Massey Ferguson 2220

The Massey Ferguson 2220 is a tractor produced by Massey Ferguson. It is equipped with a 165 ci 2.7 L engine. The listed engine power is Diesel (listed): 63 hp / 47.0 kW. Transmission: 15 forward and reverse. Operating weight: 5820 to 5952 pounds.

Engine Power

Diesel (listed): 63 hp / 47.0 kW

Fuel & Capacities

14 gal 53.0 L

Transmission

15 forward and reverse

Operating Weight

5820 to 5952 pounds

Overview

	1999 - 2001 2200 SeriesCompact Utility tractor 2200 Series Compact Utility tractor

Production
Manufacturer	Massey Ferguson
Compact Utility tractor

Massey Ferguson 2220 Engine
Perkins 2.7L 3-cyl diesel
Fuel tank	14 gal 53.0 L
Engine details ...

Massey Ferguson 2220 Transmission
15-speed sync shuttle
Transmission details ...

Massey Ferguson 2220 Power
Engine	63 hp 47.0 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic
Power steering
Hydraulic wet disc brakes
Trailer brakes	hydraulic OptOptional
Cab standard with heat. Air-conditioning optional. Flat platform with Two-post ROPS available.

Hydraulics
Type	open center
Pressure	2611 psi 180.0 bar
Valves	3
Total flow	14.2 gpm 53.7 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift	4630 lbs 2100 kg
	7496 lbsOptOptional 3400 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540/750 (1.375)

Dimensions & Tires
Wheelbase	79 inches 200 cm
Weight	5820 to 5952 pounds
Front tire	320/70R20
Rear tire	420/70R28
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

MF 2200 published in 1999, by Massey Ferguson

Engine

Engine Detail — 165 ci / 2.7 L Diesel

Manufacturer	Perkins 903-27T
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	165 ci 2.7 L
Bore/Stroke	3.74x5.00 inches 95 x 127 mm
Power	63 hp 47.0 kW
Fuel system	direct injection
Air cleaner	dry
Compression	17.5:1
Rated RPM	2700
Torque	187.3 lb-ft 254.0 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission — 15 forward and reverse sync shuttle

Type	sync shuttle
Gears	15 forward and reverse
Clutch	279.4 mechanical dry disc
Also available with creeper providing 25 gears in each direction.

Dimensions

Massey Ferguson 2220 Tires
Standard tires (ag)	Front: 320/70R20. Rear: 420/70R28
Optional tires (ag)	Front: 12.4R20. Rear: 14.9R30
	Front: 8.3-24. Rear: 12.4R32
	Front: 11.2R20. Rear: 14.9R28
	Front: 280/70R20. Rear: 420/70R24

Dimensions
Wheelbase	79 inches 200 cm
Length	155.5 inches 394 cm
Width	69.2 inches 175 cm
Height (cab)	92.7 inches 235 cm
ROPS Weight	5820 lbs 2639 kg
Cab Weight	5952 lbs 2699 kg
Ground clearance	12 inches 30 cm
Front tread	56.5 to 66.8 inches 143 to 169 cm
Rear tread	52.7 to 72.8 inches 133 to 184 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 2220 based on its 63 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 2220.

Estimated Continuous Field Runtime: 4.3 hrs

Approximately 4.3 hours of continuous field operation at ~75% rated power on a full tank (14 gal / 53 L).

Estimated 75% Load Fuel Burn~3.3 gal/hr (12.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours