Deutz-Allis 8050

The Deutz-Allis 8050 is a tractor produced by Deutz Allis. It is equipped with a 426 ci 7.0 L engine. The rated power output is 152.40 hp 113.6 kW. Transmission: Power Shift. Operating weight: 15305 to 16300 pounds.

Overview

	1985 - 1988 Row-Crop tractor
1985 - 1988
Row-Crop tractor

Series map: 9150↑ 1989-1990803080508070148.6hp*169.3hp*189.7hp*8050↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8050 is the same as the Allis Chalmers 8050. The following data is from the 8050 listing.

Production
Manufacturer	Deutz-Allis
Row-Crop tractor
Built in West Allis, Wisconsin, USA
Total built	2,336
Original price	$58,411

Deutz-Allis 8050 Engine
Allis Chalmers 7.0L 6-cyl diesel
Engine details ...

Deutz-Allis 8050 Power
Drawbar (tested)	131.44 hp 98.0 kW
PTO (tested)	152.40 hp 113.6 kW
Performance test details ...

Mechanical
Two- or four-wheel drive
Differential lock	electro-hydraulic rear
Steering	hydrostatic power
Differential hydraulic wet discs brakes
Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player.

Capacity
Fuel	60 gal 227.1 L
	25 gal (optional tank) 94.6 L
Rear diff.	66.8 qts 63.2 L

Hydraulics
Type	closed-center load-sensitive
Valves	2 or 3
Pump flow	22 gpm 83.3 lpm
	13.5 gpm (transmission) 51.1 lpm
Total flow	45 gpm 170.3 lpm
Steering flow	9.5 gpm 36.0 lpm

Tractor hitch
Rear Type	III/II
Rear lift (at 24"/610mm)	6680 lbs 3030 kg
	8200 lbsOptOptional 3719 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000
	1000 OptOptional

Dimensions & Tires
2WD Wheelbase	106 inches 269 cm
4WD Wheelbase	96 inches 243 cm
Weight	15305 to 16300 pounds
Front tire	10.00-16
Rear tire	18.4-38
Full dimensions and tires ...

Electrical
Charging system	alternator
Charging amps	100
Battery volts	12

Engine

Series map: 9150↑ 1989-1990803080508070148.6hp*169.3hp*189.7hp*8050↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8050 is the same as the Allis Chalmers 8050. The following data is from the 8050 listing.

Engine Detail — 426 ci / 7.0 L Diesel

Manufacturer	Allis Chalmers 670I
Configuration	turbocharged intercooled diesel, 6-cylinder, liquid-cooled inline
Displacement	426 ci 7.0 L
Bore/Stroke	4.25x5.00 inches 108 x 127 mm
Air cleaner	dry
Compression	15.5:1
Rated RPM	2300
Starter volts	12
Oil capacity	19 qts*With two oil filters 18.0 L
	21 qts*With three oil filters 19.9 L
Coolant capacity	32 qts 30.3 L

Transmission

Series map: 9150↑ 1989-1990803080508070148.6hp*169.3hp*189.7hp*8050↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8050 is the same as the Allis Chalmers 8050. The following data is from the 8050 listing.

Transmission options
20-speed partial power shift
12-speed Allis-Chalmers

Transmission — Allis-Chalmers Power Director

Transmission	Allis-Chalmers Power Director
Type	partial power shift
Gears	20 forward and 4 reverse
Oil capacity	29.6 qts 28.0 L
Five gears (1-5) in two ranges (slow/fast) with a two-speed power shift (low/high) controlled by left-hand lever.
With 18.4x38 rear tires.

Transmission — Power Shift

Transmission	Power Shift
Type	Allis-Chalmers
Gears	12 forward and 2 reverse
Oil capacity	29.6 qts 28.0 L
Six power shift gears (1-6) in two ranges (slow/fast). Clutch must be used to shift range. Pressing the clutch pedal half-way automatically downshifts from 5th/6th to 4th gear.
With 18.4x38 rear tires.

Dimensions

Series map: 9150↑ 1989-1990803080508070148.6hp*169.3hp*189.7hp*8050↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8050 is the same as the Allis Chalmers 8050. The following data is from the 8050 listing.

Deutz-Allis 8050 Tires
Ag front	10.00-16 (2WD)
	13.6-28 (4WD)
Ag rear	18.4-38
Ag front	11.00-16 (2WD)
	14L-16 (2WD)
	18.4-16 (2WD)
	14.9-28 (4WD)
	14.9-24 (4WD)
Ag rear	20.8-38
	18.4-42
	16.9-38

Dimensions
2WD Wheelbase	106 inches 269 cm
4WD Wheelbase	96 inches 243 cm
Length	187 inches 474 cm
Width	95.5 inches 242 cm
	119.5 inches (long axle) 303 cm
4WD Clearance (front axle)	17.5 inches 44 cm
2WD Clearance (front axle)	22 inches 55 cm
Clearance (rear axle)	28 inches 71 cm

Deutz-Allis 8050 Weight
2WD	15305 lbs 6942 kg
4WD	16300 lbs 7393 kg
Ballasted	19380 lbs 8790 kg

Deutz-Allis 8050 Height
Hood	69 inches 175 cm
Cab	115 inches 292 cm
Exhaust	113 inches 287 cm

Tests

Series map: 9150↑ 1989-1990803080508070148.6hp*169.3hp*189.7hp*8050↓ 1982-1985*Estimated engine power for comparison only.

Note: the Deutz-Allis model 8050 is the same as the Allis Chalmers 8050. The following data is from the 8050 listing.

Nebraska Tractor Test 1448
Diesel 12-speed 2WD September 1 - 17, 1982 Link: Nebraska Tractor Test 1448 file
PTO performance
Power at rated engine speed	152.40 hp 113.6 kW
Fuel use	9.7 gal/hour 36.7 l/hour
Power at rated PTO speed	155.15 hp 115.7 kW
Fuel use	9.8 gal/hour 37.1 l/hour
Drawbar performance
Max power	131.44 hp 98.0 kW
Fuel use	9.6 gal/hour 36.3 l/hour
Gear 1F used for power test.
Max pull	16,728 lbs 7587 kg
Gear 2S used for pull test.

Photos

Deutz-Allis 8050 tractor photo