
Mechanical
Two-wheel drive
Manual steering
Drum brakes
Open operator station.
Tractor hitch
Type
sleeve hitch OptOptional
Power Take-off (PTO)
Mid PTO
independent
Clutch
manual
Dimensions & Tires
Wheelbase
48.1 inches 122 cm
Weight
831 lbs 376 kg
Front tire
16x6.50-8
Rear tire
23x10.50-12
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
flywheel alternator
Charging amps
16
Battery volts
12
Battery AH
45
References
718 references literature
Operator's Manual Models 700 Series (1664443) published in 1978
Lawn and Garden Tractors published in 1979, by Allis-Chalmers

Engine

Engine Detail — 588 cc / 35.9 ci Gasoline

Manufacturer
Kohler K361
Fuel Type
Gasoline
Configuration
1-cylinder, air-cooled horizontal-shaft
Displacement
588 cc 35.9 ci
Bore/Stroke
3.75x3.25 inches 95 x 83 mm
Power
18 hp 13.4 kW
Air cleaner
dry
Rated RPM
3600
Starter
electric
Starter volts
12
Oil capacity
2 qts 1.9 L
Oil change
25 h
Allis Chalmers 718 Engine
Allis Chalmers 718 engine image

Transmission

Transmission — infinite forward and reverse belt-driven hydrostatic

Type
belt-driven hydrostatic
Gears
infinite forward and reverse
Oil change
annually
718  belt-driven hydrostatic speeds

Dimensions

Allis Chalmers 718 Tires
Lawn/turf front
16x6.50-8
Lawn/turf rear
23x10.50-12
Dimensions
Wheelbase
48.1 inches 122 cm
Length
67 inches 170 cm
Width
37.5 inches 95 cm
Height
39.3 inches 99 cm
Weight
831 lbs 376 kg
Ground clearance
8 inches 20 cm
Front tread
30 inches 76 cm
Rear tread
27 inches 68 cm

Attachments

Attachment overview
42" mid-mount mower deck
48" mid-mount mower deck
Snowblower
Blade
Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments.

Photos

Allis Chalmers 718

Allis Chalmers 718

Recommended Implements & Sizing Guide

Engineering recommendations for Allis Chalmers Lawn Tractors Allis Chalmers 718 based on its 18 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
4 ft (48 in)1.2 mLight DutyPasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep
42 to 48 in105 - 120 cmLight DutyCovers compact tractor tire width.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Allis Chalmers Lawn Tractors Allis Chalmers 718.

Estimated Continuous Field Runtime: 3.2 hrs

Approximately 3.2 hours of continuous field operation at ~75% rated power on a full tank (3 gal / 11.4 L).

Estimated 75% Load Fuel Burn~0.9 gal/hr (3.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Allis Chalmers Lawn Tractors Allis Chalmers 718 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Allis Chalmers Lawn Tractors Allis Chalmers 718.

Converted Equivalents:

Horsepower (HP)18 hp
Kilowatts (kW)13.4 kW
Metric Horsepower (PS / CV)18.2 PS

Direct Competitor Comparison

Compare Allis Chalmers 718 against same-era industry alternatives in the same horsepower class.

Current Model
Allis Chalmers Lawn Tractors

Allis Chalmers 718

Engine Power:Gasoline (listed): 18 hp / 13.4 kW
★ Baseline Reference
KubotaMarket Competitor

Kubota B72

Engine Power:16.2
Production Years:1998 - 2001
Massey FergusonMarket Competitor

Massey Ferguson 1120

Engine Power:16.6
Production Years:1993 - 1996
International HarvesterMarket Competitor

International Harvester Type A 15HP

Engine Power:16.7
Production Years:1908 - 1911
MitsubishiMarket Competitor

Mitsubishi GF17

Engine Power:16.2
Production Years:2004 - 2005