Challenger MT295B
The Challenger MT295B is a tractor produced by Challenger. It is equipped with a 180.3 ci 3.0 L engine. The listed engine power is Diesel (net): 50 hp / 37.3 kW; Diesel (gross): 52.1 hp / 38.9 kW. Transmission: AutoPower IV. Operating weight: 3726 lbs 1690 kg.
Engine Power
Diesel (net): 50 hp / 37.3 kW; Diesel (gross): 52.1 hp / 38.9 kW
Fuel & Capacities
13.2 gal
50.0 L
Transmission
AutoPower IV
Operating Weight
3726 lbs
1690 kg
Overview
![]() | 2005 - 2008
MT200B SeriesCompact Utility tractorIseki built
MT200B Series
Compact Utility tractor
Iseki built |
|---|
Production | |
|---|---|
Distributor | Challenger (a part of AGCO) |
Manufacturer | Iseki |
Compact Utility tractor | |
Built in Matsuyama, Japan | |
Original price was $25,000 in 2005 | |
Variants | |
|---|---|
1552 | similar Massey Ferguson model |
Challenger MT295B Engine | |
|---|---|
Iseki 3.0L 4-cyl diesel | |
Engine details ... |
Challenger MT295B Power | |
|---|---|
Engine (gross) | 52.1 hp
38.9 kW |
Engine (net) | 50 hp
37.3 kW |
PTO (claimed) | 41 hp
30.6 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | spur gear |
Differential lock | mechanical rear |
Power steering | |
Wet disc brakes | |
Two-post foldable ROPS. Cab optional with air-conditioning. | |
Capacity | |
|---|---|
Fuel | 13.2 gal
50.0 L |
Hydraulic system | 10 gal
37.9 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 10 gal
37.9 L |
Pressure | 2276 psi
156.9 bar |
Rear valves | 2 OptOptional |
Mid valves | 2 OptOptional |
Pump flow | 11.4 gpm
43.1 lpm |
Total flow | 16.2 gpm (sync shuttle)
61.3 lpm |
17.3 gpm (power shuttle/AutoPower)
65.5 lpm | |
Steering flow | 4.8 gpm (sync shuttle)
18.2 lpm |
5.9 gpm (power shuttle/AutoPower)
22.3 lpm | |
Steering press. | 2276 psi
156.9 bar |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | position and response control |
optional top-link draft control | |
Rear lift (at ends) | 3483 lbs
1579 kg |
Rear lift (at 24"/610mm) | 3086 lbs
1399 kg |
Rear Arms | telescopic link ends |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic wet disc |
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 76 inches
193 cm |
Weight | 3726 lbs
1690 kg |
Front tire | 9.5-16 |
Rear tire | 16.9-24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 40 |
Battery CCA | 710 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
MT200B Series published in 2005, by AGCO |
Engine
Engine Detail — 180.3 ci / 3.0 L Diesel
Manufacturer | Iseki E4DD |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 180.3 ci
3.0 L |
Bore/Stroke | 3.82x3.94 inches
97 x 100 mm |
Power (net) | 50 hp
37.3 kW |
Power (gross) | 52.1 hp
38.9 kW |
Fuel system | indirect injection |
Air cleaner | dual-stage dry |
Pre-heating | glow plugs |
Compression | 21.5:1 |
Rated RPM | 2600 |
Idle RPM | 975-2750 |
Starter volts | 12 |
Oil capacity | 8.5 qts
8.0 L |
Coolant capacity | 8 qts
7.6 L |
Transmission
Transmission options | |
|---|---|
8-speed | |
12-speed partially synchronized | |
12-speed partial power shift |
Transmission — SynchroShuttle
Transmission | SynchroShuttle |
Gears | 8 forward and reverse |
Clutch | dry |
Oil capacity | 40.2 qts
38.0 L |
Four non-synchronized gears in two non-synchronized ranges, with synchronized shuttle shift. | |
With 16.9x24 R1 rear tires. | |
![]() | |
Transmission — PowerShuttle
Transmission | PowerShuttle |
Type | partially synchronized |
Gears | 12 forward and reverse |
Clutch | dry main, wet shuttle |
Oil capacity | 40.2 qts
38.0 L |
Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch. | |
With 16.9-24 R1 rear tires. | |
![]() | |
Transmission — AutoPower IV
Transmission | AutoPower IV |
Type | partial power shift |
Gears | 12 forward and reverse |
Clutch | mechanical wet disc |
Oil capacity | 40.2 qts
38.0 L |
Four push-button power shift gears in three non-synchronized ranges. Power shuttle shifting with left-hand console lever. Only available on the MT295B with a cab. | |
With 16.9-24 R1 rear tires. | |
![]() | |
Dimensions
Challenger MT295B Tires | |
|---|---|
Ag front | 9.5-16 |
Ag rear | 16.9-24 |
Lawn/turf front | 27x10.50-15 |
Lawn/turf rear | 44x18.00-20 |
Industrial front | 10-16.5 |
Industrial rear | 17.5L-24 |
Dimensions | |
|---|---|
Wheelbase | 76 inches
193 cm |
Length | 132.7 inches
337 cm |
Width | 65.4 inches*Minimum width
166 cm |
Height (ROPS) | 89.1 inches
226 cm |
Ground clearance | 13.2 inches
33 cm |
Front axle | Flange: 55.7 inch length
1414 mm |
Flange rear axle | 48.8 inch length
1239 mm |
Challenger MT295B Weight | |
|---|---|
ROPS Shipping | 3726 lbs
1690 kg |
Max capacity | 8378 lbs
3800 kg |
Max front axle | 4630 lbs
2100 kg |
Max rear axle | 4630 lbs
2100 kg |
Attachments
Attachment overview | |
|---|---|
Front-end loader | |
Backhoe |
Challenger MH30B Backhoe | |
|---|---|
Backhoe type | Challenger MH30B Backhoe |
Transport height | 81.5 inches
207 cm |
Bucket width | 10 inches
25 cm |
12 inches
30 cm | |
16 inches
40 cm | |
24 inches
60 cm | |
37 inches
93 cm | |
Digging depth | 100 inches
254 cm |
Reach from pivot | 127 inches
322 cm |
Bucket Rotation | 165° |
Swing Arc | 180° |
Bucket force | 4160 lbs
1886 kg |
Dipperstick force | 2600 lbs
1179 kg |
Photos
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Challenger MT295B.
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Challenger MT295B Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Challenger MT295B.
Converted Equivalents:
Horsepower (HP)0 hp
Kilowatts (kW)0 kW
Metric Horsepower (PS / CV)0 PS
Direct Competitor Comparison
Compare Challenger MT295B against same-era industry alternatives in the same horsepower class.
Current Model
Challenger
Challenger MT295B
Engine Power:Diesel (net): 50 hp / 37.3 kW; Diesel (gross): 52.1 hp / 38.9 kW
★ Baseline Reference
Related models
Challenger MT275
- Power:
- 40.1
- Production years:
- 2003 - 2005
Challenger MT275B
- Power:
- 40.1
- Production years:
- 2005 - 2008
Challenger MT285
- Power:
- 40.1
- Production years:
- 2003 - 2005
Challenger MT295
- Power:
- 44.2
- Production years:
- 2003 - 2005
Challenger MT285B
- Power:
- 47.5
- Production years:
- 2005 - 2008





