CaseIH Farmall 90

The CaseIH Farmall 90 is a tractor produced by Caseih. It is equipped with a 274 ci 4.5 L engine. The listed engine power is Diesel (gross): 84 hp / 62.6 kW. Transmission: 20 forward and 12 reverse. Operating weight: 5702 to 6915 pounds.

Engine Power

Diesel (gross): 84 hp / 62.6 kW

Fuel & Capacities

23.8 gal 90.1 L

Transmission

20 forward and 12 reverse

Operating Weight

5702 to 6915 pounds

Overview

	2008 - 2010 Farmall Utility SeriesUtility tractorTurk Tractor built Farmall Utility Series Utility tractor Turk Tractor built

Production
Distributor	CaseIH
Manufacturer	Turk Tractor
Utility tractor
Built in Ankara, Turkey

CaseIH Farmall 90 Engine
FPT 4.5L 4-cyl diesel
Fuel tank	23.8 gal 90.1 L
Engine details ...

CaseIH Farmall 90 Power
Engine (gross)	84 hp 62.6 kW
PTO (claimed)	70 hp 52.2 kW
Drawbar (tested)	65.2 hp 48.6 kW
PTO (tested)	73.5 hp 54.8 kW
Performance test details ...

Mechanical
Two- or four-wheel drive
Differential lock	mechanical rear
Power steering
Hydraulic wet disc brakes
Flat deck platform with ROPS. Cab optional.

Hydraulics
Type	open center
Pressure	2755 psi 190.0 bar
Rear valves	1 to 3
Pump flow	13.6 gpm 51.5 lpm
Total flow	21.7 gpm 82.1 lpm
Steering flow	8.1 gpm 30.7 lpm

Tractor hitch
Rear Type	II
Control	position control and mechanical lower-link draft sensing
Rear lift (at 24"/610mm)	5025 lbs 2279 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	mechanical dry clutch
Rear PTO Type	540 (1.375)

Dimensions & Tires
2WD Wheelbase	91 inches 231 cm
4WD Wheelbase	87 inches 220 cm
Weight	5702 to 6915 pounds
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	85
Battery CCA	800
Battery volts	12

References

Farmall Series Utility Tractors published in 2008, by CaseIH

Engine

Engine Detail — 274 ci / 4.5 L Diesel

Manufacturer	FPT
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	274 ci 4.5 L
Bore/Stroke	4.094x5.196 inches 104 x 132 mm
Emissions	Tier 3
Power (gross)	84 hp 62.6 kW
Fuel system	direct injection with mechanical governor
Air cleaner	dual dry elements
Pre-heating	thermostart
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
20-speed mechanical shuttle with creeper

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse
Clutch	mechanical dry disc
Three ranges with four gears per range. Left-hand reverser requires use of clutch to change directions
Transmission
Type	mechanical shuttle with creeper
Gears	20 forward and 12 reverse

Dimensions

CaseIH Farmall 90 Tires

Dimensions
2WD Wheelbase	91 inches 231 cm
4WD Wheelbase	87 inches 220 cm
Height (ROPS)	101.1 inches 256 cm
Height (cab)	103.1 inches 261 cm

CaseIH Farmall 90 Weight
Shipping	5,702 lbs (2WD ROPS) 2586 kg
	6,254 lbs (4WD ROPS) 2836 kg
	6,363 lbs (2WD cab) 2886 kg
	6,915 lbs (4WD cab) 3136 kg

Tests

OCED Tractor Test 2509
Diesel 12-speed 4WD December 2008 - 2008, Link: OCED Tractor Test 2509 file
PTO performance
Max power	73.5 hp 54.8 kW
Fuel use	4.7 gal/hour 17.8 l/hour
Power at rated engine speed	72.7 hp 54.2 kW
Fuel use	4.7 gal/hour 17.8 l/hour
Power at rated PTO speed	70.3 hp 52.4 kW
Fuel use	4.4 gal/hour 16.7 l/hour
Drawbar performance
Max power	65.2 hp 48.6 kW
Fuel use	4.5 gal/hour 17.0 l/hour
Max pull	7,265 lbs 3295 kg

Photos

CaseIH Farmall 90

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 90 based on its 84 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 90.

Estimated Continuous Field Runtime: 5.4 hrs

Approximately 5.4 hours of continuous field operation at ~75% rated power on a full tank (23.8 gal / 90.1 L).

Estimated 75% Load Fuel Burn~4.4 gal/hr (16.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours