Branson 6640C
The Branson 6640C is a tractor produced by Branson. It is equipped with a 208 ci 3.4 L engine. The listed engine power is Diesel (listed): 66 hp / 49.2 kW. Transmission: 24 forward and reverse. Operating weight: 1620 lbs 734 kg.
Engine Power
Diesel (listed): 66 hp / 49.2 kW
Fuel & Capacities
24 gal
90.8 L
Transmission
24 forward and reverse
Operating Weight
1620 lbs
734 kg
Overview
![]() | 2012 -
40 SeriesUtility tractor |
|---|---|
2012 - | |
40 Series | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | Branson |
Utility tractor | |
Branson 6640C Engine | |
|---|---|
Kukje 3.4L 4-cyl diesel | |
Fuel tank | 24 gal
90.8 L |
Engine details ... | |
Branson 6640C Transmission | |
|---|---|
24-speed syncro shuttle | |
Transmission details ... |
Branson 6640C Power | |
|---|---|
Engine | 66 hp
49.2 kW |
PTO (claimed) | 57 hp
42.5 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Wet disc brakes | |
Cab standard. | |
Hydraulics | |
|---|---|
Type | open center |
Mid valves | 2 |
Pump flow | 11.1 gpm
42.0 lpm |
Steering flow | 6.9 gpm
26.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 4800 lbs
2177 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/670/1000 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 80 inches
203 cm |
Weight | 5825 lbs
2642 kg |
Front tire | 12.5/80-18 |
Rear tire | 16.9-28 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 208 ci / 3.4 L Diesel
Manufacturer | Kukje D3400NA |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 208 ci
3.4 L |
Bore/Stroke | 3.858x4.449 inches
98 x 113 mm |
Power | 66 hp
49.2 kW |
Fuel use | 2.4 gal/hour
9.1 l/hour |
Air cleaner | dry |
Pre-heating | air heater |
Compression | 19.5:1 |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 24 forward and reverse syncro shuttle
Type | syncro shuttle |
Gears | 24 forward and reverse |
Clutch | dry disc |
Dimensions
Branson 6640C Tires | |
|---|---|
Ag front | 12.5/80-18 |
Ag rear | 16.9-28 |
Lawn/turf front | 31x15.50-15 |
Lawn/turf rear | LSW570x648 |
Industrial front | 12.5/80-18 |
Industrial rear | 16.9-28 |
Dimensions | |
|---|---|
Wheelbase | 80 inches
203 cm |
Length | 142 inches
360 cm |
Width | 73 inches
185 cm |
Height | 101 inches
256 cm |
Weight | 5825 lbs
2642 kg |
Ground clearance | 15 inches
38 cm |
Front tread | 70 to 74.3 inches
177 to 188 cm |
Rear tread | 70 to 74.4 inches
177 to 188 cm |
Attachments
Attachment overview | |
|---|---|
Front-end loader | |
Backhoe |
Branson B9620 Backhoe | |
|---|---|
Backhoe type | Branson B9620 Backhoe |
Weight | 1620 lbs
734 kg |
Digging depth | 121 inches
307 cm |
2-Foot flat digging depth | 115 inches
292 cm |
Reach from pivot | 149 inches
378 cm |
Loading height | 92 inches
233 cm |
Bucket Rotation | 180° |
Swing Arc | 180° |
Bucket force | 4575 lbs
2075 kg |
Dipperstick force | 3175 lbs
1440 kg |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Branson 6640C based on its 66 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Branson 6640C.
Estimated Continuous Field Runtime: 7 hrs
Approximately 7 hours of continuous field operation at ~75% rated power on a full tank (24 gal / 90.8 L).
Estimated 75% Load Fuel Burn~3.4 gal/hr (13 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Branson 6640C Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Branson 6640C.
Converted Equivalents:
Horsepower (HP)66 hp
Kilowatts (kW)49.2 kW
Metric Horsepower (PS / CV)66.9 PS
Direct Competitor Comparison
Compare Branson 6640C against same-era industry alternatives in the same horsepower class.
Current Model
Branson
Branson 6640C
Engine Power:Diesel (listed): 66 hp / 49.2 kW
★ Baseline Reference
Related models
Branson 5220C
- Power:
- 55
- Production years:
- 2012 - 2021
Branson 5220CH
- Power:
- 55
- Production years:
- 2016 - 2020
Branson 5220H
- Power:
- 55
- Production years:
- 2016 - 2020
Branson 5220R
- Power:
- 55
- Production years:
- 2011 - 2021
Branson 5520C
- Power:
- 55
- Production years:
- 2021 - 2026

