Challenger MT297B

The Challenger MT297B is a tractor produced by Challenger. It is equipped with a 180 ci 3.0 L engine. The listed engine power is Diesel (listed): 59.1 hp / 44.1 kW. Transmission: PowerShuttle. Operating weight: 4,078 lbs 1849 kg.

Engine Power

Diesel (listed): 59.1 hp / 44.1 kW

Fuel & Capacities

13.2 gal 50.0 L

Transmission

PowerShuttle

Operating Weight

4,078 lbs 1849 kg

Overview

	2005 - 2008 MT200B SeriesCompact Utility tractorIseki built MT200B Series Compact Utility tractor Iseki built

Production
Distributor	Challenger (a part of AGCO)
Manufacturer	Iseki
Compact Utility tractor
Built in Matsuyama, Japan

Variants
1560	similar Massey Ferguson model

Challenger MT297B Engine
Iseki 3.0L 4-cyl diesel
Fuel tank	13.2 gal 50.0 L
Engine details ...

Challenger MT297B Transmission
12-speed
Transmission details ...

Challenger MT297B Power
Engine	59.1 hp 44.1 kW
PTO (claimed)	46.4 hp 34.6 kW

Mechanical
Four-wheel drive
Power steering
Wet disc brakes
Two-post folding ROPS.

Hydraulics
Type	open center
Pressure	2276 psi 156.9 bar
Pump flow	11.5 gpm 43.5 lpm
Total flow	17.5 gpm 66.2 lpm
Steering flow	6.0 gpm 22.7 lpm

Tractor hitch
Rear Type	II/I
Rear lift (at ends)	3748 lbs 1700 kg
Rear lift (at 24"/610mm)	3307 lbs 1500 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)

Dimensions & Tires
Wheelbase	79 inches 200 cm
Weight	4,078 lbs 1849 kg
Front tire	9.5-16
Rear tire	16.9-26
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 180 ci / 3.0 L Diesel

Manufacturer	Iseki
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	180 ci 3.0 L
Power	59.1 hp 44.1 kW
Rated RPM	2600
Starter volts	12

Transmission

Transmission — PowerShuttle

Transmission	PowerShuttle
Gears	12 forward and reverse
Three ranges with four gears each. Transmission can be shifted from forward to reverse on the go, without the clutch. In-range gear changes can be made on the go with the clutch.

Dimensions

Challenger MT297B Tires
Ag front	9.5-16
Ag rear	16.9-26
Industrial front	12-16.5
Industrial rear	18.4-24

Dimensions
Wheelbase	79 inches 200 cm
Length	134.6 inches 341 cm
Width	69.7 inches 177 cm
Height	91.7 inches 232 cm
Weight	4,078 lbs 1849 kg
Ground clearance	15.7 inches 39 cm

Photos

Challenger MT297B tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Challenger MT297B based on its 59.1 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	Small Square Baler (14x18")小方捆打捆机 (36x46 cm)	Medium Duty	Classic 2-string baler for horse and small livestock hay.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Challenger MT297B.

Estimated Continuous Field Runtime: 4.3 hrs

Approximately 4.3 hours of continuous field operation at ~75% rated power on a full tank (13.2 gal / 50 L).

Estimated 75% Load Fuel Burn~3.1 gal/hr (11.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours