Daedong DK75
The Daedong DK75 is a tractor produced by Daedong. It is equipped with a 243.4 ci 4.0 L engine. The listed engine power is Diesel (listed): 75 hp / 55.9 kW. Transmission: 12 forward and reverse. Operating weight: 6,735 lbs 3054 kg.
Engine Power
Diesel (listed): 75 hp / 55.9 kW
Fuel & Capacities
22.7 gal
85.9 L
Transmission
12 forward and reverse
Operating Weight
6,735 lbs
3054 kg
Overview
 |
|---|
Production | |
|---|---|
Manufacturer | Daedong |
Built in Korea | |
Daedong DK75 Engine | |
|---|---|
Perkins 4.0L 4-cyl diesel | |
Fuel tank | 22.7 gal
85.9 L |
Engine details ...  | |
Daedong DK75 Transmission | |
|---|---|
12-speed | |
Transmission details ...  |
Daedong DK75 Power | |
|---|---|
Engine | 75 hp
55.9 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Steering | hydrostatic power |
Wet disc brakes | |
Hydraulics | |
|---|---|
Valves | 4 |
Total flow | 8.6 gpm
32.6 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 5,002 lbs
2268 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Dimensions & Tires | |
|---|---|
Wheelbase | 84.3 inches
214 cm |
Weight | 6,735 lbs
3054 kg |
Front tire | 11.2-24 |
Rear tire | 18.4-30 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 243.4 ci / 4.0 L Diesel
Manufacturer | Perkins |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 243.4 ci
4.0 L |
Power | 75 hp
55.9 kW |
Compression | 16.5:1 |
Rated RPM | 2200 |
Transmission
Transmission — 12 forward and reverse
Gears | 12 forward and reverse |
Dimensions
Daedong DK75 Tires | |
|---|---|
Ag front | 11.2-24 |
Ag rear | 18.4-30 |
Dimensions | |
|---|---|
Wheelbase | 84.3 inches
214 cm |
Length | 170.1 inches
432 cm |
Width | 79.7 inches
202 cm |
Height | 104.5 inches
265 cm |
Weight | 6,735 lbs
3054 kg |
Ground clearance | 19.5 inches
49 cm |
Photos
Daedong DK75 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Daedong DK75 based on its 75 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Daedong DK75.
Estimated Continuous Field Runtime: 5.8 hrs
Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (22.7 gal / 85.9 L).
Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Daedong DK75 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Daedong DK75.
Converted Equivalents:
Horsepower (HP)75 hp
Kilowatts (kW)55.9 kW
Metric Horsepower (PS / CV)76 PS
Direct Competitor Comparison
Compare Daedong DK75 against same-era industry alternatives in the same horsepower class.
Current Model
Daedong
Daedong DK75
Engine Power:Diesel (listed): 75 hp / 55.9 kW
★ Baseline Reference
Related models
Daedong DK561
- Power:
- 64
Daedong DK65
- Power:
- 65
Daedong FX751
- Power:
- 67.1
Daedong DK751
- Power:
- 72.4
Daedong DK752
- Power:
- 72.4
- Production years:
- 2007 - 2017