Antonio Carraro SRX 8400

The Antonio Carraro SRX 8400 is a tractor produced by Antonio Carraro. It is equipped with a 136 ci 2.2 L engine. The listed engine power is Diesel (gross): 70 hp / 52.2 kW. Transmission: 16 forward and reverse. Operating weight: 4486 lbs (ROPS) 2034 kg.

Engine Power

Diesel (gross): 70 hp / 52.2 kW

Fuel & Capacities

13.2 gal 50.0 L

Transmission

16 forward and reverse

Operating Weight

4486 lbs (ROPS) 2034 kg

Overview

	Ergit 100 SeriesOrchard/Vineyard tractor
Ergit 100 Series
Orchard/Vineyard tractor

Production
Manufacturer	Antonio Carraro
Orchard/Vineyard tractor
Built in Italy

Antonio Carraro SRX 8400 Engine
VM Motori 2.2L 3-cyl diesel
Fuel tank	13.2 gal 50.0 L
Engine details ...

Antonio Carraro SRX 8400 Transmission
16-speed
Transmission details ...

Antonio Carraro SRX 8400 Power
Engine (gross)	70 hp 52.2 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic rear
	electro-hydraulic front optional
Steering	hydraulic power
Hydraulic wet disc brakes
Two-post foldable ROPS. Optional StarLight cab with air-conditioning.

Tractor hitch
Rear Type	II/I
Rear lift	5291 lbs 2399 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic
Rear PTO Type	540/540E (1.375)
Front PTO	independent (optional)
Front PTO Type	1000

Dimensions & Tires
Wheelbase	52.9 inches 134 cm
Weight	4486 to 4795 pounds
Front tire	9.5R20
Rear tire	9.5R20
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 136 ci / 2.2 L Diesel

Manufacturer	VM Motori D753
Configuration	turbocharged intercooled diesel, 3-cylinder, liquid-cooled
Displacement	136 ci 2.2 L
Bore/Stroke	3.70x4.213 inches 94 x 107 mm
Emissions	Stage 3A
Rated Power (gross)	70 hp 52.2 kW
Fuel system	direct injection
Rated RPM	2300
Torque	188.1 lb-ft 255.1 Nm
Torque RPM	1650
Firing order	1-3-2
Starter	electric
Starter volts	12

Transmission

Transmission — 16 forward and reverse

Gears

16 forward and reverse

Dimensions

Antonio Carraro SRX 8400 Tires
Standard tires (ag)	Front: 9.5R20. Rear: 9.5R20
Optional tires (ag)	Front: 300/70R20. Rear: 300/70R20
	Front: 11.2R20. Rear: 11.2R20
	Front: 320/70R20. Rear: 320/70R20
	Front: 320/65R18. Rear: 320/65R18
	Front: 340/65R18. Rear: 320/65R18

Dimensions
Wheelbase	52.9 inches 134 cm
Length	133.5 inches 339 cm
Width	41.7 inches (min) 105 cm
Height (ROPS)	89.8 inches 228 cm
Height (cab)	84.2 inches 213 cm
Weight	4486 lbs (ROPS) 2034 kg
	4795 lbs (Cab) 2175 kg

Photos

Antonio Carraro SRX 8400 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Antonio Carraro SRX 8400 based on its 70 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Antonio Carraro SRX 8400.

Estimated Continuous Field Runtime: 3.6 hrs

Approximately 3.6 hours of continuous field operation at ~75% rated power on a full tank (13.2 gal / 50 L).

Estimated 75% Load Fuel Burn~3.6 gal/hr (13.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours