CaseIH Farmall 30C

The CaseIH Farmall 30C is a tractor produced by Caseih. It is equipped with a 91.3 ci 1.5 L engine. The listed engine power is Diesel (listed): 32.2 hp / 24.0 kW. Transmission: infinite forward and reverse (3-range). Operating weight: 3218 lbs 1459 kg.

Engine Power

Diesel (listed): 32.2 hp / 24.0 kW

Fuel & Capacities

10.5 gal 39.7 L

Transmission

infinite forward and reverse (3-range)

Operating Weight

3218 lbs 1459 kg

Overview

	2014 - 2016 Farmall C SeriesCompact Utility tractor Farmall C Series Compact Utility tractor

Production
Manufacturer	CaseIH
Compact Utility tractor
Original price	$23,986 (2016 shuttle )
	$25,831 (2016 hydro )

CaseIH Farmall 30C Engine
Shibaura 1.5L 3-cyl diesel
Fuel tank	10.5 gal 39.7 L
Engine details ...

CaseIH Farmall 30C Power
Engine	32.2 hp 24.0 kW
Shuttle PTO (claimed)	26 hp 19.4 kW
Hydro PTO (claimed)	24.7 hp 18.4 kW

Mechanical
Four-wheel drive
Power steering
Wet disc brakes
Two-post folding ROPS. Cab optional.

Hydraulics
Type	open center
Valves	1 or 2
Pump flow	7.3 gpm 27.6 lpm

Tractor hitch
Rear Type	I
Control	position control
Rear lift (at ends)	1808 lbs 820 kg
Rear lift (at 24"/610mm)	1433 lbs 650 kg
Rear Arms	telescopic link ends

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540

Dimensions & Tires
Wheelbase	66 inches 167 cm
Weight	3218 lbs 1459 kg
Front tire	7x14
Rear tire	11.2x24
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	85
Battery volts	12

References

Farmall C Series Compact Tractor Specifications published in 2014, by CaseIH

Engine

Engine Detail — 91.3 ci / 1.5 L Diesel

Manufacturer	Shibaura N843T-F-24
Configuration	turbocharged diesel, 3-cylinder, liquid-cooled
Displacement	91.3 ci 1.5 L
Bore/Stroke	3.307x3.543 inches 84 x 90 mm
Emissions	Tier IV
Emission control	exhaust-gas recirculation with diesel particulate filter
Power	32.2 hp 24.0 kW
Fuel system	electronic indirect injection
Air cleaner	dry element
Rated RPM	2600
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed synchronized shuttle
hydrostatic

Transmission — 12 forward and reverse synchronized shuttle

Type	synchronized shuttle
Gears	12 forward and reverse
Four synchronized gears in three non-synchronized ranges with shuttle shift.

Transmission — infinite forward and reverse (3-range) hydrostatic

Type	hydrostatic
Gears	infinite forward and reverse (3-range)

Dimensions

CaseIH Farmall 30C Tires
Standard tires (ag)	Front: 7x14. Rear: 11.2x24
Lawn/turf front	25x8.50-14
Lawn/turf rear	41x14.00-20
Industrial front	25x8.50-14
Industrial rear	43x16.00-20

Dimensions
Wheelbase	66 inches 167 cm
Length	119 inches 302 cm
Width	66.4 inches 168 cm
Height (ROPS)	93.6 inches 237 cm
Weight	3218 lbs 1459 kg
Max weight	4500 lbs 2041 kg
Flange rear axle

Photos

CaseIH Farmall 30C

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 30C based on its 32.2 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)	Medium Duty	Standard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing	5 ft (60 in)1.5 m	Medium Duty	Pasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep	54 to 60 in135 - 150 cm	Medium Duty	Thorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage	5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)	Light Duty	Small acreage soil break-up and secondary aeration.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 30C.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (10.5 gal / 39.7 L).

Estimated 75% Load Fuel Burn~1.7 gal/hr (6.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours