Claas Arion 510
The Claas Arion 510 is a tractor produced by Claas. It is equipped with a 276 ci 4.5 L engine. The listed engine power is Diesel (net): 115 hp / 85.8 kW. Transmission: CMATIC EQ 200. Operating weight: 13117 lbs 5949 kg.
Engine Power
Diesel (net): 115 hp / 85.8 kW
Fuel & Capacities
64 gal
242.2 L
Transmission
CMATIC EQ 200
Operating Weight
13117 lbs
5949 kg
Overview
 | 2017 -
Arion 500 SeriesRow-Crop tractor |
|---|---|
2017 - | |
Arion 500 Series | |
Row-Crop tractor | |
Production | |
|---|---|
Manufacturer | Claas |
Row-Crop tractor | |
Claas Arion 510 Engine | |
|---|---|
John Deere 4.5L 4-cyl diesel | |
Fuel tank | 64 gal
242.2 L |
Engine details ...  | |
Claas Arion 510 Power | |
|---|---|
Engine (net) | 115 hp
85.8 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | electro-hydraulic |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | load sensing |
Pressure | 2900 psi
200.0 bar |
Valves | 2 to 4 |
Pump flow | 29.1 gpm
110.1 lpm |
39.6 gpm ((Optional)
149.9 lpm | |
Tractor hitch | |
|---|---|
Rear Type | III |
Rear lift (at 24"/610mm) | 11244 lbs
5100 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | wet disc |
Rear PTO Type | 540/1000 (1.375) |
Front PTO | independent OptOptional |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 100.9 inches
256 cm |
Weight | 13117 lbs
5949 kg |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
References | |
|---|---|
 | |
Arion published in 2023, by Claas |
Engine
Engine Detail — 276 ci / 4.5 L Diesel
Manufacturer | John Deere |
Configuration | turbocharged intercooled diesel, 4-cylinder, liquid-cooled |
Displacement | 276 ci
4.5 L |
Bore/Stroke | 4.19x5.00 inches
106 x 127 mm |
Rated Power (net) | 115 hp
85.8 kW |
Maximum Power (net) | 125 hp
93.2 kW |
Rated RPM | 2200 |
Torque | 415 lb-ft
562.7 Nm |
Torque RPM | 1500 |
Starter | electric |
Starter volts | 12 |
Oil change | 500 h |
Transmission
Transmission options | |
|---|---|
24-speed six-speed power shift | |
continuously-variable transmission |
Transmission — Hexashift
Transmission | Hexashift |
Type | six-speed power shift |
Gears | 24 forward and reverse |
Six power shift gears in four ranges with power shuttle. | |
With 20.8R38 rear tires and 50 kph option. | |
 | |
Claas Arion 510 Transmission | |
|---|---|
 |
Transmission — CMATIC EQ 200
Transmission | CMATIC EQ 200 |
Type | continuously-variable transmission |
Gears | infinite forward and reverse |
Claas Arion 510 Transmission | |
|---|---|
 |
Dimensions
Claas Arion 510 Tires |
|---|
Dimensions | |
|---|---|
Wheelbase | 100.9 inches
256 cm |
Length | 174.9 inches
444 cm |
Height | 118.1 inches
299 cm |
Operating weight | 13117 lbs
5949 kg |
Max weight | 22597 lbs
10249 kg |
Photos
Claas Arion 510 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Claas Arion 510 based on its 115 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Claas Arion 510.
Estimated Continuous Field Runtime: 10.7 hrs
Approximately 10.7 hours of continuous field operation at ~75% rated power on a full tank (64 gal / 242.3 L).
Estimated 75% Load Fuel Burn~6 gal/hr (22.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Claas Arion 510 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Claas Arion 510.
Converted Equivalents:
Horsepower (HP)115 hp
Kilowatts (kW)85.8 kW
Metric Horsepower (PS / CV)116.6 PS
Direct Competitor Comparison
Compare Claas Arion 510 against same-era industry alternatives in the same horsepower class.
Current Model
Claas
Claas Arion 510
Engine Power:Diesel (net): 115 hp / 85.8 kW
★ Baseline Reference
Related models
Claas 446
- Power:
- 92
- Production years:
- 2003 - 2008
Claas Axos 330 C
- Power:
- 92
- Production years:
- 2008 - 2018
Claas Talos 240
- Power:
- 93.9
- Production years:
- 2013 - 2023
Claas 546
- Power:
- 96
- Production years:
- 2003 - 2005
Claas Elios 240
- Power:
- 96.6
- Production years:
- 2014 - 2020