Belarus 1025 MIG
The Belarus 1025 MIG is a tractor produced by Belarus. It is equipped with a 289.9 ci 4.8 L engine. The listed engine power is Diesel (listed): 115 hp / 85.8 kW. Transmission: 16 forward and 8 reverse. Operating weight: 9469 lbs 4295 kg.
Engine Power
Diesel (listed): 115 hp / 85.8 kW
Fuel & Capacities
41.2 gal
155.9 L
Transmission
16 forward and 8 reverse
Operating Weight
9469 lbs
4295 kg
Overview
 | 2004 - ????
MIG SeriesUtility tractorPronar built |
|---|---|
2004 - ???? | |
MIG Series | |
Utility tractor | |
Pronar built | |
2004 - ???? | |
|---|---|
MIG Series | |
Utility tractor | |
Pronar built |
Production | |
|---|---|
Distributor | Belarus |
Manufacturer | Pronar |
Utility tractor | |
Built in Poland | |
Belarus 1025 MIG Engine | |
|---|---|
Belarus 4.8L 4-cyl diesel | |
Engine details ...  |
Belarus 1025 MIG Transmission | |
|---|---|
16-speed synchromesh | |
Transmission details ...  |
Belarus 1025 MIG Power | |
|---|---|
Engine | 115 hp
85.8 kW |
Mechanical | |
|---|---|
Differential lock | hydraulic |
Power steering | |
Dry disc brakes | |
Cab standard with air-conditioning. | |
Capacity | |
|---|---|
Fuel | 41.2 gal
155.9 L |
Hydraulic system | 5.8 gal
22.0 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 5.8 gal
22.0 L |
Valves | 3 |
Pump flow | 14 gpm
53.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 9921 lbs
4500 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Weight | 9469 lbs
4295 kg |
Front tire | 360/70R24 |
Rear tire | 480/70R38 |
Full dimensions and tires ...  | |
Engine
| 2004 - ????
MIG SeriesUtility tractorPronar built |
|---|---|
2004 - ???? | |
MIG Series | |
Utility tractor | |
Pronar built | |
2004 - ???? | |
|---|---|
MIG Series | |
Utility tractor | |
Pronar built |
Engine Detail — 289.9 ci / 4.8 L Diesel
Manufacturer | Belarus D-242c |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 289.9 ci
4.8 L |
Bore/Stroke | 4.331x4.921 inches
110 x 125 mm |
Power | 115 hp
85.8 kW |
Fuel system | direct injection |
Rated RPM | 2200 |
Starter | electric |
Starter volts | 24 |
Oil capacity | 15.9 qts
15.0 L |
Coolant capacity | 21.1 qts
20.0 L |
Transmission
| 2004 - ????
MIG SeriesUtility tractorPronar built |
|---|---|
2004 - ???? | |
MIG Series | |
Utility tractor | |
Pronar built | |
2004 - ???? | |
|---|---|
MIG Series | |
Utility tractor | |
Pronar built |
Transmission — 16 forward and 8 reverse synchromesh
Type | synchromesh |
Gears | 16 forward and 8 reverse |
Clutch | dry disc |
Oil capacity | 42.3 qts
40.0 L |
Dimensions
| 2004 - ????
MIG SeriesUtility tractorPronar built |
|---|---|
2004 - ???? | |
MIG Series | |
Utility tractor | |
Pronar built | |
2004 - ???? | |
|---|---|
MIG Series | |
Utility tractor | |
Pronar built |
Belarus 1025 MIG Tires | |
|---|---|
Ag front | 360/70R24 |
Ag rear | 480/70R38 |
Dimensions | |
|---|---|
Length | 165.9 inches
421 cm |
Width | 78 inches
198 cm |
Height | 113.6 inches
288 cm |
Weight | 9469 lbs
4295 kg |
Clearance (front axle) | 17.7 inches
44 cm |
Clearance (rear axle) | 16.9 inches
42 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Belarus 1025 MIG based on its 115 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Belarus 1025 MIG.
Estimated Continuous Field Runtime: 6.9 hrs
Approximately 6.9 hours of continuous field operation at ~75% rated power on a full tank (41.2 gal / 156 L).
Estimated 75% Load Fuel Burn~6 gal/hr (22.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Belarus 1025 MIG Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Belarus 1025 MIG.
Converted Equivalents:
Horsepower (HP)115 hp
Kilowatts (kW)85.8 kW
Metric Horsepower (PS / CV)116.6 PS
Direct Competitor Comparison
Compare Belarus 1025 MIG against same-era industry alternatives in the same horsepower class.
Current Model
Belarus
Belarus 1025 MIG
Engine Power:Diesel (listed): 115 hp / 85.8 kW
★ Baseline Reference
Related models
Belarus 5180
- Power:
- 94.4
- Production years:
- 1994 - 1995
Belarus 5280
- Power:
- 94.4
- Production years:
- 1996 - 1996
Belarus 5380
- Power:
- 94.4
- Production years:
- 1997 - 2007
Belarus 5480
- Power:
- 94.4
- Production years:
- 1999 - 2009
Belarus 9011
- Power:
- 98
- Production years:
- 1997 - 1999