Branson 8050
The Branson 8050 is a tractor produced by Branson. It is equipped with a 208 ci 3.4 L engine. The listed engine power is Diesel (listed): 78 hp / 58.2 kW. Transmission: 16 forward and reverse. Operating weight: 7910 lbs 3587 kg.
Engine Power
Diesel (listed): 78 hp / 58.2 kW
Fuel & Capacities
31.7 gal
120.0 L
Transmission
16 forward and reverse
Operating Weight
7910 lbs
3587 kg
Overview
![]() | 2012 -
50 SeriesUtility tractor |
|---|---|
2012 - | |
50 Series | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | Branson |
Utility tractor | |
Branson 8050 Engine | |
|---|---|
Kukje 3.4L 4-cyl diesel | |
Fuel tank | 31.7 gal
120.0 L |
Engine details ... | |
Branson 8050 Transmission | |
|---|---|
16-speed syncro shuttle | |
Transmission details ... |
Branson 8050 Power | |
|---|---|
Engine | 78 hp
58.2 kW |
PTO (claimed) | 65 hp
48.5 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Wet disc brakes | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | open center |
Mid valves | 2 |
Pump flow | 14.5 gpm
54.9 lpm |
Steering flow | 8 gpm
30.3 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Rear lift | 5000 lbs
2268 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/760 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 88 inches
223 cm |
Weight | 7910 lbs
3587 kg |
Front tire | 11.2R24 |
Rear tire | 18.4R30 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 208 ci / 3.4 L Diesel
Manufacturer | Kukje D3400T5 |
Configuration | turbocharged diesel, 4-cylinder, liquid-cooled |
Displacement | 208 ci
3.4 L |
Bore/Stroke | 3.858x4.449 inches
98 x 113 mm |
Power | 78 hp
58.2 kW |
Air cleaner | dry |
Pre-heating | air heater |
Compression | 18.5:1 |
Rated RPM | 2500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 16 forward and reverse syncro shuttle
Type | syncro shuttle |
Gears | 16 forward and reverse |
Clutch | wet disc |
Dimensions
Branson 8050 Tires | |
|---|---|
Ag front | 11.2R24 |
Ag rear | 18.4R30 |
Dimensions | |
|---|---|
Wheelbase | 88 inches
223 cm |
Length | 157 inches
398 cm |
Width | 76 inches
193 cm |
Height | 106 inches
269 cm |
Weight | 7910 lbs
3587 kg |
Ground clearance | 16.7 inches
42 cm |
Front tread | 72 inches
182 cm |
Rear tread | 72 inches
182 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Branson 8050 based on its 78 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Branson 8050.
Estimated Continuous Field Runtime: 7.8 hrs
Approximately 7.8 hours of continuous field operation at ~75% rated power on a full tank (31.7 gal / 120 L).
Estimated 75% Load Fuel Burn~4.1 gal/hr (15.4 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Branson 8050 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Branson 8050.
Converted Equivalents:
Horsepower (HP)78 hp
Kilowatts (kW)58.2 kW
Metric Horsepower (PS / CV)79.1 PS
Direct Competitor Comparison
Compare Branson 8050 against same-era industry alternatives in the same horsepower class.
Current Model
Branson
Branson 8050
Engine Power:Diesel (listed): 78 hp / 58.2 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 656
Engine Power:70.9
Production Years:1965 - 1973
Related models
Branson 6530C
- Power:
- 65
- Production years:
- 2005 - 2015
Branson 6530R
- Power:
- 65
- Production years:
- 2005 - 2015
Branson 6640C
- Power:
- 66
- Production years:
- 2012 - 2022
Branson 7845C
- Power:
- 78
- Production years:
- 2016 - 2026
Branson 7845R
- Power:
- 78
- Production years:
- 2016 - 2026
