CaseIH Puma 140
The CaseIH Puma 140 is a tractor produced by Caseih. It is equipped with a 411 ci 6.7 L engine. The listed engine power is Diesel (gross): 140 hp / 104.4 kW. Transmission: powershift with EconoGear. Operating weight: 13230 to 13725 pounds.
Engine Power
Diesel (gross): 140 hp / 104.4 kW
Fuel & Capacities
79 gal*Prior to 2010
299.0 L
Transmission
powershift with EconoGear
Operating Weight
13,725 lbs
6225 kg
Overview
 | 2008 - 2011
Puma SeriesUtility tractor
Puma Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | CaseIH |
Utility tractor | |
Built in Basildon, England | |
Original price was $105,788 in 2010 | |
CaseIH Puma 140 Engine | |
|---|---|
CNH 6.7L 6-cyl diesel | |
Engine details ...  |
CaseIH Puma 140 Power | |
|---|---|
Engine (gross) | 140 hp
104.4 kW |
PTO (claimed) | 120 hp
89.5 kW |
Drawbar (tested) | 99.9 hp
74.5 kW |
PTO (tested) | 137.5 hp
102.5 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Differential hydraulic wet disc brakes | |
Trailer brakes | hydraulic optional |
Cab standard with air-conditioning. Optional suspended cab. | |
Capacity | |
|---|---|
Fuel | 79 gal*Prior to 2010
299.0 L |
75 gal*After 2010
283.9 L | |
Hydraulic system | 19.6 gal
74.2 L |
Hydraulics | |
|---|---|
Type | closed center pressure flow compensated (PFC) |
Capacity | 19.6 gal
74.2 L |
Valves | 2 to 4 |
Pump flow | 26.5 gpm
100.3 lpm |
Total flow | 43.7 gpm
165.4 lpm |
Steering flow | 17 gpm
64.3 lpm |
Tractor hitch | |
|---|---|
Rear Type | 2/3N |
Control | electronic draft control |
Rear lift | 12,185 lbs
5527 kg |
15,197 lbs (100mm cylinders)
6893 kg | |
Rear Arms | flexible link ends with telescopic stabilizer |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Dimensions & Tires | |
|---|---|
Wheelbase | 107.8 inches
273 cm |
109.7 inches (suspended front axle)
278 cm | |
Weight | 13230 to 13725 pounds |
Front tire | 14.9R28 |
Rear tire | 18.4R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 120 *Prior to 2010 |
150 *After 2010 | |
200 *Optional after 2010 | |
Battery CCA | 960 |
Battery volts | 12 |
Engine
Engine Detail — 411 ci / 6.7 L Diesel
Manufacturer | CNH |
Configuration | turbocharged air-to-air aftercooled diesel, 6-cylinder 24-valve, liquid-cooled inline |
Displacement | 411 ci
6.7 L |
Bore/Stroke | 4.094x5.197 inches
104 x 132 mm |
Emissions | Tier 3 |
Power (gross) | 140 hp
104.4 kW |
Fuel system | electronic high-pressure common rail |
Cooling system | viscous fan |
Air cleaner | dual paper elements |
Compression | 17.5:1 |
Rated RPM | 2200 |
Starter volts | 12 |
Oil capacity | 16 qts
15.1 L |
Transmission
Transmission options | |
|---|---|
18-speed partial power shift | |
19-speed |
Transmission — 18 forward and 6 reverse partial power shift
Type | partial power shift |
Gears | 18 forward and 6 reverse |
Clutch | hydraulic wet disc |
Six power-shift gears in three ranges. | |
 | |
Transmission — powershift with EconoGear
Transmission | powershift with EconoGear |
Gears | 19 forward and 6 reverse |
Dimensions
CaseIH Puma 140 Tires | |
|---|---|
Standard tires (ag) | Front: 14.9R28. Rear: 18.4R38 |
Dimensions | |
|---|---|
Wheelbase | 107.8 inches
273 cm |
109.7 inches (suspended front axle)
278 cm | |
Height (cab) | 118.3 inches
300 cm |
Shipping weight | 13,230 lbs
6001 kg |
Operating weight | 13,725 lbs
6225 kg |
Flange rear axle | |
Bar rear axle | 3.625 by 98 inches
92 by 2489 mm |
Bar rear axle | 3.625 by 112 inches
92 by 2844 mm |
Front tread | 61.8 to 89.2 inches
156 to 226 cm |
Tests
OCED Tractor Test 2495 | |
|---|---|
Diesel 18-speed 4WD
September 2008 - January 2009,
Link: OCED Tractor Test 2495 file | |
PTO performance | |
Max power | 137.5 hp
102.5 kW |
Fuel use | 7.6 gal/hour
28.8 l/hour |
Power at rated engine speed | 121.5 hp
90.6 kW |
Fuel use | 7.6 gal/hour
28.8 l/hour |
Power at rated PTO speed | 125.4 hp
93.5 kW |
Fuel use | 7.8 gal/hour
29.5 l/hour |
Drawbar performance | |
Max power | 99.9 hp
74.5 kW |
Fuel use | 7.5 gal/hour
28.4 l/hour |
Gear 3-Medium used for power test. | |
Max pull | 12,915 lbs
5858 kg |
Gear 1-Low used for pull test. | |
Photos
CaseIH Puma 140
Recommended Implements & Sizing Guide
Engineering recommendations for Caseih Puma 140 based on its 140 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Puma 140.
Estimated Continuous Field Runtime: 10.9 hrs
Approximately 10.9 hours of continuous field operation at ~75% rated power on a full tank (79 gal / 299 L).
Estimated 75% Load Fuel Burn~7.3 gal/hr (27.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Caseih Puma 140 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Caseih Puma 140.
Converted Equivalents:
Horsepower (HP)140 hp
Kilowatts (kW)104.4 kW
Metric Horsepower (PS / CV)141.9 PS
Direct Competitor Comparison
Compare CaseIH Puma 140 against same-era industry alternatives in the same horsepower class.
Current Model
Caseih
CaseIH Puma 140
Engine Power:Diesel (gross): 140 hp / 104.4 kW
★ Baseline Reference
Related models
CaseIH 1694
- Power:
- 112
- Production years:
- 1985 - 1988
CaseIH Farmall 105A
- Power:
- 112
- Production years:
- 2020 - 2026
CaseIH CS 120
- Power:
- 113.4
- Production years:
- 1997 - 2003
CaseIH Farmall 115C
- Power:
- 115
- Production years:
- 2013 - 2015
CaseIH Farmall 115U
- Power:
- 115
- Production years:
- 2013 - 2016