CaseIH Puma 140 X
The CaseIH Puma 140 X is a tractor produced by Caseih. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Diesel (gross): 140 hp / 104.4 kW. Transmission: 19 forward and 6 reverse.
Engine Power
Diesel (gross): 140 hp / 104.4 kW
Fuel & Capacities
87.2 gal
330.1 L
Transmission
19 forward and 6 reverse
Overview
 | 2018 -
Puma SeriesRow-Crop tractor |
|---|---|
2018 - | |
Puma Series | |
Row-Crop tractor | |
Production | |
|---|---|
Manufacturer | CaseIH |
Row-Crop tractor | |
Built in St. Valentin, Austria | |
CaseIH Puma 140 X Engine | |
|---|---|
FPT 6.7L 6-cyl diesel | |
Fuel tank | 87.2 gal
330.1 L |
Exhaust fluid (DEF) | 12.7 gal
48.1 L |
Engine details ...  | |
CaseIH Puma 140 X Power | |
|---|---|
Engine (gross) | 140 hp
104.4 kW |
Engine (max) | 155 hp
115.6 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | rear standard |
Power steering | |
Hydraulic wet disc brakes | |
Trailer brakes | hydraulic |
pneumatic OptOptional | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | pressure flow compensated |
Pressure | 3045 psi
210.0 bar |
Rear valves | 4 |
Mid valves | 3 |
Pump flow | 29.1 gpm
110.1 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Control | electronic draft control |
Rear lift (at 24"/610mm) | 14586 lbs
6616 kg |
Front lift | 7873 lbs
3571 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E/1000 (1.375) |
540/1000/1000E (1.375) | |
Engine RPM | 540@1969 |
540E@1546 | |
1000@1893 | |
1000E@1621 | |
Front PTO Type | 1000 |
Engine RPM | 1000@1895 |
Dimensions & Tires | |
|---|---|
Front tire | 380/85R28 |
Rear tire | 460/85R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 120 |
200 OptOptional | |
Battery volts | 12 |
Engine
Engine Detail — 410.6 ci / 6.7 L Diesel
Manufacturer | FPT |
Configuration | turbocharged intercooled diesel, 6-cylinder 24-valve, liquid-cooled |
Displacement | 410.6 ci
6.7 L |
Bore/Stroke | 4.09x5.20 inches
104 x 132 mm |
Emissions | Stage IV |
Rated Power (gross) | 140 hp
104.4 kW |
Maximum Power (gross) | 155 hp
115.6 kW |
Rated RPM | 2200 |
Torque | 483 lb-ft
654.9 Nm |
Torque RPM | 1500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
18-speed partial power shift | |
19-speed partial power shift |
Transmission — 18 forward and 6 reverse partial power shift
Type | partial power shift |
Gears | 18 forward and 6 reverse |
Transmission — 19 forward and 6 reverse partial power shift
Type | partial power shift |
Gears | 19 forward and 6 reverse |
Dimensions
CaseIH Puma 140 X Tires | |
|---|---|
Standard tires (ag) | Front: 380/85R28. Rear: 460/85R38 |
Dimensions | |
|---|---|
Flange rear axle | |
Bar rear axle | 98 inch length
2489 mmOptOptional |
Photos
CaseIH Puma 140 X tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Caseih Puma 140 X based on its 140 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Puma 140 X.
Estimated Continuous Field Runtime: 12 hrs
Approximately 12 hours of continuous field operation at ~75% rated power on a full tank (87.2 gal / 330.1 L).
Estimated 75% Load Fuel Burn~7.3 gal/hr (27.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Caseih Puma 140 X Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Caseih Puma 140 X.
Converted Equivalents:
Horsepower (HP)140 hp
Kilowatts (kW)104.4 kW
Metric Horsepower (PS / CV)141.9 PS
Direct Competitor Comparison
Compare CaseIH Puma 140 X against same-era industry alternatives in the same horsepower class.
Current Model
Caseih
CaseIH Puma 140 X
Engine Power:Diesel (gross): 140 hp / 104.4 kW
★ Baseline Reference
Related models
CaseIH 1694
- Power:
- 112
- Production years:
- 1985 - 1988
CaseIH Farmall 105A
- Power:
- 112
- Production years:
- 2020 - 2026
CaseIH CS 120
- Power:
- 113.4
- Production years:
- 1997 - 2003
CaseIH Farmall 115C
- Power:
- 115
- Production years:
- 2013 - 2015
CaseIH Farmall 115U
- Power:
- 115
- Production years:
- 2013 - 2016