CaseIH Farmall 115C

The CaseIH Farmall 115C is a tractor produced by Caseih. It is equipped with a 207 ci 3.4 L engine. The listed engine power is Diesel (listed): 115 hp / 85.8 kW. Transmission: 20 forward and 12 reverse. Operating weight: 7937 lbs 3600 kg.

Engine Power

Diesel (listed): 115 hp / 85.8 kW

Fuel & Capacities

30.3 gal 114.7 L

Transmission

20 forward and 12 reverse

Operating Weight

7937 lbs 3600 kg

Overview

	2013 - 2015 Farmall C SeriesUtility tractor Farmall C Series Utility tractor

Production
Manufacturer	CaseIH
Utility tractor

CaseIH Farmall 115C Engine
Fiat Powertrain Technologies (FPT) 3.4L 4-cyl diesel
Fuel tank	30.3 gal 114.7 L
Engine details ...

CaseIH Farmall 115C Power
Engine	115 hp 85.8 kW
PTO (claimed)	98 hp 73.1 kW
Drawbar (tested)	69.3 hp 51.7 kW
PTO (tested)	103.7 hp 77.3 kW
Performance test details ...

Mechanical
Two- or four-wheel drive
Final drives	inboard planetary
Differential lock	mechanical rear
Power steering
ROPS Brakes	mechanical wet disc
Cab Brakes	hydraulic wet disc
Two-post foldable ROPS. Cab optional with heat and air-conditioning.

Hydraulics
Type	open center
Valves	1 or 2
Pump flow	12.9 gpm 48.8 lpm
	16.9 gpmOptOptional 64.0 lpm

Tractor hitch
Rear Type	II
Control	mechanical upper-link draft sensing
Rear lift (at 24"/610mm)	5620 lbs 2549 kg
Drawbar	swinging drawbar

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)
	540/1000 OptOptional

Dimensions & Tires
4WD Wheelbase	89 inches 226 cm
Weight	7937 lbs 3600 kg
Rear tire	16.9R34
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	120
ROPS Battery CCA	730
Cab Battery CCA	800
Battery volts	121

References

Farmall C Series Tractors published in 2013, by CaseIH

Engine

Engine Detail — 207 ci / 3.4 L Diesel

Configuration	turbocharged air-to-air aftercooled diesel, 4-cylinder, liquid-cooled
Fiat Powertrain Technologies (FPT) F5H
Displacement	207 ci 3.4 L
Bore/Stroke	3.90x4.33 inches 99 x 110 mm
Emissions	Interim Tier 4
Emission control	cooled exhaust-gas recirculation (EGR)
Power	115 hp 85.8 kW
Fuel system	electronic high-pressure common rail direct injection
Air cleaner	dual dry element
Pre-heating	grid heater
Rated RPM	2300
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
12-speed power shuttle
20-speed creeper

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse
Four synhronized gears in three non-synchronized ranges. Mechanical shuttle shifting.

Transmission — 12 forward and reverse power shuttle

Type	power shuttle
Gears	12 forward and reverse
Four synhronized gears in three non-synchronized ranges. Power shuttle shifting.

Transmission — 20 forward and 12 reverse creeper

Type	creeper
Gears	20 forward and 12 reverse
Additional creeper range added to the shuttle transmission.

Dimensions

CaseIH Farmall 115C Tires
Ag rear	16.9R34

Dimensions
4WD Wheelbase	89 inches 226 cm
Length	149 inches 378 cm
Width	83 inches 210 cm
Height (ROPS)	103 inches 261 cm
Height (cab)	100 inches 254 cm
4WD Cab Weight	7937 lbs 3600 kg
Flange axle rear axle
2WD Front tread	60.2 to 79.9 inches 152 to 202 cm
4WD Front tread	60.8 to 76.6 inches 154 to 194 cm
Rear tread	52.2 to 76.6 inches 132 to 194 cm

Tests

OCED Tractor Test 2839
Diesel 12-speed 4WD Cab March 2014 - April 2014, Link: OCED Tractor Test 2839 file
PTO performance
Max power	103.7 hp 77.3 kW
Fuel use	5.9 gal/hour 22.3 l/hour
Power at rated engine speed	98.7 hp 73.6 kW
Fuel use	6.2 gal/hour 23.5 l/hour
Power at rated PTO speed	100.4 hp 74.9 kW
Fuel use	6.1 gal/hour 23.1 l/hour
Drawbar performance
Max power	69.3 hp 51.7 kW
Fuel use	5.6 gal/hour 21.2 l/hour
Gear 3M used for power test.
Max pull	6775 lbs 3073 kg
Gear 2M used for pull test.

Attachments

Attachment overview
Case IH L735 NSL loader
Case IH L735 MSL loader

Photos

Two-wheel drive Case IH Farmall 115C with L735 front-end loader.

Four-wheel drive Case IH Farmall 115C with L630 front-end loader.

Case IH Farmall 115C baling straw, right side.

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Farmall 115C based on its 115 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Farmall 115C.

Estimated Continuous Field Runtime: 5.1 hrs

Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (30.3 gal / 114.7 L).

Estimated 75% Load Fuel Burn~6 gal/hr (22.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours