Claas Axion 830
The Claas Axion 830 is a tractor produced by Claas. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Diesel (listed): 215 hp / 160.3 kW. Transmission: HEXASHIFT.
Engine Power
Diesel (listed): 215 hp / 160.3 kW
Fuel & Capacities
120 gal
454.2 L
Transmission
HEXASHIFT
Overview
 | 2018 -
Axion 800 SeriesRow-Crop tractor |
|---|---|
2018 - | |
Axion 800 Series | |
Row-Crop tractor | |
Production | |
|---|---|
Manufacturer | Claas |
Row-Crop tractor | |
Claas Axion 830 Engine | |
|---|---|
FPT 6.7L 6-cyl diesel | |
Fuel tank | 120 gal
454.2 L |
Exhaust fluid (DEF) | 11 gal
41.6 L |
Engine details ...  | |
Claas Axion 830 Transmission | |
|---|---|
24-speed power shift | |
Transmission details ...  |
Claas Axion 830 Power | |
|---|---|
Engine | 215 hp
160.3 kW |
PTO (claimed) | 209 hp
155.9 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Cab standard with air-conditioning. |
Hydraulics | |
|---|---|
Rear valves | 4 or 5 |
Front valves | 2 OptOptional |
Pump flow | 40 gpm
151.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | III |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Full dimensions and tires ...  |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 410.6 ci / 6.7 L Diesel
Manufacturer | FPT |
Configuration | turbocharged intercooled diesel, 6-cylinder, liquid-cooled |
Displacement | 410.6 ci
6.7 L |
Bore/Stroke | 4.09x5.20 inches
104 x 132 mm |
Emissions | Tier IV |
Emission control | selective catalytic reduction |
Power | 215 hp
160.3 kW |
Starter | electric |
Starter volts | 12 |
Oil change | 600 h |
Transmission
Transmission — HEXASHIFT
Transmission | HEXASHIFT |
Type | power shift |
Gears | 24 forward and reverse |
Six gears in four ranges with power shuttle. | |
Dimensions
Claas Axion 830 Tires |
|---|
Dimensions |
|---|
Photos
Claas Axion 830 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Claas Axion 830 based on its 215 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 5 to 7 Bottom (18")5 - 7 铧 (45 cm) | Commercial / Field Scale | Large acreage tillage; requires front ballast weights. |
Rotary Cutter / MowerMowing & Clearing | 15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼 | Commercial / Field Scale | Large commercial field and roadside mowing operations. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m) | Commercial / Field Scale | High-capacity commercial forage harvesting (1000 RPM PTO). |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Claas Axion 830.
Estimated Continuous Field Runtime: 10.7 hrs
Approximately 10.7 hours of continuous field operation at ~75% rated power on a full tank (120 gal / 454.2 L).
Estimated 75% Load Fuel Burn~11.2 gal/hr (42.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Claas Axion 830 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Claas Axion 830.
Converted Equivalents:
Horsepower (HP)215 hp
Kilowatts (kW)160.3 kW
Metric Horsepower (PS / CV)218 PS
Direct Competitor Comparison
Compare Claas Axion 830 against same-era industry alternatives in the same horsepower class.
Current Model
Claas
Claas Axion 830
Engine Power:Diesel (listed): 215 hp / 160.3 kW
★ Baseline Reference
Related models
Claas Arion 650
- Power:
- 175
- Production years:
- 2012 - 2026
Claas Arion 660
- Power:
- 175
- Production years:
- 2017 - 2026
Claas 826
- Power:
- 181
- Production years:
- 2002 - 2003
Claas Axion 800
- Power:
- 193
- Production years:
- 2014 - 2024
Claas Axion 810
- Power:
- 200
- Production years:
- 2018 - 2026