CaseIH Magnum 275

The CaseIH Magnum 275 is a tractor produced by Caseih. It is equipped with a 540 ci 8.9 L engine. The listed engine power is Diesel (listed): 275 hp / 205.1 kW. Transmission: 23 forward and 6 reverse. Operating weight: 20630 to 21570 pounds.

Engine Power

Diesel (listed): 275 hp / 205.1 kW

Fuel & Capacities

180 gal 681.3 L

Transmission

23 forward and 6 reverse

Operating Weight

20630 to 21570 pounds

Overview

	2007 - 2011 Magnum SeriesRow-Crop tractor Magnum Series Row-Crop tractor

Production
Manufacturer	CaseIH
Row-Crop tractor
Built in Racine, Wisconsin, USA
Original price was $197,933 in 2010

CaseIH Magnum 275 Power
Engine	275 hp 205.1 kW
PTO (claimed)	225 hp 167.8 kW
Drawbar (tested)	195.02 hp 145.4 kW
PTO (tested)	271.58 hp 202.5 kW
Performance test details ...

Mechanical
Four-wheel drive
Power steering
Differential hydraulic wet disc brakes
Cab standard with heat and air-conditioning. Optional luxury cab with red or grey leather seat, tinted rear window, and leather-wrapped controls.

Capacity
Fuel	180 gal 681.3 L
Hydraulic system	45.5 gal 172.2 L

Hydraulics
Type	PFC
Capacity	45.5 gal 172.2 L
Valves	3 to 5
Total flow	44 gpm 166.5 lpm
	59 gpm (optional) 223.3 lpm
	75 gpm (optional Twin-Flow) 283.9 lpm

Tractor hitch
Rear Type	III/IIIN
	IVN/III OptOptional
Rear lift	14070 lbs 6382 kg
	16375 lbsOptOptional 7427 kg
	18900 lbsOptOptional 8573 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	1000
	540/1000 OptOptional

Dimensions & Tires
Wheelbase	118.3 inches 300 cm
Weight	20630 to 21570 pounds
Front tire	380/85R34
Rear tire	480/80R46
Full dimensions and tires ...

References

Magnum Series Tractors published in 2007, by CaseIH

Engine

Engine options
CNH 8.3L 6-cyl diesel
CNH 8.9L 6-cyl diesel

Engine Detail — 504.5 ci / 8.3 L Diesel

Manufacturer	CNH
Configuration	turbocharged intercooled diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	504.5 ci 8.3 L
Bore/Stroke	4.488x5.315 inches 114 x 135 mm
Power	275 hp 205.1 kW
Air cleaner	dual paper elements
Compression	17.5:1
Rated RPM	2000
Starter volts	12
Oil capacity	22 qts 20.8 L
Coolant capacity	26 qts 24.6 L

Engine Detail — 540 ci / 8.9 L Diesel

Manufacturer	CNH
Configuration	turbocharged intercooled diesel, 6-cylinder, liquid-cooled
The 9L engine was introduced on the Magnum 275 for the 2008 model year, serial number 5000.
Displacement	540 ci 8.9 L
Bore/Stroke	4.488x5.689 inches 114 x 145 mm
Air cleaner	dual paper elements with aspirator
Compression	17.6:1
Rated RPM	2000
Starter volts	12

Transmission

Transmission options
18-speed full powershift
19-speed full powershift
23-speed full powershift

Transmission — 18 forward and 4 reverse full powershift

Type	full powershift
Gears	18 forward and 4 reverse

Transmission — 19 forward and 4 reverse full powershift

Type	full powershift
Gears	19 forward and 4 reverse

Transmission — 23 forward and 6 reverse full powershift

Type	full powershift
Gears	23 forward and 6 reverse

Dimensions

CaseIH Magnum 275 Tires
Ag front	380/85R34
Ag rear	480/80R46

Dimensions
Wheelbase	118.3 inches 300 cm
Height (cab)	128.5 inches 326 cm
Rear axle	4 by 120 inches 101 by 3048 mm
Rear axle	4.5 by 120 inches 114 by 3048 mm

CaseIH Magnum 275 Weight
Shipping	20,630 lbs 9357 kg
	21,430 lbs (suspended front axle) 9720 kg
Operating	21,570 lbs 9784 kg
Ballasted	30,280 lbs 13735 kg
Max capacity	32,500 lbs 14742 kg

Tests

Tractor Tests
OECD 1912: 8.3L diesel 19-speed 4WD
OECD 1916: 9L diesel 19-speed 4WD

OCED Tractor Test 1912
8.3L diesel 19-speed 4WD October 30 - November 14, 2007 Link: OCED Tractor Test 1912 file
PTO performance
Max power	268.64 hp 200.3 kW
Fuel use	15.2 gal/hour 57.5 l/hour
Power at rated engine speed	227.00 hp 169.3 kW
Fuel use	14.3 gal/hour 54.1 l/hour
Power at rated PTO speed	267.97 hp 199.8 kW
Fuel use	15.3 gal/hour 57.9 l/hour
Drawbar performance
Max power	192.12 hp 143.3 kW
Fuel use	14.2 gal/hour 53.7 l/hour
Gear 9 used for power test.

OCED Tractor Test 1916
9L diesel 19-speed 4WD November 6 - 14, 2007 Link: OCED Tractor Test 1916 file
PTO performance
Max power	271.58 hp 202.5 kW
Fuel use	15.2 gal/hour 57.5 l/hour
Power at rated engine speed	229.22 hp 170.9 kW
Fuel use	13.9 gal/hour 52.6 l/hour
Power at rated PTO speed	271.30 hp 202.3 kW
Fuel use	0.2 gal/hour 0.8 l/hour
Drawbar performance
Max power	195.02 hp 145.4 kW
Fuel use	13.9 gal/hour 52.6 l/hour
Gear 9 used for power test.
Max pull	30,422 lbs 13799 kg
Gear 3 used for pull test.

Photos

CaseIH Magnum 275

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Magnum 275 based on its 275 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Magnum 275.

Estimated Continuous Field Runtime: 12.6 hrs

Approximately 12.6 hours of continuous field operation at ~75% rated power on a full tank (180 gal / 681.4 L).

Estimated 75% Load Fuel Burn~14.3 gal/hr (54.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours