ArmaTrac 604

The ArmaTrac 604 is a tractor produced by Armatrac. It is equipped with a 201.4 ci 3.3 L engine. The listed engine power is Diesel (listed): 57.7 hp / 43.0 kW. Transmission: 16 forward and 8 reverse. Operating weight: 7,253 lbs 3289 kg.

Engine Power
Diesel (listed): 57.7 hp / 43.0 kW
Fuel & Capacities
18.5 gal 70.0 L
Transmission
16 forward and 8 reverse
Operating Weight
7,253 lbs 3289 kg

Overview

ArmaTrac 604 tractor photo
Production
Manufacturer
ArmaTrac
Built in Ankara, Turkey
The ArmaTrac 604 is the same as the Erkunt Bereket 4x4
ArmaTrac 604 Engine
Perkins 3.3L 3-cyl diesel
Fuel tank
18.5 gal 70.0 L
Engine details ...
ArmaTrac 604 Transmission
16-speed
Transmission details ...
ArmaTrac 604 Power
Engine
57.7 hp 43.0 kW
Mechanical
Four-wheel drive
Multiple wet disc brakes
Hydraulics
Total flow
10.04 gpm 38.0 lpm
Steering press.
155.9 psi 10.7 bar
Tractor hitch
Rear lift
5,291 lbs 2399 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540/750
Dimensions & Tires
Wheelbase
87 inches 220 cm
Full dimensions and tires ...

Engine

Engine Detail — 201.4 ci / 3.3 L Diesel

Manufacturer
Perkins 1103C-33
Fuel Type
Diesel
Configuration
3-cylinder
Displacement
201.4 ci 3.3 L
Bore/Stroke
4.134x5.00 inches 105 x 127 mm
Power
57.7 hp 43.0 kW
Air cleaner
dry with internal prefilter
Compression
19.25:1
Rated RPM
2200
Torque
163.7 lb-ft 222.0 Nm
Torque RPM
1400
Oil capacity
7.4 qts 7.0 L

Transmission

Transmission — 16 forward and 8 reverse

Gears
16 forward and 8 reverse

Dimensions

ArmaTrac 604 Tires
Dimensions
Wheelbase
87 inches 220 cm
Width
76.2 inches 193 cm
Height
101.2 inches 257 cm
Ballasted weight
7,253 lbs 3289 kg
Ground clearance
13 inches 33 cm

Photos

ArmaTrac 604 tractor photo

ArmaTrac 604 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Armatrac 604 based on its 57.7 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
3 to 4 Bottom (16")3 - 4 铧 (40 cm)Heavy DutySuitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
Small Square Baler (14x18")小方捆打捆机 (36x46 cm)Medium DutyClassic 2-string baler for horse and small livestock hay.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Armatrac 604.

Estimated Continuous Field Runtime: 6.2 hrs

Approximately 6.2 hours of continuous field operation at ~75% rated power on a full tank (18.5 gal / 70 L).

Estimated 75% Load Fuel Burn~3 gal/hr (11.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Armatrac 604 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Armatrac 604.

Converted Equivalents:

Horsepower (HP)57.7 hp
Kilowatts (kW)43 kW
Metric Horsepower (PS / CV)58.5 PS

Direct Competitor Comparison

Compare ArmaTrac 604 against same-era industry alternatives in the same horsepower class.

Current Model
Armatrac

ArmaTrac 604

Engine Power:Diesel (listed): 57.7 hp / 43.0 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1180

Engine Power:52
Production Years:1992 - 1999
New HollandMarket Competitor

New Holland 3030

Engine Power:52
Production Years:1994 - 2004
FordMarket Competitor

Ford 4100

Engine Power:52
Production Years:1975 - 1981
CaseIHMarket Competitor

CaseIH 485XL

Engine Power:52
Production Years:1985 - 1990