CaseIH Steiger 435QT Quadtrac

The CaseIH Steiger 435QT Quadtrac is a tractor produced by Caseih. It is equipped with a 787 ci 12.9 L engine. The listed engine power is Diesel (listed): 435 hp / 324.4 kW. Transmission: powershift. Drive type: articulated crawler. Operating weight: 48,150 lbs 21840 kg.

Engine Power

Diesel (listed): 435 hp / 324.4 kW

Drive & Traction

articulated crawler

Fuel & Capacities

300 gal 1135.5 L

Transmission

powershift

Operating Weight

48,150 lbs 21840 kg

Overview

	2008 - 2010

Production
Manufacturer	CaseIH
Built in Fargo, North Dakota, USA
Original price	$336,979 (2010)

Variants
435	wheeled tractor

CaseIH Steiger 435QT Engine
Iveco 12.9L 6-cyl diesel
Fuel tank	300 gal 1135.5 L
Engine details ...

CaseIH Steiger 435QT Transmission
16-speed
Transmission details ...

CaseIH Steiger 435QT Power
Engine	435 hp 324.4 kW
PTO (claimed)	379 hp 282.6 kW

Mechanical
Drive	articulated crawler
Steering	hydrostatic power
Integrated hydraulic wet disc brakes
Cab standard with heat and A/C, optional Luxury cab

Hydraulics
Valves	4 to 5
	4 to 9 (without 3-point hitch)
Total flow	40 gpm 151.4 lpm
	55 gpm (High-Flow) 208.2 lpm
	90 gpm (Twin-Flow) 340.7 lpm

Tractor hitch
Rear Type	4N
Rear lift (at 24"/610mm)	19,728 lbs 8948 kg

Power Take-off (PTO)
Rear PTO	independent optional
Rear PTO Type	1000

Dimensions & Tracks
Wheelbase	154 inches 391 cm
Weight	48,150 lbs 21840 kg
30-inch tracks
Full dimensions and tracks ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	175
Batteries	2
Battery CCA	1000
Battery volts	12

References

Steiger Series Tractors published in 2007, by CaseIH

Engine

Engine Detail — 787 ci / 12.9 L Diesel

Manufacturer	Iveco
Configuration	turbocharged diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	787 ci 12.9 L
Bore/Stroke	5.314x5.906 inches 135 x 150 mm
Emissions	Tier 3
Power	435 hp 324.4 kW
Maximum Power	478 hp 356.4 kW
Air cleaner	dual paper elements
Compression	16.5:1
Rated RPM	2000
Starter volts	24
Oil capacity	32.8 qts 31.0 L

Transmission

Transmission — powershift

Transmission	powershift
Gears	16 forward and 2 reverse

Dimensions

CaseIH Steiger 435QT Tracks
Width	30 inches 76 cm
Width	36 inches 91 cm

Dimensions
Wheelbase	154 inches 391 cm
Width	44 inches (frame) 111 cm
Shipping weight	48,150 lbs 21840 kg
Max weight	58,000 lbs 26308 kg

Photos

CaseIH Steiger 435QT Quadtrac tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Caseih Steiger 435QT Quadtrac based on its 435 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih Steiger 435QT Quadtrac.

Estimated Continuous Field Runtime: 13.3 hrs

Approximately 13.3 hours of continuous field operation at ~75% rated power on a full tank (300 gal / 1135.6 L).

Estimated 75% Load Fuel Burn~22.6 gal/hr (85.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours