CaseIH Magnum 250

The CaseIH Magnum 250 is a tractor produced by Caseih. It is equipped with a 531 ci 8.7 L engine. The listed engine power is Diesel (gross): 250 hp / 186.4 kW. Transmission: infinite forward and reverse (2-range). Operating weight: 28600 lbs 12972 kg.

Engine Power

Diesel (gross): 250 hp / 186.4 kW

Fuel & Capacities

179 gal (power shift) 677.5 L

Transmission

infinite forward and reverse (2-range)

Operating Weight

28600 lbs 12972 kg

Overview

	2014 - 2025 Model year 2014-20192019-2025 Magnum SeriesRow-Crop tractor Magnum Series Row-Crop tractor

Production
Manufacturer	CaseIH (a part of CNH)
Row-Crop tractor
Built in Racine, Wisconsin, USA
Original price	$234,323 (2014 Power Shift )
	$ (2014 247,665 CVT )

Variants
T8.320	similar New Holland model

CaseIH Magnum 250 Engine
FPT 8.7L 6-cyl diesel
Fuel tank	179 gal (power shift) 677.5 L
	163 gal (CVT) 617.0 L
Exhaust fluid (DEF)	26 gal 98.4 L
Engine details ...

CaseIH Magnum 250 Power
Engine (gross)	250 hp 186.4 kW
Engine (max)	285 hp 212.5 kW
PTO (claimed)	205 hp 152.9 kW
Drawbar (tested)	183.85 hp 137.1 kW
PTO (tested)	261.49 hp 195.0 kW
Performance test details ...

Mechanical
Four-wheel drive
Final drives	inboard planetary
Power steering
Wet disc brakes
Cab standard with air-conditioning. AFS ready

Hydraulics
Type	variable displacement pressure-flow compensating (PFC)
Valves	4 to 6
Pump flow	44 gpm 166.5 lpm
	59 gpm (optional) 223.3 lpm
	75 gpm (optional) 283.9 lpm

Tractor hitch
Rear Type	III/IIIN
Control	electronic lower link draft sensing
Rear lift (at 24"/610mm)	12900 lbs 5851 kg
	14900 lbs (optional) 6758 kg
Rear Arms	Adjustable quick coupler
Drawbar	Cat. 3
	Cat. 4 (optional)

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	1000 (1.75)
	540/1000 (1.375)OptOptional
Engine RPM	540@1800
	1000@1800

Dimensions & Tires
Wheelbase	120 inches 304 cm
	122 inches (CVT) 309 cm
Weight	28600 lbs 12972 kg
Front tire	420/8R34
Rear tire	480/80R50 (duals)
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	200
Batteries	2
Battery volts	12

References

Magnum 180-380 Tractors published in 2014, by CaseIH
Magnum 250-380 HP Tractors published in 2016, by CaseIH
Magnum Series Tractors published in 2019, by CaseIH

Engine

Engine Detail — 531 ci / 8.7 L Diesel

Manufacturer	FPT
Configuration	wastegate turbocharger diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	531 ci 8.7 L
Bore/Stroke	4.606x5.315 inches 117 x 135 mm
Emissions	Tier IV
Emission control	selective catalytic reduction (SCR)
Rated Power (gross)	250 hp 186.4 kW
Maximum Power (gross)	285 hp 212.5 kW
	320 hp (boost) 238.6 kW
Fuel system	electronic high pressure common rail direct injection
Cooling system	BorgWarner Visctronic fan
Rated RPM	2000
Starter	electric
Starter volts	12

CaseIH Magnum 250 Engine

Transmission

Transmission options
19-speed full power shift
18-speed full power shift
continuously variable transmission (CVT)

Transmission — 19 forward and 4 reverse full power shift

Type	full power shift
Gears	19 forward and 4 reverse

Transmission — 18 forward and 4 reverse full power shift

Type	full power shift
Gears	18 forward and 4 reverse

Transmission — infinite forward and reverse (2-range) continuously variable transmission (CVT)

Type	continuously variable transmission (CVT)
Gears	infinite forward and reverse (2-range)

CaseIH Magnum 250 Transmission

Dimensions

CaseIH Magnum 250 Tires
Standard tires (ag)	Front: 420/8R34. Rear: 480/80R50 (duals)

Dimensions
Wheelbase	120 inches 304 cm
	122 inches (CVT) 309 cm
Length	247 inches 627 cm
Width	120 inches 304 cm
Height (cab)	131.5 inches 334 cm
Weight	28600 lbs 12972 kg
Max weight	32500 lbs 14742 kg
Front axle	4WD
Front axle	Suspended 4WD
Bar rear axle	4.0 by 120 inches 101 by 3048 mm
Bar rear axle	4.5 by 120 inches 114 by 3048 mm (optional)

Tests

OCED Tractor Test 2122A
Diesel 18-speed 4WD September 1 - 17, 2015 Link: OCED Tractor Test 2122A file
PTO performance
Max power	261.49 hp 195.0 kW
Fuel use	13.5 gal/hour 51.1 l/hour
Power at rated engine speed	215.51 hp 160.7 kW
Fuel use	11.9 gal/hour 45.0 l/hour
Power at rated PTO speed	261.49 hp 195.0 kW
Fuel use	13.5 gal/hour 51.1 l/hour
Drawbar performance
Max power	183.85 hp 137.1 kW
Fuel use	11.7 gal/hour 44.3 l/hour
Gear 8 used for power test.
Max pull	20729 lbs 9402 kg
Gear 4 used for pull test.

Photos

Case IH Magnum 250 CVT

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Magnum 250 based on its 250 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Magnum 250.

Estimated Continuous Field Runtime: 13.8 hrs

Approximately 13.8 hours of continuous field operation at ~75% rated power on a full tank (179 gal / 677.6 L).

Estimated 75% Load Fuel Burn~13 gal/hr (49.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours