Craftsman 247.20419 Z6600
The Craftsman 247.20419 Z6600 is a tractor produced by Craftsman Lawn Tractors. It is equipped with a 725 cc 44.24 ci engine. The listed engine power is Engine Detail — 725 cc / 44.24 ci (gross): 24 hp / 17.9 kW. Transmission: infinite forward and reverse.
Engine Power
Engine Detail — 725 cc / 44.24 ci (gross): 24 hp / 17.9 kW
Fuel & Capacities
3 gal
11.4 L
Transmission
infinite forward and reverse
Overview
 | 2015 -
Zero-turn mowerMTD built |
|---|---|
2015 - | |
Zero-turn mower | |
MTD built | |
2015 - | |
|---|---|
Zero-turn mower | |
MTD built |
Production | |
|---|---|
Distributor | Craftsman (a part of Sears) |
Manufacturer | MTD |
Zero-turn mower | |
Original price was $3,850 in 2015 | |
Craftsman 247.20419 Engine | |
|---|---|
24HP Kohler 725cc 2-cyl | |
Fuel tank | 3 gal
11.4 L |
Engine details ...  | |
Craftsman 247.20419 Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
Mechanical | |
|---|---|
Steering | differential power |
Open operator station. | |
Power Take-off (PTO) | |
|---|---|
Mid PTO | independent |
Clutch | electric |
Dimensions & Tires | |
|---|---|
Wheelbase | 37 inches
93 cm |
Front tire | 13x5-6 |
Rear tire | 18x9.5-8 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
| 2015 -
Zero-turn mowerMTD built |
|---|---|
2015 - | |
Zero-turn mower | |
MTD built | |
2015 - | |
|---|---|
Zero-turn mower | |
MTD built |
Engine Detail — 725 cc / 44.24 ci
Manufacturer | Kohler |
Configuration | 2-cylinder |
vertical-shaft V-Twin | |
Displacement | 725 cc
44.24 ci |
Bore/Stroke | 3.3x2.6 inches
84 x 66 mm |
Power (gross) | 24 hp
17.9 kW |
Starter | electric |
Starter volts | 12 |
Transmission
| 2015 -
Zero-turn mowerMTD built |
|---|---|
2015 - | |
Zero-turn mower | |
MTD built | |
2015 - | |
|---|---|
Zero-turn mower | |
MTD built |
Transmission — infinite forward and reverse hydrostatic
Type | hydrostatic |
Gears | infinite forward and reverse |
 | |
Dimensions
| 2015 -
Zero-turn mowerMTD built |
|---|---|
2015 - | |
Zero-turn mower | |
MTD built | |
2015 - | |
|---|---|
Zero-turn mower | |
MTD built |
Craftsman 247.20419 Tires | |
|---|---|
Lawn/turf front | 13x5-6 |
Lawn/turf rear | 18x9.5-8 |
Dimensions | |
|---|---|
Wheelbase | 37 inches
93 cm |
Length | 84 inches
213 cm |
Height | 35.5 inches
90 cm |
Attachments
| 2015 -
Zero-turn mowerMTD built |
|---|---|
2015 - | |
Zero-turn mower | |
MTD built | |
2015 - | |
|---|---|
Zero-turn mower | |
MTD built |
54" Mower deck | |
|---|---|
Cutting width | 54 inches
137 cm |
Cut height | 1 to 4 inch
2 to 10 cm |
Photos
Craftsman 247.20419 Z6600 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Craftsman Lawn Tractors Craftsman 247.20419 Z6600 based on its 24 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Craftsman Lawn Tractors Craftsman 247.20419 Z6600.
Estimated Continuous Field Runtime: 2.4 hrs
Approximately 2.4 hours of continuous field operation at ~75% rated power on a full tank (3 gal / 11.4 L).
Estimated 75% Load Fuel Burn~1.2 gal/hr (4.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Craftsman Lawn Tractors Craftsman 247.20419 Z6600 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Craftsman Lawn Tractors Craftsman 247.20419 Z6600.
Converted Equivalents:
Horsepower (HP)24 hp
Kilowatts (kW)17.9 kW
Metric Horsepower (PS / CV)24.3 PS
Direct Competitor Comparison
Compare Craftsman 247.20419 Z6600 against same-era industry alternatives in the same horsepower class.
Current Model
Craftsman Lawn Tractors
Craftsman 247.20419 Z6600
Engine Power:Engine Detail — 725 cc / 44.24 ci (gross): 24 hp / 17.9 kW
★ Baseline Reference
Related models
Craftsman lawn tractors 247.28884
- Power:
- 19.5
- Production years:
- 2011 - 2013
Craftsman lawn tractors 247.28902
- Power:
- 19.5
- Production years:
- 2010 - 2010
Craftsman lawn tractors 917.25051
- Power:
- 19.5
- Production years:
- 1995 - 1995
Craftsman lawn tractors 917.25052
- Power:
- 19.5
- Production years:
- 1995 - 1995
Craftsman lawn tractors 917.27081
- Power:
- 19.5
- Production years:
- 1998 - 2000