Benye 250C

The Benye 250C is a tractor produced by Benye. It is equipped with a 100.7 ci 1.7 L engine. The listed engine power is Diesel (listed): 25 hp / 18.6 kW. Transmission: 6 forward and 2 reverse. Operating weight: 2,315 lbs 1050 kg.

Engine Power
Diesel (listed): 25 hp / 18.6 kW
Fuel & Capacities
5.8 gal 22.0 L
Transmission
6 forward and 2 reverse
Operating Weight
2,315 lbs 1050 kg

Overview

No photo available
Production
Manufacturer
Benye
Built in Ningbo, Zhejiang, China
Variants
254C
4WD
Benye 250C Engine
1.7L 2-cyl diesel
Fuel tank
5.8 gal 22.0 L
Engine details ...
Benye 250C Transmission
6-speed
Transmission details ...
Benye 250C Power
Engine
25 hp 18.6 kW
PTO (claimed)
22.1 hp 16.5 kW
Mechanical
Two-wheel drive
Steering
manual
Shoe brakes
Tractor hitch
Rear Type
0
Rear lift
933 lbs 423 kg
Power Take-off (PTO)
Rear PTO Type
540/1000
Dimensions & Tires
Wheelbase
57.3 inches 145 cm
Weight
2,315 lbs 1050 kg
Full dimensions and tires ...

Engine

Engine Detail — 100.7 ci / 1.7 L Diesel

Manufacturer
TY2100IT
Fuel Type
Diesel
Configuration
2-cylinder, liquid-cooled
Displacement
100.7 ci 1.7 L
Bore/Stroke
3.937x4.134 inches 100 x 105 mm
Power
25 hp 18.6 kW
Rated RPM
2300

Transmission

Transmission — 6 forward and 2 reverse

Gears
6 forward and 2 reverse

Dimensions

Benye 250C Tires
Dimensions
Wheelbase
57.3 inches 145 cm
Length
108.7 inches 276 cm
Width
58.3 inches 148 cm
Height
76.0 inches 193 cm
Weight
2,315 lbs 1050 kg
Ground clearance
13.8 inches 35 cm

Recommended Implements & Sizing Guide

Engineering recommendations for Benye 250C based on its 25 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
5 ft (60 in)1.5 mMedium DutyPasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep
54 to 60 in135 - 150 cmMedium DutyThorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Benye 250C.

Estimated Continuous Field Runtime: 4.5 hrs

Approximately 4.5 hours of continuous field operation at ~75% rated power on a full tank (5.8 gal / 22 L).

Estimated 75% Load Fuel Burn~1.3 gal/hr (4.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Benye 250C Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Benye 250C.

Converted Equivalents:

Horsepower (HP)25 hp
Kilowatts (kW)18.6 kW
Metric Horsepower (PS / CV)25.3 PS

Direct Competitor Comparison

Compare Benye 250C against same-era industry alternatives in the same horsepower class.

Current Model
Benye

Benye 250C

Engine Power:Diesel (listed): 25 hp / 18.6 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1523

Engine Power:22.5
Production Years:2005 - 2010
KubotaMarket Competitor

Kubota B9200

Engine Power:22.5
Production Years:1986 - 1990
ChallengerMarket Competitor

Challenger MT225B

Engine Power:22.5
Production Years:2005 - 2008
AGCOMarket Competitor

AGCO ST22A

Engine Power:22.5
Production Years:2003 - 2008