Chamberlain Canelander

The Chamberlain Canelander is a tractor produced by Chamberlain. It is equipped with a 270 ci 4.4 L engine. The listed engine power is Diesel (listed): 62 hp / 46.2 kW. Transmission: 9 forward and 6 reverse. Operating weight: 7350 lbs 3333 kg.

Engine Power

Diesel (listed): 62 hp / 46.2 kW

Fuel & Capacities

19.5 gal 73.8 L

Transmission

9 forward and 6 reverse

Operating Weight

7350 lbs 3333 kg

Overview

	1959 - 1973 High-Clearance tractor

Production
Manufacturer	Chamberlain
High-Clearance tractor
Built in Welshpool, Australia

Chamberlain Canelander Engine
Perkins 4.4L 4-cyl diesel
Engine details ...

Chamberlain Canelander Power
Engine	62 hp 46.2 kW
Drawbar (claimed)	48 hp 35.8 kW
PTO (claimed)	55 hp 41.0 kW

Mechanical
Two-wheel drive
Manual steering
Mechanical expanding brakes
Open operator station.

Capacity
Fuel	19.5 gal 73.8 L
Hydraulic system	2.4 gal 9.1 L

Hydraulics
Type	open center
Capacity	2.4 gal 9.1 L
Pressure	1750 psi 120.7 bar
Pump flow	9.8 gpm 37.1 lpm

Tractor hitch
Rear Type	II
Rear lift (at ends)	3500 lbs 1587 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)
Engine RPM	540@1600

Dimensions & Tires
Wheelbase	92 inches 233 cm
Weight	7350 lbs 3333 kg
Front tire	7.50x18
Rear tire	14.9x38
Full dimensions and tires ...

References

Canelander published by Chamberlain

Engine

Engine Detail — 270 ci / 4.4 L Diesel

Manufacturer	Perkins 4-270D
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	270 ci 4.4 L
Bore/Stroke	4.25x4.75 inches 108 x 121 mm
Power	62 hp 46.2 kW
Pre-heating	thermostart
Compression	16:1
Rated RPM	2000
Starter volts	12

Transmission

Transmission options
9-speed gear
9-speed

Transmission — 9 forward and 3 reverse gear

Type	gear
Gears	9 forward and 3 reverse
Clutch	355.6mm dry disc

Transmission — 9 forward and 6 reverse

Gears

9 forward and 6 reverse

Dimensions

Chamberlain Canelander Tires
Ag front	7.50x18
Ag rear	14.9x38

Dimensions
Wheelbase	92 inches 233 cm
Length	149 inches 378 cm
Width	79 inches 200 cm
Height (steering wheel)	75.5 inches 191 cm
Operating weight	7350 lbs 3333 kg
Ballasted weight	9310 lbs 4223 kg
Ground clearance	26 inches 66 cm
Front tread	56 to 80 inches 142 to 203 cm
Rear tread	54 to 78.5 inches 137 to 199 cm

Photos

Chamberlain Canelander tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Chamberlain Canelander based on its 62 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	6 ft (72 in)1.8 m	Medium Duty	Medium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep	66 to 72 in165 - 180 cm	Medium Duty	Standard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage	7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙	Medium Duty	Field leveling and clod breaking behind plows.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Chamberlain Canelander.

Estimated Continuous Field Runtime: 6 hrs

Approximately 6 hours of continuous field operation at ~75% rated power on a full tank (19.5 gal / 73.8 L).

Estimated 75% Load Fuel Burn~3.2 gal/hr (12.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours