CaseIH Farmall 115U

The CaseIH Farmall 115U is a tractor produced by Caseih. It is equipped with a 207.5 ci 3.4 L engine. The listed engine power is Diesel (gross): 115 hp / 85.8 kW. Transmission: 24 forward and reverse. Operating weight: 9370 lbs 4250 kg.

Engine Power

Diesel (gross): 115 hp / 85.8 kW

Fuel & Capacities

37 gal 140.0 L

Transmission

24 forward and reverse

Operating Weight

9370 lbs 4250 kg

Overview

	2013 - 2016 Farmall U SeriesUtility tractor Farmall U Series Utility tractor

Production
Manufacturer	CaseIH
Utility tractor
Built in Italy
Original price was $90,922 in 2015

Variants
T5.115	similar New Holland model

CaseIH Farmall 115U Engine
FPT 3.4L 4-cyl diesel
Fuel tank	37 gal 140.0 L
Engine details ...

CaseIH Farmall 115U Power
Engine (gross)	115 hp 85.8 kW
PTO (claimed)	98 hp 73.1 kW
Drawbar (tested)	73.0 hp 54.4 kW
PTO (tested)	104.7 hp 78.1 kW
Performance test details ...

Mechanical
Four-wheel drive
Final drives	inboard planetary
Power steering
Hydraulic wet disc brakes
Cab with air-conditioning.

Hydraulics
Type	open center
Valves	2 to 3
Pump flow	16.1 gpm 60.9 lpm
	21.1 gpmOptOptional 79.9 lpm
Steering flow	10 gpm 37.9 lpm
	11.4 gpmOptOptional 43.1 lpm

Tractor hitch
Rear Type	II
Control	electronic draft control
Rear lift (at ends)	adjustable lbs 0 kg
Rear lift (at 24"/610mm)	6393 lbs 2899 kg
	11949 lbsOptOptional 5420 kg
Drawbar	Cat. II, swinging

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
	540E OptOptional

Dimensions & Tires
Wheelbase	92.5 inches 234 cm
Weight	9370 lbs 4250 kg
Front tire	14.9R24
Rear tire	18.4R34
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
Battery volts	12

References

Farmall U Series Utility Tractors published in 2013, by CaseIH

Engine

Engine Detail — 207.5 ci / 3.4 L Diesel

Manufacturer	FPT
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	207.5 ci 3.4 L
Bore/Stroke	3.898x4.331 inches 99 x 110 mm
Emissions	Interim Tier IV
Power (gross)	115 hp 85.8 kW
Fuel system	electronic high-pressure common rail
Pre-heating	glow plugs
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed power shuttle
20-speed creeper power shuttle
24-speed two-speed power shift

Transmission — 12 forward and reverse power shuttle

Type	power shuttle
Gears	12 forward and reverse
Clutch	wet disc
Four synchronized gears in three non-synchronized ranges.

Transmission — 20 forward and reverse creeper power shuttle

Type	creeper power shuttle
Gears	20 forward and reverse
Clutch	hydraulic wet disc

Transmission — 24 forward and reverse two-speed power shift

Type	two-speed power shift
Gears	24 forward and reverse
Clutch	hydraulic wet disc
Four synchronized gears in three non-synchronized ranges with a push-button two-speed high/low power shift in each gear. Power shuttle.

Dimensions

CaseIH Farmall 115U Tires
Standard tires (ag)	Front: 14.9R24. Rear: 18.4R34

Dimensions
Wheelbase	92.5 inches 234 cm
Length	164 inches 416 cm
Width	83 inches*Width across fenders. 210 cm
Height (cab)	103 inches 261 cm
Shipping weight	9370 lbs 4250 kg
Max weight	11133 lbs 5049 kg
Flange rear axle

Tests

OCED Tractor Test 2803
Diesel 24-speed 4WD March 2013 - July 2013, Link: OCED Tractor Test 2803 file
PTO performance
Max power	104.7 hp 78.1 kW
Fuel use	6.1 gal/hour 23.1 l/hour
Power at rated engine speed	103.0 hp 76.8 kW
Fuel use	6.4 gal/hour 24.2 l/hour
Power at rated PTO speed	104.7 hp 78.1 kW
Fuel use	6.1 gal/hour 23.1 l/hour
Drawbar performance
Max power	73.0 hp 54.4 kW
Fuel use	6.5 gal/hour 24.6 l/hour
Gear 2MH used for power test.
Max pull	8230 lbs 3733 kg
Gear 2ML used for pull test.

Attachments

Attachment overview
Case IH L735 loader
Case IH L745 loader

Photos

CaseIH Farmall 115U

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 115U based on its 115 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 115U.

Estimated Continuous Field Runtime: 6.2 hrs

Approximately 6.2 hours of continuous field operation at ~75% rated power on a full tank (37 gal / 140.1 L).

Estimated 75% Load Fuel Burn~6 gal/hr (22.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours