CaseIH Farmall 75C

The CaseIH Farmall 75C is a tractor produced by Caseih. It is equipped with a 195 ci 3.2 L engine. The listed engine power is Diesel (gross): 76 hp / 56.7 kW. Transmission: 16 forward and reverse. Operating weight: 5776 to 6768 pounds.

Engine Power

Diesel (gross): 76 hp / 56.7 kW

Fuel & Capacities

19.8 gal 74.9 L

Transmission

16 forward and reverse

Operating Weight

5776 to 6768 pounds

Overview

	2008 - 2024 Model year 2008-20132014-2024 Farmall C SeriesUtility tractor Farmall C Series Utility tractor

Production
Manufacturer	CaseIH
Utility tractor
Built in Jesi, Italy

Variants
T4030	similar New Holland model

CaseIH Farmall 75C Engine
FPT 3.2L 4-cyl diesel
Fuel tank	19.8 gal 74.9 L
Engine details ...

CaseIH Farmall 75C Power
Engine (gross)	76 hp 56.7 kW
PTO (claimed)	62 hp 46.2 kW
Drawbar (tested)	56.9 hp 42.4 kW
PTO (tested)	66.5 hp 49.6 kW
Performance test details ...

Mechanical
Two- or four-wheel drive
Differential lock	mechanical rear
Steering	hydrostatic power
Hydraulic wet disc brakes
Straddle deck platform with ROPS; cab optional

Hydraulics
Type	open center
Rear valves	1 to 2
Mid valves	0 to 2
Pump flow	12.8 gpm 48.4 lpm
Total flow	20.2 gpm 76.5 lpm
Steering flow	7.4 gpm 28.0 lpm

Tractor hitch
Rear Type	II/I
Rear lift (at 24"/610mm)	3960 lbs 1796 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	mechanical dry disc
Rear PTO Type	540 (1.375)
	540/1000 (1.375)OptOptional
Engine RPM	540@2206

Dimensions & Tires
2WD Wheelbase	85.6 inches 217 cm
4WD Wheelbase	82.6 inches 209 cm
Weight	5776 to 6768 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
Battery CCA	730
Battery volts	12

References

Farmall C Series Tractors published in 2011, by CaseIH
Farmall C Series Tractors published in 2013, by CaseIH
Farmall Series Utility Tractors published in 2008, by CaseIH

Engine

Engine Detail — 195 ci / 3.2 L Diesel

Manufacturer	FPT F5C
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled inline
Displacement	195 ci 3.2 L
Bore/Stroke	3.898x4.094 inches 99 x 104 mm
Emissions	Tier III
Power (gross)	76 hp 56.7 kW
Air cleaner	dual dry elements
Pre-heating	thermostart
Compression	17.5:1
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission options
16-speed mechanical shuttle
16-speed power shuttle

Transmission — 16 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	16 forward and reverse

Transmission — 16 forward and reverse power shuttle

Type	power shuttle
Gears	16 forward and reverse

Dimensions

CaseIH Farmall 75C Tires

Dimensions
2WD Wheelbase	85.6 inches 217 cm
4WD Wheelbase	82.6 inches 209 cm
Height (ROPS)	77.8 inches 197 cm
Height (cab)	91.4 inches 232 cm

CaseIH Farmall 75C Weight
Shipping	5,776 lbs (2WD ROPS) 2619 kg
	6,327 lbs (4WD ROPS) 2869 kg
	6,217 lbs (4WD cab) 2820 kg
	6,768 lbs (4WD cab) 3069 kg

Tests

OCED Tractor Test 2459
Diesel 16-speed 4WD April 2008 - May 2008, Link: OCED Tractor Test 2459 file
PTO performance
Power at rated engine speed	66.5 hp 49.6 kW
Fuel use	4.3 gal/hour 16.3 l/hour
Power at rated PTO speed	65.3 hp 48.7 kW
Fuel use	4.3 gal/hour 16.3 l/hour
Drawbar performance
Max power	56.9 hp 42.4 kW
Fuel use	4.3 gal/hour 16.3 l/hour
Gear 3MH used for power test.
Max pull	7,000 lbs 3175 kg
Gear 1MH used for pull test.

Attachments

Attachment overview
CaseIH L720 loader
CaseIH L730 loader

Photos

CaseIH Farmall 75C tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 75C based on its 76 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 75C.

Estimated Continuous Field Runtime: 5 hrs

Approximately 5 hours of continuous field operation at ~75% rated power on a full tank (19.8 gal / 75 L).

Estimated 75% Load Fuel Burn~4 gal/hr (15 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours