Deutz D 8006
The Deutz D 8006 is a tractor produced by Deutz. It is equipped with a 345 ci 5.7 L engine. The listed engine power is Diesel (listed): 80 hp / 59.7 kW. Transmission: 16 forward and 7 reverse. Operating weight: 7086 lbs 3214 kg.
Engine Power
Diesel (listed): 80 hp / 59.7 kW
Fuel & Capacities
24.3 gal
92.0 L
Transmission
16 forward and 7 reverse
Operating Weight
7086 lbs
3214 kg
Overview
 | 1967 - 1978
06 Series |
|---|
Production | |
|---|---|
Manufacturer | Deutz |
Variants | |
|---|---|
D8006 | 2WD |
D8006A | 4WD |
Deutz D 8006 Engine | |
|---|---|
Deutz 5.7L 6-cyl diesel | |
Fuel tank | 24.3 gal
92.0 L |
Engine details ...  | |
Deutz D 8006 Transmission | |
|---|---|
16-speed | |
Transmission details ...  |
Deutz D 8006 Power | |
|---|---|
Engine | 80 hp
59.7 kW |
Drawbar (tested) | 69.48 hp
51.8 kW |
PTO (tested) | 85.51 hp
63.8 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential hydraulic shoe brakes | |
ROPS optional. Cab optional with heat. |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 9.2 gpm
34.8 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift (at ends) | 7,937 lbs
3600 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | live |
independent OptOptional | |
Rear PTO Type | 540/1000 |
1000 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 100.4 inches
255 cm |
Weight | 7086 lbs
3214 kg |
Front tire | 7.50-20 |
2WD Rear tire | 16.9-34 |
Full dimensions and tires ...  | |
Belt Pulley | |
|---|---|
Diameter | 11 inches
27 cm |
Width | 7 inches
17 cm |
RPM | 1390 |
Speed | 4000 ft/min
1219.20 meters/min |
References | |
|---|---|
 | |
Tractor D 8006 published by Deutz |
Engine
Engine Detail — 345 ci / 5.7 L Diesel
Manufacturer | Deutz F6L 912 |
Fuel Type | Diesel |
Configuration | 6-cylinder, air-cooled |
Displacement | 345 ci
5.7 L |
Bore/Stroke | 3.937x4.72 inches
100 x 120 mm |
Power | 80 hp
59.7 kW |
Air cleaner | dry |
Compression | 17:1 |
Rated RPM | 2100 |
Starter volts | 12 |
Transmission
Transmission — 16 forward and 7 reverse
Gears | 16 forward and 7 reverse |
 | |
Dimensions
Deutz D 8006 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 7.50-20. Rear: 16.9-34 |
4WD Standard tires (ag) | Front: 12.5-20. Rear: 16.9-34 |
Dimensions | |
|---|---|
Wheelbase | 100.4 inches
255 cm |
2WD Length | 163.6 inches
415 cm |
4WD Length | 161 inches
408 cm |
Width | 78.5 inches
199 cm |
Height (ROPS) | 107.9 inches
274 cm |
Height (exhaust) | 108.3 inches
275 cm |
Operating weight | 7086 lbs
3214 kg |
Ballasted weight | 11060 lbs
5016 kg |
Ground clearance | 20.5 inches
52 cm |
Tests
Nebraska Tractor Test 1074 | |
|---|---|
Diesel 16-speed 2WD
August 17 - September 2, 1971
Link: Nebraska Tractor Test 1074 file | |
PTO performance | |
Power at rated engine speed | 85.51 hp
63.8 kW |
Fuel use | 5.1 gal/hour
19.3 l/hour |
Power at rated PTO speed | 82.18 hp
61.3 kW |
Fuel use | 4.9 gal/hour
18.5 l/hour |
Drawbar performance | |
Max power | 69.48 hp
51.8 kW |
Fuel use | 5.0 gal/hour
18.9 l/hour |
Gear 11 used for power test. | |
Max pull | 8,898 lbs
4036 kg |
Gear 8 used for pull test. | |
Photos
Deutz D8006 with Fahr combine.
Deutz D8006A with Fahr combine.
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz D 8006 based on its 80 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz D 8006.
Estimated Continuous Field Runtime: 5.8 hrs
Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (24.3 gal / 92 L).
Estimated 75% Load Fuel Burn~4.2 gal/hr (15.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz D 8006 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz D 8006.
Converted Equivalents:
Horsepower (HP)80 hp
Kilowatts (kW)59.7 kW
Metric Horsepower (PS / CV)81.1 PS
Direct Competitor Comparison
Compare Deutz D 8006 against same-era industry alternatives in the same horsepower class.
Current Model
Deutz
Deutz D 8006
Engine Power:Diesel (listed): 80 hp / 59.7 kW
★ Baseline Reference
Related models
Deutz D 6806
- Power:
- 67
- Production years:
- 1974 - 1981
Deutz D 7206
- Power:
- 70
- Production years:
- 1974 - 1981
Deutz D 7006
- Power:
- 71
- Production years:
- 1969 - 1974
Deutz D 7506
- Power:
- 75
- Production years:
- 1968 - 1970
Deutz D 8005
- Power:
- 80
- Production years:
- 1965 - 1966